多层住宅生活消防共用给水系统的几点思考

文中就多层住宅生活、消防共用系统的技术经济问题进行了讨论。提出了采用紧急关闭水阀和合理选用变频泵等技术措施。为共用系统的功能发挥和运行可靠提供了保障。     

基元阀在汽轮机进汽阀研究中的应用

阀碟型线对汽轮机进汽阀的性能影响很大，本文设计了三种形式的基元阀，通过数值模拟手段研究了阀碟型线对流场的影响；得出了不同阀碟形式的性能．     

液压传动系统设计中的几个关键问题

文章分析研究了液压传动系统设计中的几个关键性问题。     

改善液晶光阀投影光学系统偏振特性的理论设计方法

定量分析了液晶光阀投影光学系统中影响系统对比度的主要因素，利用矢量方法建立三维空间数学模型对光线进行追迹，并利用琼斯矩阵和矢量光学的原理分析了偏振器件--主要是波片--和各种光学薄膜对光学系统性能的影响。给出了在一定假设条件下的对没有波片的光学系统和插入波征后的光学系统的仿真计算结果。两组数据比较表明在光路中插入合适相位差的波片可以显著提高系统对比度等性能。     

实现汽车发动机可变气门相位的新方法

介绍一种用于双顶置凸轮轴式发动机的采用两级谐波传动的新型进气凸轮轴调相机构。它由输入刚轮（正时带轮）、柔轮、输出刚轮（与进气凸轮轴联接）、固定波发生器、动波发生器和步进电机等组成。用步进电机驱动动波发生器可改变输出、输入刚轮的相对位置，从而改变进气相位。该机构能在很大角度范围内，以小步长实现多级调相，轴向尺寸小，转动惯量小，控制驱动功率小。２００ｈ试验表明，该机构工作可靠，能够准确地根据控制信号进行凸轮轴的调相。     

大型阀门动水关闭试验与分析

本文介绍了Ф2500蝴蝶阀的动水关闭试验试验的方法和过程,描述了试验过程中出现的各种现象及产生的原因.     

对承压设备安全阀使用中几个问题的探讨

对承压设备安全阀使用中存在的几个问题进行了探讨,并提出相应的解决措施。     

Magnetoresistance of Fe3O4/Au/Fe3O4 and Fe3O4/Au/Fe spin-valve structures

A detailed study of the in-plane magnetotransport properties of spin valves with one and two Fe₃O₄ electrodes is presented. Fe₃O₄/Au/Fe₃O₄ spin valves exhibit a clear anisotropic magnetoresistance in small magnetic fields but no giant magnetoresistance (GMR). The absence of GMR in these structures is due to simultaneous magnetization reversal in the two Fe₃O₄ layers. By contrast, a negative GMR effect is measured on Fe₃O₄/Au/Fe spin valves. The negative GMR is attributed to an electron spin scattering asymmetry at the Fe₃O₄/Au interface or an induced spin scattering asymmetry in the Au interfacial layers.     

Flow injection system with in-line Winkler's procedure using 16-way valve and spectrofluorimetric determination of dissolved oxygen in environmental waters

Flow injection spectrofluorimetry with in-line Winklers procedure was developed for the dissolved oxygen (DO) determination. 2-Thionaphthol reacted with iodine produced by Winkler’s method to form fluorescence inactive disulfide compound. To automate the process completely, a 5-channel flow system with a newly designed 16-way valve was assembled. The system consisted of a dispersion coil (DC), a precipitate formation coil (PFC), a precipitate dissolving coil (PDC), and extraction coil (EC). A calibration can be constructed by using a standard iodine solution for dissolved oxygen. The calibration graph was linear over the range 1.2×10⁻⁴∼6.0×10⁻⁴ mol l⁻¹ iodine (1.96∼9.80 mg O l⁻¹)). The relative standard deviation (n=6) was below 0.3% for the 4×10⁻⁴ mol l⁻¹ iodine (6.27 mg O l⁻¹) determination. The sample throughput was 12/h.