交变磁场对磁性磨粒的作用分析

对处于交变磁场作用下的磁性磨料颗粒的受力和运动规律进行了分析和描述，为交变磁场作用下的磁粒研磨光整加工技术提供了新的思路和工艺选择。     

Effect of absorbed pump power on the quality of output beam from monolithic microchip lasers

The dependence of the beam propagation factor (M ² parameter) with the absorbed pump power in the case of monolithic microchip laser under face-cooled configuration is extensively studied. Our investigations show that the M ₂ parameter is related to the absorbed pump power through two parameters (α and β) whose values depend on the laser material properties and laser configuration. We have shown that one parameter arises due to the oscillation of higher order modes in the microchip cavity and the other parameter accounts for the spherical aberration associated with the thermal lens induced by the pump beam. Such dependency of M ² parameter with the absorbed pump power is experimentally verified for a face-cooled monolithic microchip laser based on Nd³⁺ -doped GdVO₄ crystal and the values of α and β parameters were estimated from the experimentally measured data points.     

瓣形均匀带电面在其直径处的电势分布

从点电荷的电势计算公式出发推导出了瓣形均匀带电面在其直径处的电势分布.进一步讨论了均匀带电半球面在其底面以及均匀带电球面内部和外部的电势分布.     

Kolmogorov Width of Classes of Smooth Functions on the Sphere

Let ^d−1{(x₁,…,x_d) ^d:x²₁+···+x²_d=1} be the unit sphere of the d-dimensional Euclidean space ^d. For r>0, we denote by B^r_p (1p∞) the class of functions f on ^d−1 representable in the formwhere dσ(y) denotes the usual Lebesgue measure on ^d−1, and P^λ_k(t) is the ultraspherical polynomial.For 1p,q∞, the Kolmogorov N-width of B^r_p in L^q( ^d−1) is given bythe left-most infimum being taken over all N-dimensional subspaces X_N of L^q( ^d−1).The main result in this paper is that for r2(d−1)²,where A_NB_N means that there exists a positive constant C, independent of N, such that C⁻¹A_NB_NCA_N.This extends the well-known Kashin theorem on the asymptotic order of the Kolmogorov widths of the Sobolev class of the periodic functions.     

Fine Dry Grinding of Zeolite in a Laboratory Ball Mill

This paper presents the importance and usage of natural zeolites, which was recently recognized in the industry. Therefore, the grinding properties of natural zeolite were studied with the emphasis on a kinetic study in a ball mill. The experimental mill employed was laboratory sized, 200 mm diameter, 191 mm length, providing a total mill volume of 6000 cm³, with a total mass of 5.62 kg of steel balls of 25 mm diameter with a charge of 20% of the mill volume and with a rotation speed of 76 rpm. The breakage parameters were determined by using single sized feed fractions of ?850+600 μm, ?600+425 μm, and ?425+300 μm for the zeolite samples. The S_i (specific rate of breakage) and B_{i, j} (primary breakage distribution) values were obtained for those feed size fractions in order to predict the product size distributions by simulation for comparison to the experimental data. From the experimental results, S_i values increased as the feed sizes became coarser, i.e., the highest S_i value was 0.85 min^?1 for ?850+600 μm, while the lowest S_i value was 0.65 min^?1 for ?425+300 μm feed ground in the mill. The B_{i, j} values obtained for the zeolite sample were γ=0.84, ?=0.61, and β=4.25. The breakage parameters obtained showed that the zeolite is broken faster than quartz and slower than calcite and barite in terms of the a_T values reported previously at the same experimental conditions. The simulations of the product size distributions of zeolite were in good agreement with the experimental data using a standard ball mill simulation program. The slowing‐down effect was also seen in the mill after 4 min. of grinding.     

A simplified green chemistry approach to the Biginelli reaction using ‘Grindstone Chemistry’

Grindstone Chemistry--a greatly evolved version of Toda’s method of grinding solids together for solvent-free chemical reactions--has been described and its usefulness illustrated by the successful application of this technique to a simplified process for conducting the multi-component Biginelli reaction for the synthesis of physiologically active tetrahydropyrimidinones.     

纳米KMn8O16粉体的室温固相合成与表征

室温或近室温固相反应要求绿色化、清洁化[1,2]。我们以KMnO4和MnCl2·4H2O为原料,用室温固相氧化还原反应制备氧化锰粉体时,得到了一种对H2O2分解具有较高催化活性的纳米KMn8O16粉体,用XRD、SEM、IR等技术对其进行了表征,发现研磨时间对粉体性能有显著影响。1　实验部分1 1　粉体的制备按摩尔比(2∶3)准确称取一定量的分析纯KMnO4和MnCl2·4H2O,分别置于玛瑙研钵中充分研细,再混合研磨,固相反应立即发生,体系颜色逐渐加深,并有刺激性气体产生,充分研磨后70℃恒温12h,固相产物依次经水洗至中性、醇洗、抽滤,真空干燥得黑色粉…     

A mild and simple synthesis of N-aryl substituted toluenesulfamides under solvent-free conditions

N- aryl substituted benzenesulfamides are often used as heating-sensitive recording material1, thermal printing material2, sensitizer3 and developer4. Moreover, some of the benzenesulfamides have antifungal activities5. Many methods have been described for preparation of sulfamides. They are used to carry out in solvent8 or in solid phase condition9. These methods required solvent or solid support and even required heating or cooling. At the same time, the process of these methods is complex. Now we have developed a new method to prepare N-aryl substituted toluenesulfamides under solvent-free conditions.In recent years, solvent-free technology has gained popularity in organic synthesis. For instance,solidstate reaction and microwave reaction have received considerable attention. Solvent-free synthesis of amides has been reported10-11. This technology has many advantages such as high efficiency and selectivity, easy separation and environmental acceptability. All these merits are in accord with green chemistry's requirements of energy-saving, high efficiency and environmental benefits.In our paper, we used a simple and efficient method for preparing N-aryl substituted toluenesulfamides under solvent-free conditions, as a replacement for classic solvent, which gives many environmental benefits.All reactions were completed at room temperature by co-grinding in an agate mortar for 3-20min and the results are shown in Table 1.In conclusion, we have developed an efficient and convenient method of preparation N-aryl substituted toluenesulfamides in high yields. It symbols an improvement for synthesis of benzenesulfamides.     

CMW1型外铲磨机PC控制及应用

研究铲磨机各种运动和控制要求，设计出继电控制与ＰＣ控制相结合的电气控制系统。此系统在电路设计、电气柜安装、调试维修和操作等方面满足了设计要求。铲磨加工过程的ＰＣ控制解决了转轮流道三维表面成形运动的控制难题。ＰＣ控制程序基本满足了铲磨工艺要求。     

Scattering relations for point‐source excitation in chiral media

A spherical electromagnetic wave propagating in a chiral medium is scattered by a bounded chiral obstacle which can have any of the usual properties. Reciprocity and general scattering theorems, relating the scattered fields due to scattering of waves from a point source put in any two different locations are established. Applying the general scattering theorem for appropriate locations and polarizations of the point source we prove an associated forward scattering theorem. Mixed scattering relations, relating the scattered fields due to a plane wave and the far‐field patterns due to a spherical wave, are also established. Copyright © 2005 John Wiley & Sons, Ltd.