Thermal gradient induced sidebranching in directional solidification

The polycrystalline perovskitelike manganese oxides La_1-xA_xMnO (A = Na, and K, ) have been fabricated by sol-gel technique. For all the compositions explored in this work, the average manganese oxidation state is practically constant, at for A = Na, and for A = K, respectively. A close relationship is confirmed to hold between the Curie temperature (T_c) and the bond distance of Mn-O. Results of magnetic measurements show that these materials can be utilized as suitable candidates for magnetic refrigerants with wide applied temperature span, for their significant entropy change and the easily tuned Curie temperature. Received: 12 September 1997 / Revised: 18 December 1997 / Accepted: 21 January 1998     

新型锆质不定形耐火材料的研制

以废旧电熔锆刚玉为主要原料,采用合理的粒度级配,应用复合结合剂和外加剂以凝聚结合的方式研制成功具有高荷重软化温度、高强度、低气孔率、低烧结线变化的新型锆质不定形耐火材料。图4,表4,参3。     

SA耐火材料多晶结构与性能的研究

本实验采用磨具废砂和炉皮SiC废砂生产SA耐火材料，通过XRD分析和计算机处理确定各试样中的晶相（4H－SiC，33R－SiC，3C－SiC，α－Al2O3，β-石英和Al6Si2O13）及其各相的含量。通过材料性能与结构综合分析，确定较好的配方，其含量：磨具废砂50％，炉皮砂45％，结合剂5％，外加矿化剂2％。     

涂层对热电偶热电性能及大气中寿命的影响

在难熔金属热电偶表而施加涂层的目的,旨在使原仅限和真空、中性及还原气氛中测量的热电偶能在大气中使用.本文讨论涂层对难熔金属热电偶在氧化气氛的"热电势—温度","热电势—时间"的关系及其寿命的影响.具有涂层的W/M.热电偶在氧化气氛(常压下1500℃取得263小时±1%t的最高记录,而W-Re热电偶存1500℃试验的前70小时偏差也在1%t内.而没有涂层的热电偶仅支持数分钟便破坏.     

Ultra-trace analysis of U,Th, Ca and selected heavy metals in high purity refractory metals with isotope dilution mass spectrometry

A method for the determination of trace impurities (U, Th, Ca, Fe, Cr, Ni, Cu, and Cd) in the refractory metals molybdenum and tungsten with isotope dilution mass Spectrometry (IDMS) has been developed. This method enables determinations of uranium and thorium down to the lowest pg/g level with high precision and accuracy. Selective chromatographic, extractive and electrolytic methods for the trace-matrix separation were combined with positive thermal ionization mass spectrometry. Different samples of high purity (4N) and of ultra high purity (UHP) materials for advanced technologies were analysed. The detection limits reached are (in ng/g): U 0.006, Th 0.008, Ca 10, Fe 19, Cr 0.5, Ni 0.6, Cu 2.7, and Cd 0.12. A comparison of results with other sensitive analytical methods (ICP-MS, GDMS, SIMS) makes obvious the urgent necessity of a reliable calibration method like IDMS because the analytical results obtained by the other methods often spread over a wide range.     

Development of xylose-fermenting yeasts for ethanol production at high acetic acid concentrations

Mutants resistant to comparatively high levels of acetic acid were isolated from the xylose-fermenting yeastsCandida shehatae andPichia stipitis by adapting these cultures to increasing concentrations of acetic acid grown in shake-flask cultures. These mutants were tested for their ability to ferment xylose in presence of high acetic acid concentrations, in acid hydrolysates of wood, and in hardwood spent sulfite liquor, and compared with their wild-type counterparts and between themselves. TheP. stipitis mutant exhibited faster fermentation times, better tolerance to acid hydrolysates, and tolerance to lower pH.     

Calorimetric studies of refractory corundum

Calorimetry has been used in the investigations of calcium aluminate materials produced as a binder for aluminate-corundum composites of high refractoriness. The kinetics and of hydration process was thus characterized and the optimum compositions of initial binders and cement-corundum refractory filler blends could be selected for further tests. The acceleration of heat evolution - the shortening of so-called induction period and relatively high heat output in the presence of corundum was observed. It means the acceleration of hydration process, that is early crystallisation of hydration products and subsequent further dissolution of initial anhydrous aluminate phases. In the presence of fine grained corundum particles these phenomena should be attributed to the nucleating effect of fine corundum particles. This revised version was published online in July 2006 with corrections to the Cover Date.     

Topical Problems in Elemental Analysis of Advanced Ceramic Materials

Selected prominent problems in the analysis of advanced ceramic materials are surveyed. The importance of reliability of results is discussed in the field of elemental trace- and microanalysis in view of its interaction with economy, power of detection, local resolution and speciation selectivity. Particular problems in the analysis of major constituents, trace components and microlocal distributions are based on the striking propertics of ceramics; they are exemplified. Analytical assistance must start from the beginning of the production processing, in the preparation of the powdered base materials. Determination of the stoichiometry requires high accuracy and differentiation of chemical species in bulk and surface analysis of ceramic base powders. Element trace determination by direct instrumental methods requires standard reference materials for calibration; these are currently inavailable in a sufficient variety. For optimum reliability and power of detection, element traces must be prepared in isolated form in a small excitation volume for analysis. A review on the state-of-the-art of wet-chemical combined procedures is presented. Decomposition position procedures are emphasized, due to their risk of contributing severe systematic error. Combustion in elementary fluorine is presented for decomposition of refractory materials. The performance of some direct procedures is discussed. Very efficient methods are available for element trace determinations in ceramic materials, offering high detection power. Several approaches for high-resolution local microanalysis in non-conductive ceramic materials are identified as the most promising development in the analysis of sintered compact ceramic products and devices.     

难浸金矿扩大试验研究

对黔西南州高砷高硫难浸金矿进行二段焙烧预处理，采用氧化剂强化氰金进行扩大试验研究。结果表明：该工艺使金的浸出率达到85％以上，该工艺投资省，无环境污染。     

Bioactive Compounds and Antioxidant Activity from Spent Coffee Grounds as a Powerful Approach for Its Valorization

Coffee is one of the world’s most popular beverages, and its consumption generates copious amounts of waste. The most relevant by-product of the coffee industry is the spent coffee grounds, with 6 million tons being produced worldwide per year. Although generally treated as waste, spent coffee grounds are a rich source of several bioactive compounds with applications in diverse industrial fields. The present work aimed at the analysis of spent coffee grounds from different geographical origins (Guatemala, Colombia, Brazil, Timor, and Ethiopia) for the identification of bioactive compounds with industrial interest. For this purpose, the identification and quantification of the bioactive compounds responsible for the antioxidant activity attributed to the spent coffee grounds were attempted using miniaturized solid-phase extraction (µ-SPEed), combined with ultrahigh-performance liquid chromatography with photodiode array detection (UHPLC-PDA). After validation of the µ-SPEed/UHPLC-PDA method, this allowed us to conclude that caffeine and 5-caffeoylquinic acid (5-CQA) are the most abundant bioactive compounds in all samples studied. The total phenolic content (TPC) and antioxidant activity are highest in Brazilian samples. The results obtained show that spent coffee grounds are a rich source of bioactive compounds, supporting its bioprospection based on the circular economy concept closing the loop of the coffee value chain, toward the valorization of coffee by-products.