考虑多种损坏构成特征的沥青路面预防性养护决策方法

由于沥青路面损坏构成的多样性, 相同的路面状况指数(pavement condition index, PCI)可能代表不同的损坏组合. 当多种损坏并存且损坏程度接近时, 用PCI和主导损坏(最严重、扣分最多的路面损坏)难以得到具有针对性的养护对策. 因此, 通过对PCI的深入分析, 明确了主导损坏代表性不足的路段, 以现行预防性养护决策方法为基础, 补充了一种考虑损坏构成特征、更具针对性的决策方法. 以上海城市道路近5年的检测、养护数据为分析基础, 首先利用有序聚类算法将路段按PCI水平分组, 分析了不同阶段路面损坏构成和差异水平; 然后, 针对多种损坏并存且损坏差异不显著的路段, 根据预防性养护的实施效果筛选了能够反映正确预防性养护经验的有效养护路段; 最后, 基于有效养护路段建立并对比分析了2个基于BP(back propagation)神经网络的养护决策模型. 结果表明: 当PCI水平介于优良(84.4~93.0分)时, 不同损坏程度接近, 主导损坏代表性不足; 考虑多种损坏构成特征的BP神经网络模型表现出更高的决策精度, 测试集决策正确率达86.20%, 优于仅考虑主导损坏的模型(58.50%). BP神经网络与传统决策树法结合能够优化沥青路面决策过程, 提高养护对策选取的针对性.     

实时系统开发与PEARL语言

本文讨论了实时系统的特征、开发方法、设计工具、实现手段工具等开发过程中的主要问题,论述了实时系统开发语言PEARL及该语言的对实时系统的主要支持.     

桅杆结构数据采集软件

文章介绍了桅杆结构数据采集软件的编制 ,并基于HY -8021多功能数据采集板与光电位置传感器的特性 ,使得该软件可满足以低频振动为主的建筑工程结构数据采集的要求。     

利用ICAP／4仿真系统进行电子电路虚拟实验

以串联型稳压电源为例，介绍利用数／模混合电路仿真软件系统ICAP／4进行虚拟实验及故障诊断的方法，并给出仿真波形。     

Calibrating software reliability models when the test environment does not match the user environment

Software failures have become the major factor that brings the system down or causes a degradation in the quality of service. For many applications, estimating the software failure rate from a user's perspective helps the development team evaluate the reliability of the software and determine the release time properly. Traditionally, software reliability growth models are applied to system test data with the hope of estimating the software failure rate in the field. Given the aggressive nature by which the software is exercised during system test, as well as unavoidable differences between the test environment and the field environment, the resulting estimate of the failure rate will not typically reflect the user‐perceived failure rate in the field. The goal of this work is to quantify the mismatch between the system test environment and the field environment. A calibration factor is proposed to map the failure rate estimated from the system test data to the failure rate that will be observed in the field. Non‐homogeneous Poisson process models are utilized to estimate the software failure rate in both the system test phase and the field. For projects that have only system test data, use of the calibration factor provides an estimate of the field failure rate that would otherwise be unavailable. For projects that have both system test data and previous field data, the calibration factor can be explicitly evaluated and used to estimate the field failure rate of future releases as their system test data becomes available. Copyright © 2002 John Wiley & Sons, Ltd.     

基于自适应预测滤波理论的模数转换器设计方法

基于自适应差分量化理论，提出了在不增加转换位数的情况下提高模数转换器(ADC)动态范围的一种设计方法。该方法通过量化输入与预测的差值来获得预测增益，从而扩大ADC的动态范围；通过差分量化值与预测值相加得到输出信号，并将该分别采用LMS和RLS算法进行处理．得到输入信号的预测值．计算机模拟结果证实，上述两种算法均能使模数转换器的动态范围提高约25dB．比较而言，RLS算法收敛速度更快，收敛性更好，但计算量较大．     

对求解非线性方程方法的探索

BaiCL在2001年提出了双曲函数法，并把解设成具体的双曲函数，即sinhw和coshw的线性组合．本文把解设成是由2个函数f(ξ)和g(ξ)组成的线性组合，它们可以有多种取法，从而使方程更直接、更有效．借助数学软件Maple，用改进后的方法和吴文俊消元法，求解Bai C L文中的一个例子，获得了包含Bai文结果在内的更为丰富、精确的行波解．     

Static extracting method of software intended behavior based on API functions invoking

The method of extracting and describing the intended behavior of software precisely has become one of the key points in the fields of software behavior＇s dynamic and trusted authentication. In this paper, the author proposes a specified measure of extracting SIBDS （software intended behaviors describing sets） statically from the binary executable using the software＇s API functions invoking, and also introduces the definition of the structure used to store the SIBDS in detail. Experimental results demonstrate that the extracting method and the storage structure definition offers three strong properties： （i） it can describe the software＇s intended behavior accurately; （ii） it demands a small storage expense; （iii） it provides strong capability to defend against mimicry attack.     

开源软件在网络教育中的应用

论述了在教育领域中使用开源软件的必要性,介绍了几种应用于网络教育的开源软件,主要包括服务器软件、工作站软件和课程管理系统。     

基于PLC现场数据采集与分析

介绍了PLC控制器的可行性分析,阐述了基于PROFIBUS工业以太网数据采集的研究,并提出了基于PLC现场数据采集与分析的方法。