链式输送竹片软化机研究

简述了链式输送竹片软化机的设计指导思想和设计方案，重点介绍软化机的构成，参数的确定以及它的优点。     

A study of electrostatic spring softening for dual-axis micromirror

Electrostatic spring softening is an important characteristic of electrostatically actuated dual-axis micromirror, since it lowers the resonant frequencies. This paper presents an approach based on approximating the electrostatic forces by the first-order Taylor's series expansion to investigate this characteristic. The dual-axis micromirror studied in this paper has three motion modes, two torsional (about x- and y-axis, respectively) and one translational (about z-axis). The stiffnesses of all these modes are softened by a DC bias voltage applied to the mirror plate. The resonant frequencies are lowered with the increment of the bias voltage. The relationship of the bias voltage and the resonant frequencies of all the motion modes is derived. The analytical results show that the resonant frequency curves are affected by the capacitor geometries, i.e. the gap between the mirror plate and the electrodes and the electrodes size. The lowering curves drop slowly when the bias voltage is small. While for large bias voltage, the lowering curves drop rapidly. The experiment results are consistent with those obtained by the analytical approach.     

土法造纸木素降解之探索Ⅲ.嫩毛竹自然发酵过程中的细菌分离鉴定与嫩竹软化菌的筛选

试验证实,嫩毛竹自然发酵过程中的微生物主要是细菌。分离出并纯化了１００株细菌,其中６０株是芽胞杆菌。将分离出的１００株细菌分别接入石灰预处理过的嫩竹,从中筛选出能使嫩竹进一步软化的菌株３株,也均为芽胞杆菌。对这６０株芽胞杆菌进行了形态学及其生理生化特征的鉴定,按Ｐｒｉｅｓｔ氏等（１９８８年）的数值分类系统分类到组,将３株（３０８,３０９,３１０）对嫩竹软化有明显作用的芽胞杆菌的１株（３０８）鉴定到种,认为是短小芽胞杆菌（Ｂ．ｐｕｍｉｌｕｓ）。另外４０株非芽胞杆菌参阅《伯杰氏系统细菌学手册》第１卷和第２卷,鉴定到科或属,有微球菌、葡萄球菌、李氏杆菌、不动杆菌、肠杆菌科等。     

Laser Raman spectroscopic study of photoreaction dynamics in p -chloro cinnamic acid crystal

Raman phonon spectroscopy has been used to study photodimerization reaction inp-chloro cinnamic acid (pCCA) crystal. The β-form of the crystal yields the 4,4′-dichloro-β-truxinic acid dimer. Six distinct low frequency phonon bands are observed in thepCCA monomer crystal. On reaction progress, these bands show a monotonic shift to lower frequencies and broaden out. Finally, in the dimer crystal the phonon spectrum shows two weak broad bands. These results suggest that the reaction is homogeneous in the initial stages and, as the product concentration increases, the lattice becomes highly disordered. The reactant and the product were characterised by infrared and Raman spectroscopy. The disappearance of aliphatic C=C bond stretching vibration and appearance of cyclobutane ring deformation and cyclobutane ring-breathing vibrations on reaction confirm photodimerization by cyclobutane ring formation. The large Stoke's shift between the absorption and emission band suggest strong exciton-phonon coupling in the monomer lattice. This reaction seems to be phonon-mediated.     

Thermal analysis of low alloy Cr-Mo steel

The paper deals with results of thermal analysis of low-alloyed chromium-molybdenum steel. The methods of analysis were dilatometry, differential thermal analysis (DTA) and differential scanning calorimetry (DSC). The Ac₁ and Ac₃ temperatures of the steel samples measured by dilatometry and DTA during the heating period were in good agreement. Generated by cooling a martensitic structure first became apparent at 503 K. Tempering of the as-quenched samples showed the presence of the second tempering stage in the region between 473 and 573 K. At that stage heat capacity decreased from 0.48 to 0.32 J g^-1 K^-1, as a result of conversion of transition carbide due to heat consumption. After normalization of the as-quenched samples the heat capacity values were restored to between 0.42 and 0.47 J g^-1 K^-1 in the temperature range from 373 to 673 K. This revised version was published online in August 2006 with corrections to the Cover Date.     

Miscibility of PVC/PMMA blends by vicat softening temperature, viscometry, DSC and FTIR analysis

 This paper deals with the miscibility of polyvinyl chloride (PVC) with polymethyl methacrylate (PMMA). Blends of variable compositions from 0 to 100 wt% were prepared in the presence (15, 30 and 50 wt%) and in the absence of di ethyl- 2 hexyl phtalate as plasticizer. Their miscibility was investigated by using various analytical methods: determination of the Vicat softening temperature, a viscometry method based on the criterion of polymer–polymer miscibility, differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). The results show that the plot of Vicat temperature against composition is a continuous curve, indicating the miscibility of the blend. The viscometry method and DSC find that the two polymers are miscible up to about 60 wt% of PMMA. This miscibility is due to a specific interaction of hydrogen bonding type between carbonyl groups (C=O) of PMMA and hydrogen from (CHCl) groups of PVC, as evidenced by FTIR spectroscopy. The two-band deconvolution shows an increase in associated groups percentage in the domain of miscibility.     

One-dimensional model with rotational and liquid-crystalline phase transitions

A one-dimensional system of hard-rod particles with rotational-like internal degrees of freedom is considered. Particles interact with each other through the infinite-range, infinitely weak attractive Kac potential, and through a nearest-neighbor short-range potential. The latter depends also on the internal states of the interacting particles. Exact results for thermodynamic properties and for some correlation functions are obtained. It is found that the considered system exhibits several first-order transitions between phases with different rotational structure, i.e., with different ordering with respect to the internal degrees of freedom. The calculated equation of state seems to suggest that in the solutions of liquid-crystalline substances in neutral solvents there may exist regions in which the coefficient of thermal expansion is negative—an effect similar to that well known in liquid water.     

20CrMnTi结构钢热变形行为及其数学模型

利用Gleeble-1500热模拟实验机研究了20CrMnTi结构钢在温度为1223～1243K，变形速率为0．01～5s^-1条件下的热变形行为．通过奥氏体再结晶动力学回归计算了20CrMnTi的形变激活能，以及峰值应力与变形温度、应变速率之间的关系；提出采用加工硬化率-应变(θ-ε)图可以准确地判断该钢发生动态软化的类型，并可以确定动态再结晶开始和结束以及最大软化率时所对应的应变．给出了反映该钢动态再结晶进行过程的动态再结晶状态图，以及动态再结晶开始时间和完全再结晶时间与形变温度的关系图，并回归出了20CrMnTi钢的再结晶动力学方程．     

软土震陷特性的试验研究

基于饱和软粘性土与福建标准砂的静力孔压软化试验和动三轴震陷试验的分析研究，揭示了饱和松砂的软化应变具有突变性，当其孔压比小于某一限值时基本无软化现象，而饱和软粘性土则呈现随孔压增长而渐软化的特点。按文中建议的软化试验与动三轴震陷试验结果的对比，可区分震陷中的软化应变和惯性应变，为进一步综合分析计算土体由这两种应变形成的震陷奠定了基础。     

高炉软熔带形态变化的物理模拟

利用三维动态热模型探讨了高炉内软熔带的形态及形成位置。实验结果表明，随中心矿焦比降低，软熔带形状由Ｗ型向倒Ｖ型转变。当采用中心加焦布料方式时能形成充分发展的倒Ｖ型软熔带。总矿焦比增加时，软熔带顶点降低，根部升高，形状度Ｉ增大，无因次高度ｈ顶减少，料柱阻力增加。