Reciprocating sliding wear behavior of laser-clad small amplitude Mo2Ni3Si/NiSi metal silicide composite coatings

Mo₂Ni₃Si/NiSi metal silicide composite coatings with a fine microstructure consisting of Mo₂Ni₃Si primary dendrites and the interdendritic Mo₂Ni₃Si/NiSi eutectics were fabricated on austenitic stainless steel AISI 321 by laser cladding process. Small amplitude reciprocating sliding wear resistance of the coatings is evaluated as functions of normal load and slip amplitude and the wear mechanisms were discussed based on worn surface morphology observations. Results showed that the Mo₂Ni₃Si/NiSi coatings have excellent small amplitude reciprocating sliding wear resistance.     

Relationship between the dynamic softening transition and wet sliding friction of elastomer compounds

For properly chosen elastomer compounds, thermorheological characterization is combined with an examination of the variation of the wet sliding friction with temperature. A conceptual argument leads to the assumption that the wet sliding friction should maximize at the energy dissipation peak associated with the dynamic softening transition at a characteristic frequency determined by the sliding speed and the effective smallest surface asperity scale. The dynamic softening transition is characterized with the peak in tan δ/G′ⁿ, where tan δ is the loss tangent, G′ is the elastic modulus, and n is a constant between 0 and 1. The William–Landel–Ferry transform is uncritically applied for extrapolating the position of the peak in tan δ/G′ⁿ at high frequencies. Even based on the criterion of tan δ, the results obtained on a concrete surface indicate that the effective smallest asperity scale is of order of 100 μm. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2467–2478, 2004     

基于径向基函数神经网络的Lorenz混沌系统滑模控制

针对受参数不确定和外扰影响的混沌Lorenz系统，提出一种基于径向基函数（RBF）神经网 络的滑模控制方法.基于被控系统在不稳定平衡点处状态误差的可控规范形，设计滑模切换 面并将其作为神经网络的唯一输入.单入单出形式的RBF控制器隐层只需7个径向基函数，网 络的权值则依滑模趋近条件在线确定.仿真表明该控制器对系统参数突变和外部干扰具有鲁棒性，同时抑制了抖振. 关键词： 混沌控制 滑模 径向基函数神经网络 Lorenz系统     

基于MPEG-4的视频流式传输系统及动态带宽分配方法

提出了一个基于MPEG 4精细可分级编码技术的视频流式传输系统。介绍了系统中主要模块的作用,并重点研究了速率控制模块。速率控制模块采用了适合视频流式传输的动态带宽分配方法。它可以根据实时的网络通道波动状况来动态调整滑动参数,以适应网络波动和高效地利用网络的有限资源。实验结果表明,动态带宽分配方法在动态带宽波动条件下不仅可以使相邻帧间的视频质量更加平滑,而且可以大大提高解码视频图像的总体质量,也就是说可同时改善解码视频的主客观性能。     

圆形池壁滑模提升系统设计与施工

本阐述了郑州污水处理厂等直径钢筋混凝土消化池，采用滑升模板施工，连续浇筑混凝土提高工效，经过满水和闭气试验，符合设计要求，保证工程质量．取得较好的结果。     

Phase Separation Driven by a Fluctuating Two-Dimensional Self-Affine Potential Field

We study phase separation in a system of hard-core particles driven by a fluctuating two-dimensional self-affine potential landscape which evolves through Kardar–Parisi–Zhang (KPZ) dynamics. We find that particles tend to cluster together on a length scale which grows in time. The final phase-separated steady state is characterized by an unusual cusp singularity in the scaled correlation function and a broad distribution for the order parameter. Unlike the one-dimensional case studied earlier, the cluster-size distribution is asymmetric between particles and holes, reflecting the broken reflection symmetry of the KPZ dynamics, and has a contribution from an infinite cluster in addition to a power law part. A study of the surface in terms of coarse-grained depth variables helps understand many of these features.     

Simulation of single‐ and two‐phase flows on sliding unstructured meshes using finite volume method

The paper presents an efficient finite volume method for unstructured grids with rotating sliding parts composed of arbitrary polyhedral elements for both single‐ and two‐phase flows. Mathematical model used in computations is based on the ensemble averaged conservation equations. These equations are solved for each phase and in case of single‐phase flow reduce to the transient Reynolds‐averaged Navier–Stokes (TRANS) equations. Transient flow induced by rotating impellers is thus resolved in time. The use of unstructured grids allows an easy and flexible meshing for the entire flow domain. Polyhedral cell volumes are created on the arbitrary mesh interface placed between rotating and static parts. Cells within the rotating parts move each time step and the new faces are created on the arbitrary interfaces only, while the rest of the domain remain ‘topologically’ unchanged. Implicit discretization scheme allows a wide range of time‐step sizes, which further reduce the computational effort. Special attention is given to the interpolation practices used for the reconstruction of the face quantities. Mass fluxes are recalculated at the beginning of each time step by using an interpolation scheme, which enhances the coupling between the pressure and velocity fields. The model has been implemented into the commercially available CFD code AVL SWIFT (AVL AST, SWIFT Manual 3.1, AVL List GmbH, Graz, Austria, 2002). Single‐phase flow in a mixing vessel stirred by a six‐bladed Rushton‐type turbine and two‐phase flow in aerated stirred vessel with the four‐blade Rushton impeller are simulated. The results are compared with the available experimental data, and good agreement is observed. The proposed algorithm is proved to be both stable and accurate for single‐phase as well as for the two‐phase flows calculations. Copyright 2004 John Wiley & Sons, Ltd.     

su(1,1)代数的无限维Schwinger实现

运用su(1,1)代数的无限维Bose和Fermi算符实现,得到对称和反对称无限维矩阵的行列式.     

甘肃洒勒山成速滑坡的基本特征及其形成的动力学机制

本文首先讨论了该滑坡的形态、结构和运动的基本特征,指出:(1)该滑坡可分为特点截然不同的两部分。上滑体,可称为滑动铲部分,滑动时此部分滑体主要沿较陡的滑面发生整体性的转动滑移,垂直位移分量较显著。下滑体,可称为碎屑流部分,滑动时此部分滑体基本上呈近水平的运动;(2)主滑面呈上陡下缓渐转水平的座椅状;(3)滑坡的发展具有“推落式”的特点,上滑体是主动部分,它的突然失稳和下滑是推动下滑体运动的主要动力,(4)此滑坡的产生是斜坡变形累进性发展的结果,滑坡后缘拉裂缝的发展经等速开裂、加速开裂和裂缝闭合等三个阶段,最终导致大滑动。文中根据后缘拉裂缝等速开裂的资料,导出了一个预测滑动发生时间的公式。还根据现场证据进一步分析了造成此类滑坡高速远滑的两个机制:滑动铲机制和碎屑流效应,并根据所提出的机制导出了一个预测此类滑坡最大滑速的公式。