Fluid‐structure coupling of linear elastic model with compressible flow models

Cavitation erosion is caused in solids exposed to strong pressure waves developing in an adjacent fluid field. The knowledge of the transient distribution of stresses in the solid is important to understand the cause of damaging by comparisons with breaking points of the material. The modeling of this problem requires the coupling of the models for the fluid and the solid. For this purpose, we use a strategy based on the solution of coupled Riemann problems that has been originally developed for the coupling of 2 fluids. This concept is exemplified for the coupling of a linear elastic structure with an ideal gas. The coupling procedure relies on the solution of a nonlinear equation. Existence and uniqueness of the solution is proven. The coupling conditions are validated by means of quasi‐1D problems for which an explicit solution can be determined. For a more realistic scenario, a 2D application is considered where in a compressible single fluid, a hot gas bubble at low pressure collapses in a cold gas at high pressure near an adjacent structure.     

基于弦振动测量金属细线的线密度

提出了一种测量金属细线线密度的新方法,并对测量原理、公式进行了较为详细的推导,将测量结果与标准值进行了比较.从测量结果可知,其相对误差较小,说明利用该方法测量细线的线密度确实可行.     

城市治理首要应加强市民的思想道德建设——以湛江市治理交通秩序为例

交通混乱既影响城市形象,又制约经济发展。本文通过对湛江市区交通混乱现象进行深入调查研究,认为要从根本上改变这一现状,取得长效成果,除了采取行政立法、经济处罚、改善交通基础设施等治理措施外,还应着重加强市民的道德建设,提高其思想道德素质,培养市民良好的社会道德行为习惯。文章旨在为加强湛江市民道德建设,解决湛江及其它城市突出交通问题提供参考。     

几乎无偏刘估计的不可容许性

考虑了线性回归模型中,在Fisherian和Mahalanobis损失函数下,几乎无偏刘估计对于最小二乘估计的不可容许性;结论表明:几乎无偏刘估计在Mahalanobis损失函数下是不可容的;最后进行了数值模拟来表明结果.     

“二三结合”开发模式渗流特征研究

L油田B区块开展"二三结合"实验区,"二三结合"开发模式渗流特征对区块的合理高效开发具有重要意义。为了明确其渗流特征,利用油藏数值模拟软件Eclipse建立代表意义的油藏数值模型,研究区块"二三结合"开发模式下原射孔层和补孔层的渗流特征,分析了"二三结合"开发模式下,不同开发阶段综合含水率、采出程度、井底压力、地层压力及含水饱和度的变化特征。研究表明,"二三结合"开发模式先通过水驱开发挖潜原射孔层剩余油,提高厚油层顶部剩余油的采出程度,再通过聚合物驱进一步提高开发效果,通过水驱与聚驱的综合作用,最终得到较好的开发效果。     

Synthesis of self‐healing polyurethane urea‐based supramolecular materials

Supramolecular polyurethane ureas are expected to have superior mechanical properties primarily due to the reversible, noncovalent interactions such as hydrogen bonding interactions. We synthesized polyurethane prepolymers from small molecular weight of poly(tetramethylene ether)glycol and isophorone diisocyanates, which were end capped with propylamine to synthesize polyurethane ureas with high contents of urea and urethane groups for hydrogen‐bonding formations to facilitate self‐healing. The effects of polyurethane urea molecular weight (3000 ≤ M_n ≤ 9000), crosslinking, and cutting direction were studied in terms of thermal, mechanical, and morphological properties with an emphasis on the self‐healing efficiency. It was found that the thermal self‐healability was more pronounced as the molecular weight of polyurethane urea decreased, showing a maximum of more than 96% with 3000 M_n when the sample was cut along the stretch direction. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 468–474     

连续刚构铁路桥收缩徐变效应监测与分析

对连续刚构铁路桥箱梁温度场及桥梁线形进行长期、连续监测,通过主梁跨中下挠的理论与实测对比揭示了连续刚构铁路桥收缩徐变效应。对比了国内外常用收缩徐变估算模型,选择CEB-FIP徐变模型对黄河特大连续刚构桥进行了有限元分析。采用实测温度数据,以箱梁内测温度、外侧温度、顶底板温度梯度、左右侧温度梯度作为箱梁温度场的评判指标,对箱梁1年内的四季温度场分布进行分析。在基于相同温度场的条件下,通过理论值与实测值对比,发现分析成果与实测结果较吻合,说明混凝土的收缩徐变是引起连续刚构铁路桥跨中下挠的主要原因,对比结果还说明通过改善箱梁顶底板应力差能够改善收缩徐变长期效应。     

基于培养卓越应用型人才的线性代数问题驱动与案例任务教学模式改革

本文分析了现行线性代数的教学问题,提出了问题驱动与案例任务相结合的教学模式,并以两个案例来说明了此种教学模式的优越性,培养了学生的应用和创新能力,提高了学生的学习兴趣与课堂教学质量.     

金属间化合物(Mg,Zn)_(12)Ce与(Mg,Zn)_(11)Ce的研究

对300℃时Mg-Zn-Ce系富镁侧化合物的成分特征、结构和相平衡关系进行了研究.结果表明,Mg-Zn-Ce富镁角存在一个Mg12Ce的二元置换固溶体(Mg,Zn)12Ce,还存在一个三元线性化合物(Mg,Zn)11Ce(τ相).(Mg,Zn)12Ce中Zn的范围为0~7.3%(原子分数),其晶体结构为体心四方晶格.三元线性化合物τ相含Zn为8.5%~43.5%(原子分数),其晶体结构为C底心正交晶格.(Mg,Zn)12Ce和τ相均与α(Mg)存在稳定的两相平衡,且在Mg-Zn-Ce系富镁角还存在三相平衡Mg+(Mg,Zn)12Ce+τ.