半潜式钻井平台螺旋桨修复技术的应用研究进展

针对半潜式海洋钻井平台推进器螺旋桨面临的空泡腐蚀、电化学腐蚀以及海洋生物附着污损等问题，综述了焊接、粘接、热喷涂、冷喷涂修复技术的应用研究进展。认为目前的螺旋桨修复再制造技术普遍存在着修复层应力集中、结合强度低、孔隙率高、高温导致材料变性等缺陷，今后的研究工作应向着避免应力集中、增大修复层结合强度、降低作业温度、减小孔隙率的方向发展，以期能够制备更加致密均匀的修复层。     

环氧-呋喃防护材料的研制

碳化是引起水工钢筋混凝土钢筋锈蚀的重要因素之一．用糠醛、丙酮作活性稀释剂的环氧一呋喃涂料、玻璃钢与混凝土复合使用，粘接性能好，机械性能优良，防碳化、冻融能力强，与混凝土的弹性模量接近，能有效阻止混凝土碳化、钢筋(钢丝网)锈蚀．经过20余项工程应用及10余年的考验效果良好．     

椭圆偏振法研究四方氧化锆对Zr-Sn-Nb合金氧化膜耐腐蚀性能的影响

将经过不同热处理的Zr-Sn-Nb合金样品放在350℃、16．8mol／LPa、0．01mol／LLiOH溶液的高压釜中进行腐蚀。用椭圆偏振法研究氧化膜中的四方氧化锆，发现经过580℃／冷轧／500℃处理的样品在腐蚀42天和190天后氧化膜中的四方氧化锆比其它样品的多。四方氧化锆是影响合金耐腐蚀性能的一个主要因素，四方氧化锆的形成有利于提高合金的耐腐蚀性能。     

氯离子对碳钢在混凝土孔隙液中腐蚀行为的影响

采用重量法、线性伏安扫描法、弱极化法和SEM,研究C l-对碳钢在模拟混凝土孔隙液(饱和Ca(OH)2溶液)中的腐蚀行为的影响.结果表明,高pH值的混凝土孔隙液能减缓氯离子对碳钢的腐蚀;当pH≥13.6时,在NaC l浓度小于3%的混凝土孔隙液中,碳钢表面因生成钝化膜而不被腐蚀;当pH≤9时,混凝土孔隙液中无论是否存在C l-,碳钢均会被腐蚀;当pH=12.5时,混凝土孔隙液中NaC l浓度小于0.05%,碳钢则不被腐蚀;当混凝土孔隙液中的C l-浓度达到临界氯离子浓度时,碳钢表面的钝化膜开始损坏而被腐蚀,碳钢的腐蚀速度随着C l-浓度的增加而增大.     

Mossbauer investigations of corrosion environment influence on Fe valence states in oxide films of zirconium alloys

Mössbauer investigations about iron atom redistribution in oxide films of zirconium alloys subjected to corrosion at 500°C in pure oxygen and water pair have been analysed. The alloys were also subjected to autoclave conditions at a pressure of 10.0 MPa and autoclave conditions at 350°C and at a pressure of 16.8 MPa, using distilled water and water with additives of lithium and fluorine. It is shown that, depending on the corrosion environment, various compounds of iron, such as α-Fe₂O₃, Fe₃O₄, and FeO, as solid solutions of iron in ZrO₂ are formed in oxide films.     

The origin of the formation of cavities in galvanized coatings

The role of water‐soluble corrosion products on galvanized wires was examined. The samples used were industrial hot‐dip galvanized wires, which were exposed to the open air under all weather conditions for a relatively short time (6 and 12 months), in an urban environment close to the sea. The samples were studied by different methods, i.e. scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD) and optical microscopy (OM). Several phases were detected because of the galvanization procedure and the steel substrate. Furthermore, phases which were formed as a result of the reaction of zinc with the atmosphere were also detected. These were oxides like ZnO, carbonates like ZnCO₃ and hydrated Zn and Fe sulfates. Their presence influences the corrosion resistance of the wires, which finally, strongly depends on the solubility of the wires in water. The SO₄^2? compounds especially are very soluble and consequently are easily removed from the coating surface, leading to its degradation by the formation of cavities. In any case, their presence, even after a short period of exposure, implies that the coating is highly affected by the atmosphere of the modern city. Copyright © 2006 John Wiley & Sons, Ltd.     

Holographic interferometry as electrochemical emission spectroscopy of a carbon steel in 5–20 ppm TROS C-70 inhibited seawater

In the present investigation, holographic interferometry was utilized for the first time to determine the rate change of the number of the fringe evolutions during the corrosion test of a carbon steel in blank seawater and seawater with different concentrations of a corrosion inhibitor. In other words, the anodic dissolution behaviors (corrosion) of the carbon steel were determined simultaneously by holographic interferometry, as an electromagnetic method, and by the electrochemical impedance (EI) spectroscopy, as an electronic method. So, the abrupt rate change of the number of the fringe evolutions during corrosion tests, EI spectroscopy, of the carbon steel is called electrochemical emission spectroscopy. The corrosion process of the steel samples was carried out in blank seawater and seawater with different concentrations, 5–20 ppm, of TROS C-70 corrosion inhibitor using the EI spectroscopy method, at room temperature. The electrochemical-emission spectra of the carbon steel in different solutions represent a detailed picture of the rate change of the anodic dissolution of the steel throughout the corrosion processes. Furthermore, the optical interferometry data of the carbon steel were compared to the data, which was obtained from the EI. spectroscopy. Consequently, holographic interferometry is found very useful for monitoring the anodic dissolution behaviors of metals, in which the number of the fringe evolutions of the steel samples can be determined in situ.     

新型水泥干法窑筒体腐蚀与防腐的研究

通过对国内新型水泥干法窑筒体腐蚀现象分析及实验室的模拟实验，认为，硫、氯、碱是筒体腐蚀的主要因素，进行筒体涂层，可以抑制筒体腐蚀。     

Surface-enhanced Raman scattering study of polymer on metals. III. Chemisorbed polybenzimidazole and its corrosion-inhibiting properties at high temperature

Chemisorption of polybenzimidazole on silver and copper etched with nitric acid has been observed by surface-enhanced Raman scattering (SERS). The polymer is found to react chemically with silver, forming a complexed film on the surface. The SERS spectra show that polybenzimidazole film inhibits oxidation of the metal at high temperature, unlike chemisorbed benzimidazole, benzotriazole, and poly(4-vinyl pyridine). © 1992 John Wiley & Sons, Inc.     

Fe_3Al的抗高温氧化和耐热腐蚀性能

在７００℃与８５０℃的高温下，Ｆｅ＿３Ａｌ金属间化合物表面形成了Ａｌ＿２Ｏ＿３保护膜，使其抗氧化性能远优于不妨钢，２％Ｃｒ（原子百分比）加入Ｆｅ＿３Ａｌ会导致氧化过程初期氧化速率的增高，在熔融的硫酸盐和高压锅炉的烟气中，Ｆｅ＿３Ａｌ的耐热腐蚀性能优于高温合金ＧＨ１３２．