动态规划确定化学反应器序列最小占用时间的方法

通过用动态规划给出化学反应器序列最小占用时间的设计方法,提出了一个过程的最优化输出设计,该设计在输出产品浓度给定的条件下建立问题的基本设计量和数学模型,利用动态规划原则确定各阶段的占用时间,使总的占用时间为最小值,能够合理的确定各阶段反应器的体积以取得较好的经济效应.图3,表1,参8.     

Inorganic Sol-Gel Preparation of Medium Sized Microparticles of Li2TiO3 from TiCl4 as Tritium Breeding Material for Fusion Reactors

Microspheres of Li₂TiO₃ were fabricated by a classical, inorganic sol-gel process from commercially available TiCl₄. Elaborated process consists of the following main steps: (1) dissolving of TiCl₄ in concentrated aqueous HCl and addition of LiOH; (2) formation of sol emulsion in 2-ethylhexanol-1 containing the surfactant SPAN-80 (EH); (3) gelation of emulsion drops by extraction of water with partially dehydrated EH; (4) impregnation of gel to Li:Ti molar ratio MR = 2; (5) thermal treatment at 1200°C in order to receive chloride free product. This temperature can be significantly lowered (to 750°C) by dechlorination starting solution TiCl₄ by chemical treatment of the with nitric acid to form of nitrate-stabilized titania sols. Tritium release from sol-gel made Li₂TiO₃ microspheres were found very close to that observed for other traditional materials, however for the first sample process starts slightly earlier.     

Temperature measurements by H2-CARS in the reactive zone of a plasma test reactor for hydrocarbon synthesis

The application of coherent anti-Stokes Raman spectroscopy (CARS) to an electric are test reactor is described in which acetylene synthesis in analogy to the large-scale industrial process is .studied. We report on spatially resolved measurements of H₂-CARS spectra, the comparison with calculated spectra, and the determination of temperatures in the reaction zone.Dedicated to Prof. Rudolf Wienecke on the occasion of his 65 birthday.     

~(13)C代谢通量分析

代谢通量分析(metabolic flux analysis,MFA)是通过确定代谢网络中代谢流分布来表征细胞代谢状态的强有力的工具。鉴于计量学代谢通量分析在处理复杂代谢网络时表现出的局限性,发展了以13C标记实验为基础的13C MFA。本文介绍了13C MFA的原理与方法,总结和评述了13C MFA在实验与数据分析方面的最新进展以及MFA在功能基因组研究中的重要地位,同时对代谢通量分析的发展前景进行了展望。     

Use of non-segmented flow,post-columns reaction detection with miniaturized HPLC systems

Summary The use of non-segmented flow, post-column reaction detection is evaluated for use with miniaturized HPLC. Non-segmented open-tubular reactors with internal diameters 0.1 mm to 0.25 mm and packed-bed reactors with internal diameters of 1 mm, filled with 5 and 10 m particles are evaluated theoretically and experimentally with respect to band broadening and pressure drop characteristics. An integrated system consisting of miniaturized HPLC (1 mm i. d.) columns and compatible hardware is described. An example of the separation of catecholamines is given.     

Rapid measurement of fish freshness indices by an amperometric flow-injection system with a 16-way switching valve and immobilized enzyme reactors

A novel flow-injection system is proposed for the rapid measurement of the fish freshness indices K₁ and K₂: K₁=[([HxR+[Hx])×100/([IMP]+[HxR]+[Hx])] and K₂=[[Hx]×100/([HxR]+[Hx])], where [IMP], [HxR] and [Hx] are inosine-5′-monophosphate, inosine and hypoxanthine concentrations, respectively. For the estimation of index K₁, 5′-nucleotidase immobilized reactor and nucleoside phosphorylase (NP)/xanthine oxidase (XO) coimmobilized reactor were incorporated in series in the flow-injection line made up by a 16-way switching valve with two sample loops. For the estimation of index K₂, NP and XO immobilized reactors were also incorporated in the similar flow-line. Two sample portions passed through the flow-line with different residence times so that two peaks were obtained. The first and second peaks obtained in the K₁-determining system corresponded to the total of HxR and Hx and the total of Hx, HxR and IMP, respectively. Similarly, the first and second peaks obtained in the K₂-determining system corresponded to Hx and the total of Hx and HxR, respectively. Therefore, the indices K₁ and K₂ can be estimated by

where i₁ and i₂ present the peak current of the first and second peaks, respectively, and f the ratio of the peak currents of the first and second peaks for a Hx standard solution. A sea bream was selected as a model fish and it was stored at 4 °C after death. A good correlation was found between the index K₁ and the storage time over a period of 400 h, with a correlation coefficient of 0.992, but no correlation between the index K₂ and the storage time. The measurements could be performed at a rate of 22 samples per hour with satisfactory precision (0.6–1.2% R.S.D.), without calibration for each species, accurate weighing of fish meat and any interferences in fish meat.     

Molecular reactors and machines: applications, potential, and limitations

Molecular reactors are miniature vessels for the assembly of reactants at the molecular level, in order to change the nature of chemical transformations. It seems probable that those that will find most immediate applications are those that change product ratios or give products which would not readily form in the absence of the reactors, and thereby afford easy access to materials that are otherwise difficult to obtain. Molecular machines consist of interrelated parts with separate functions and perform some kind of work, at the molecular level. Practical examples are likely to be relatively uncomplicated and not based on individual functions of single-molecule devices. Instead they will probably rely on extensive redundancy of the molecular components and their interactions and reactions, as well as of the machines themselves.     

Composite poly(dimethylsiloxane)/glass microfluidic system with an immobilized enzymatic particle-bed reactor and sequential sample injection for chemiluminescence determinations

A three-layer poly(dimethylsiloxane) (PDMS)/glass microfluidic system for performing on-chip solid-phase enzymatic reaction and chemiluminescence (CL) reaction was used for the determination of glucose as a model analyte. A novel method for the immobilization of controlled-pore-glass based reactive particles on PDMS microreactor beds was developed, producing an on-chip solid-phase reactor that featured large reactive surface and low flow impedance. Efficient mixing of reagent/sample/carrier streams was achieved by incorporating chaotic mixer structures in the microfluidic channels. A conventional sequential injection (SI) system was adapted for direct coupling with the microfluidic system, and combined with hydrostatic delivery of reagents to achieve efficient and reproducible sample introduction at 10 μl levels. A detection limit of 10 μM glucose (3σ), and a precision of 3.1% RSD (n=7, 0.2 mM glucose) were obtained using the SI-microfluidic-CL system integrated with a glucose oxidase (GOD) reactor. Carryover was <5% at a throughput of 20 samples/h.     

故障在线监测自编码式棒位指示系统

提出了一种结构简单、工作可靠、测量精度高的控制棒位置指示系统—故障在线监测自编码式棒位指示系统。该系统探测器由一个励磁线圈、Ｎ个测量线圈、一个补偿线圈和一根芯棒组成。其中，芯棒由Ｍ段导磁材料与Ｍ１段非导磁材料间隔分布构成。当芯棒随控制棒在测量线圈中央轴向运动时，励磁线圈上输入的交变信号必然在测量线圈上产生交变感应信号，通过接收这些测量线圈的输出信号并进行处理从而判断控制棒棒位。本文详细地介绍了该系统工作原理、硬件结构、软件框图及试验。结论表明：它比现役压水堆使用的线圈编码棒位指示系统性能优越并具有更多的功能—故障在线监测功能，它可完全满足供热堆的棒位测量要求并可用于其他水堆的棒位指示。     

催化法在恶臭治理中的应用

介绍了在臭气治理中应用的催化直接燃烧法、催化氧化法、吸咐催化氧化法、光催化氧化法技术的机理，催化剂的选择和常用的催化反应器．提出催化方法存在的问题并对催化方法的应用前景进行了展望．