Microstructure,mechanical properties and wear resistance of an Al–Mg–Si alloy produced by equal channel angular pressing

Microstructure, mechanical properties and wear resistance in an ultrafine-grained Al–Mg–Si alloy fabricated utilizing a combination of equal channel angular pressing (ECAP) and dynamic aging were investigated in this paper. The results indicated that the grain size of the ECAP alloy was significantly refined, i.e., to ~239 nm after three ECAP passes. Meanwhile, the yield and tensile strength of the ECAPed material reached 340 MPa and 445 MPa, respectively, while maintaining a significant uniform elongation of 14%. Wear resistance results demonstrated that the wear rate, wear depth and width of the ECAPed material decreased in comparison with the solution-treated (SST) and peak-aged (T6) conditions under a load range of 5–25 N. The adhesive wear that occurs in the undeformed specimens at 10 N does not appear in the ECAPed specimen at the same load, indicating that the ECAPed specimen delay the appearance of more serious wear mechanisms under certain loads. The cooperative interaction of high density nano-scale β" precipitates and dislocations resulted in a combination of super-high strength and good work hardening ability which suppressed the extension of cracks between the friction layer and the plastic deformation zone. As a consequence, the combination of ECAP and dynamic aging brings a significant improvement for antifriction performance of the 6061 aluminum alloy.     

Heterogeneous photobleaching in confocal microscopy

Photobleaching was studied during recording of confocal scanning laser microscopy. Studies on fluorescent gels of FITC-labeled dextran were used to evaluate differential bleaching along thez-axis. Differential bleaching along the z-axis was observed and it was seen that this was related to the numerical aperture of the objective in use. This points to the conclusion that photon energy flux density is an important parameter in photobleaching. To check if photon energy flux density heterogeneity is affected by local variation in the refractive index of the sample, photobleaching rates were calculated for different fluorescent objects (sections of seeds, animal cells stained with nuclear stains, immunocytochemistry preparations) and a pronounced similarity was found between photobleaching rates and DIC images.     

几率量子隐形传态的离子阱方案

本文提出了一个在分别囚禁于不同离子阱中的两个离子间实现几率量子隐形传态的简单方案,Alice对离子1和离子2的内态进行联合测量并通过经典通道告诉Bob测量结果,Bob利用一束经典驻波场激光与离子3相互作用并控制相互作用的时间就能够在离子3上最佳几率地重现离子1的初始内态.     

Numerical analysis of turbulent structure in compound meandering open channel by algebraic Reynolds stress model

The turbulent flow in a compound meandering channel with a rectangular cross section is one of the most complicated turbulent flows, because the flow behaviour is influenced by several kinds of forces, including centrifugal forces, pressure‐driven forces and shear stresses generated by momentum transfer between the main channel and the flood plain. Numerical analysis has been performed for the fully developed turbulent flow in a compound meandering open‐channel flow using an algebraic Reynolds stress model. The boundary‐fitted coordinate system is introduced as a method for coordinate transformation in order to set the boundary conditions along the complicated shape of the meandering open channel. The turbulence model consists of transport equations for turbulent energy and dissipation, in conjunction with an algebraic stress model based on the Reynolds stress transport equations. With reference to the pressure–strain term, we have made use of a modified pressure–strain term. The boundary condition of the fluctuating vertical velocity is set to zero not only for the free surface, but also for computational grid points next to the free surface, because experimental results have shown that the fluctuating vertical velocity approaches zero near the free surface. In order to examine the validity of the present numerical method and the turbulent model, the calculated results are compared with experimental data measured by laser Doppler anemometer. In addition, the compound meandering open channel is clarified somewhat based on the calculated results. As a result of the analysis, the present algebraic Reynolds stress model is shown to be able to reasonably predict the turbulent flow in a compound meandering open channel. Copyright © 2005 John Wiley & Sons, Ltd.     

强流束晕-混沌的外部磁场开关控制

研究了强流离子束在周期聚焦磁场通道中束晕-混沌的外部磁场开关参数控制方法. 将该方法应用在多粒子模型中，实现了对5种不同初始分布质子束的束晕-混沌的有效控制，得到了消除束晕及其再生现象的理想结果.在强流加速器系统中，由于外部磁场是可测和可调 的物理量，因此该控制方法有利于实验研究，可为强流质子加速器中周期聚焦磁场的设计和实验提供参考. 关键词： 强流离子束 周期聚焦磁场通道 束晕_混沌 混沌控制 开 关控制     

Phase Conjugation in Saturable Absorbing Dye Films by Degenerate Four-Wave Mixing and Holographic Processes Using Nanosecond Pulse and CW Lasers

We report on the simultaneous generation of phase-conjugate signals by degenerate four-wave mixing (DFWM) and holographic processes using a nanosecond pulse and a CW lasers in polyvinyl alcohol (PVA) films doped with four kinds of saturable absorbing dyes. For the pulse laser, of the four kinds of dye-doped PVA films, the erythrosine B-doped PVA and uranine doped-PVA films generate PC signals only by the DFWM process, while the other dye-doped PVA films generate PC signals simultaneously by not only the DFWM process but also the holographic process. Especially, the safranin T-doped PVA film generates strong PC signals by the holographic process. In contrast, all of the dye-doped PVA films generate the two types of PC signals for the CW laser. The fading of dye molecules is found to result in the generation of the holographic component of PC signals which governs the temporal behavior of the total PC signals.     

电视接收机图像中频的探讨

依据电视接收机图像中频选择原则，论述了我国电视接收机两次改变图像中的必要性。     

原子的吸收光谱和发射光谱的演示

介绍了利用光学多道分析仪和投影仪在课堂上实时演示原子的吸收光谱和发射光谱的实验方法。     

蒙版浅议

介绍了蒙版在图像处理中的应用，详细阐述了快速蒙版、Alpha通道蒙版、图层蒙版的特点及示例操作。