Evolution of ferronickel particles during the reduction of low-grade saprolitic laterite nickel ore by coal in the temperature range of 900–1250℃with the addition of CaO–CaF2–H3BO3

The method of producing ferronickel at low temperature(1250–1400℃)has been applied since the 1950s at Nippon Yakin Kogyo,Oheyama Works,Japan.Limestone was used as an additive to adjust the slag composition for lowering the slag melting point.The ferronickel product was recovered by means of a magnetic separator from semi-molten slag and metal after water quenching.To increase the efficiency of magnetic separation,a large particle size of ferronickel is desired.Therefore,in this study,the influences of CaO,CaF₂,and H₃BO₃ additives on the evolution of ferronickel particle at≤1250℃were investigated.The experiments were conducted at 900–1250℃with the addition of CaO,CaF₂,and H₃BO₃.The reduction processes were carried out in a horizontal tube furnace for 2 h under argon atmosphere.At 1250℃,with the CaO addition of 10 wt%of the ore weight,ferronickel particles with size of 20μm were obtained.The ferronickel particle size increased to 165μm by adding 10 wt%CaO and 10 wt%CaF₂.The addition of boric acid further increased the ferronickel particle size to 376μm,as shown by the experiments with the addition of 10 wt%CaO,10 wt%CaF₂,and 10 wt%H₃BO₃.     

大尺寸工程模型试验中的相似材料配比试验研究

大型物理模型试验是研究复杂工程问题的重要方法，如何快速、准确地确定相似材料配比是试验中至关重要的一环.为降低试验成本、简化试验步骤、充分调用原料性能，采用河砂、水泥和石膏这三种最普通的原料，以骨胶比(河砂与水泥石膏的质量比)和水膏比(水泥与石膏的质量比)为变量，进行了45组对比试验，对相似材料的物理及动、静力学参数进行了研究.获得了以河砂、水泥和石膏为原料配制的相似材料各物理量的变化区间；探讨了骨胶比和水膏比对相似材料各物理量的控制作用，并对比了其敏感性；基于多元线性回归分析建立了各因素与物理量间的定量关系，得到的拟合公式能较好地描述相似材料的性质.     

生料配料系统的回归-校正控制方法研究

针对通常生料配料系统所出现的问题,提出了对生料配料过程进行多目标综合控制的基本思想,在这一基础上,给出了控制生料饱和参数、生料成分的系统控制结构,并着重论述了饱和系数回归分析与回归控制及成分校正控制的原理、模型与方法。     

合理预留安全矿柱的探讨

矿床地下开采时,在没有其他安全措施的情况下,不得不采用预留安全矿柱的方法,以保护地面建筑物、构筑物和主要井巷免受因地下采矿而引起的破坏。但这会导致矿量的损失,故需要寻找合理预留安全矿柱的方法。作者用解析的方法对预留安全矿柱进行研究,突破了常用的传统方法。     

泛连通图定理和Ore2条件

记Ore2=min{d(y) d(x)|x,y∈V(G),d(x,y)=2}，本得到：若n阶图G的Ore2≥n 1，则G是[5;n]泛连通图。此是比Faudree等人的定理进一步的结果。     

四阶段三层次洗毛机理的研究

根据国产原毛表面各种污染物的特点、分布状态及其去除过程，提出了原毛表面污染物去除过程的四个阶段：润湿阶段、溶胀阶段、快速去污阶段和慢速去污阶段；原毛表面污染物可分为附着层、混凝层和结合层。各层污染物在纤维表面附着状态不同、结合形式不同，因而各污染物洗涤难易程度和去除机理各不相同．结合层污染物较难去除，洗涤时针对结合层污染物特点需采用特殊工艺。     

Characterisation of raw materials for production of ceramics

The aim of this paper is to characterize some raw materials used for ceramics material production. Five samples of clay have been analyzed. It has been carried out a patterned sampling in a quarry in Rosarno (South Italy). Chemical-physical properties on clay samples are determined. Test pieces have been prepared and physical properties after firing are determined by DSC thermal analysis, XRD analysis and X-ray fluorescence. It is important to note the high amount of Fe₂O₃. The mixture principally contains quartz, illite and oligoclase. It has been observed the colour and the shape after firing: predominant colour is red. In this case the clay has been used in mixtures covered with glazes. The colour of internal clay is hidden by opaque of glazes. The analysed raw materials can be used in a slip for single fired red tiles. The A2sp clay produces best ceramics at 1000°C.     

火焰原子吸收法测定铅锌矿中微量镓

将样品中的硫化物用HNO3氧化为硫酸盐后，再用HNO3、HF、H2SO4进一步溶解，在6mol/LHCl介质中用乙酸丁酯萃取镓，水反萃取后，用火焰析子吸收法测定Ga，该法检出限为0．80μg/mL，相对标准偏差为2．1％，用该法测得国家一级标准品的结果均与推荐值相符。     

The effect of ionizing radiation on microbiological decontamination of medical herbs and biologically active compounds

Several thousand tons of medical herbs are produced annually by pharmaceutical industry in Poland. This product should be of highest quality and microbial purity. Recently, chemical methods of decontamination are recognized as less safe, thus irradiation technique was chosen to replace them in use. In the Institute of Nuclear Chemistry and Technology the national program on the application of irradiation to the decontamination of medical herbs is in progress now. The purpose of the program is to elaborate, on the basis of research work, the facility standards and technological instructions indispensable for the practice of radiation technology.     

分光光度计测铁矿石中钛的测量不确定度评定

紫外-可见分光光度计在化学分析中应用较为广泛。对于借助其进行化学分析测量不确定度的评定，目前较多见于溶液测定。实际应用中，测试样品多为固体，涉及到称样、溶解、稀释、定容等步骤。此文试从随机效应和系统效应的角度考虑，对紫外-可见分光光度计应用ISO4691：1985铁矿石中钛含量的测定——二安替比林甲烷分光光度法对铁矿石中钛的测量过程中的不确定度来源进行了较为全面的分析，并最终给出评定结果。