Critical points in the Bragg glass phase of a weakly pinned crystal of Ca3Rh4Sn13

New experimental data are presented on the scan rate dependence of the magnetization hysteresis width ΔM(H) (∞ critical current densityJ _c(H)) in isothermalMH scans in a weakly pinned single crystal of Ca₃Rh₄Sn₁₃, which displays second magnetization peak (SMP) anomaly as distinct from the peak effect (PE). We observe an interesting modulation in the field dependence of a parameter which purports to measure the dynamical annealing of the disordered bundles of vortices injected through the sample edges towards the destined equilibrium vortex state at a givenH. These data, in conjunction with the earlier observations made while studying the thermomagnetic history dependence inJ _c(H) in the tracing of the minor hysteresis loops, imply that the partially disordered state heals towards the more ordered state between the peak field of the SMP anomaly and the onset field of the PE. The vortex phase diagram in the given crystal of Ca₃Rh₄Sn₁₃ has been updated in the context of the notion of the phase coexistence of the ordered and disordered regions between the onset field of the SMP anomaly and the spinodal line located just prior to the irreversibility line. A multi-critical point and a critical point in the (H,T) region of the Bragg glass phase have been marked in this phase diagram and the observed behavior is discussed in the light of recent data on multi-critical point in the vortex phase diagram in a single crystal of Nb.     

一类时变需求且存货影响销售率的EOQ模型

从实际背景出发,在R AM P型需求和存货影响销售率条件下,讨论了一类以缺货开始的变质性物品的EOQ模型.给出了模型的求解方案及单位时间内平均利润最大化的两个充分条件,并用数值算例进行了验证.     

干涉型闭环光纤陀螺实现中关键问题研究

介绍了干涉型光纤陀螺实现中的几个关键问题和相应的解决方法.把光纤陀螺的系统构成细分为前端和后端,关键问题有:1)梳状信号的滤波;2)模拟开关的选取;3)信号采样;4)阶梯波的处理;5)干涉闭环光纤陀螺的软件设计.相应问题细化到运放、模数转换、数模转换等器件的选择,并针对双路调制信号对光纤陀螺的影响和应对措施作了工程性的分析.本文是基于长期的工程实践和深入的理论分析而得到的,具有较强的实践参考意义.运用文章中的方法和经验,实践证明光纤陀螺仪的精度和灵敏度有较大提高.     

斜波压缩下HMX晶体的弹塑性行为

开展了（010）、（011）晶向HMX晶体的斜波压缩实验,获得了约15 GPa压力下的速度响应剖面。实验结果表明,HMX单晶存在明显弹塑性转变行为,且速度波形有下降趋势,这是材料的黏性效应导致,材料的弹性极限随着样品厚度增加而变化,不同晶向的材料动力学特性存在差异。结合Hobenemser-Prager黏弹塑性本构关系和三阶Birch-Murnaghan物态方程开展了HMX晶体斜波压缩物理过程的数值模拟,计算结果可以很好地描述HMX晶体的弹塑性转变这一物理过程。     

鄂尔多斯盆地早奥陶世沉积特征及其演化

鄂尔多斯盆地的早奥陶世沉积可划分为西缘末端变陡的碳酸盐岩缓坡、东缘蒸发-局限台地和南缘镶边碳酸盐岩台地3个沉积区。岩相古地理的发展可划分为3个阶段,即冶理—亮甲山期为稳定的发展阶段,早、晚马家沟期为岩相分异阶段,峰峰期为中奥陶世陆源浊积盆地这一新的发展阶段的前奏。其演化具有东升西降的特点,东部沉积区的沉积相演化为一个向上变浅的沉积序列,而西部为一个向上变深的沉积序列。     

允许两辆车驶入的避险车道设置

针对允许两辆车驶入的避险车道(TER),将先后驶入制动床的两辆车的停驶位置抽象为相互独立事件,建立了两辆车均能成功驶入避险车道的概率模型.基于仿真数据的研究结果表明:主线为直线时两辆车成功驶入避险车道的概率高于主线为平曲线时;即使主线为直线,制动床宽度为车辆宽度的5倍,两辆车均能成功驶入制动床的概率也不超过15%,这说明仅通过拓宽制动床宽度而不设置满足长度要求的引道,仍不能保证第二辆车成功驶入制动床.     

需求率为斜坡型的一类变质性物品最优库存策略

本文在考虑需求率服从斜坡型分布的情况下,研究了允许缺货且缺货完全回补、变质率服从威布尔分布、补货率为无穷、有限计划期内的库存模型,证明了最优补货策略的存在性,并给出了求解最优补货策略的算法.     

Break up of bound-N-spatial-soliton in a ramp waveguide

We present an analytical and numerical investigation of the propagation of spatial solitons in a nonlinear waveguide with ramp linear refractive index profile (ramp waveguide). For the propagation of a single soliton beam in a ramp waveguide, the particle theory shows that the soliton beam follows a parabolic curve in the region where the linear refractive index increases and a straight line outside the waveguide. The acceleration of the soliton depends on the beam intensity: higher amplitude solitons experience higher acceleration. Numerical calculations using an implicit Crank-Nicolson scheme confirm the result of the particle theory. Combining these propagation properties with the theory about bound-N-soliton, we study the break up of such a bound-N-soliton in a ramp waveguide. In a ramp waveguide, a bound-N-soliton will always be splitted intoN independent solitons with the higher amplitude soliton emitted first. The amplitude of the separated solitons after break up are calculated using the soliton theory as if the solitons are independent. Numerical simulations show that the results agree quite well with this theoretical prediction, indicating that the interaction during break up has only little influence. On Leave from Jurusan Matematika, Universitas Brawijaya, Jl. MT Haryono 167 Malang Indonesia.     

斜坡补偿电流模式控制开关变换器的动力学建模与分析

降压型、升压型和升压-降压型DC-DC变换器是应用广泛的基本开关DC-DC变换器.电流模式控制开关DC-DC变换器在较宽的电路参数范围内具有两个边界,基于开关切换前后电感电流的上升和下降斜率,建立了斜坡补偿电流模式控制开关DC-DC变换器的统一模型.该模型进行无量纲归一化处理后只有三个参数,可有效展示开关DC-DC变换器在电感电流连续传导模式(CCM)和电感电流不连续传导模式(DCM)时的动力学特性.利用此模型,导出了轨道状态发生转移时的两个分界线方程,由此确定了开关DC-DC变换器的稳定周期1域、CCM鲁棒混沌域和DCM弱混沌强阵发域三个工作状态区域.开关DC-DC变换器二维参数映射图和电流模式控制降压型DC-DC变换器的电路实验观察验证了由两条分界线划分工作状态域的正确性.