"长三角"城际轨道交通概念规划

介绍了概念规划的概念,阐述了概念规划的特点.概念规划反映的是一种趋势、一种意向,其特征是创意与速度,强调内容简化、重点突出,强调多目标、多方案的比较,强调规划的灵活性,淡化时间期限,注重动态特征.初步探索了概念规划在“长三角”城际轨道交通规划中的运用.     

对超重、失重演示实验的改进

对传统的超重、失重演示实验进行了改进,使弹簧秤的指针能静止在超重(或失重)的位置上,从而能准确地读出读数,提高演示效果.     

改进型钢轨钻孔机的研制及应用

阐述了钢轨钻孔机的现状与改进方案,论述了钢轨钻孔机的研制过程及现场应用,分析了钢轨钻孔机的测试结论,并介绍了改进型钢轨钻孔机。     

Rail vs truck transport of biomass

This study analyzes the economics of transshipping biomass from truck to train in a North American setting. Transshipment will only be economic when the cost per unit distance of a second transportation mode is less than the original mode. There is an optimum number of transshipment terminals which is related to biomass yield. Transshipment incurs incremental fixed costs, and hence there is a minimum shipping distance for rail transport above which lower costs/km offset the incremental fixed costs. For transport by dedicated unit train with an optimum number of terminals, the minimum economic rail shipping distance for straw is 170 km, and for boreal forest harvest residue wood chips is 145 km. The minimum economic shipping distance for straw exceeds the biomass draw distance for economically sized centrally located power plants, and hence the prospects for rail transport are limited to cases in which traffic congestion from truck transport would otherwise preclude project development. Ideally, wood chip transport costs would be lowered by rail transshipment for an economically sized centrally located power plant, but in a specific case in Alberta, Canada, the layout of existing rail lines precludes a centrally located plant supplied by rail, whereas a more versatile road system enables it by truck. Hence for wood chips as well as straw the economic incentive for rail transport to centrally located processing plants is limited. Rail transshipment may still be preferred in cases in which road congestion precludes truck delivery, for example as result of community objections.     

Nonlinear modelling and control of a common rail injection system for diesel engines

Modern trends in designing mechatronic systems call for a synergic design of the separated subsystems (mechanic, electronic parts, control modules, etc.) concurring to the overall performance. Following this point of view, this paper presents a control oriented model and a nonlinear control design for a Common Rail injection system. First a model is developed, which is tuned in a virtual simulation environment, representing the injection system in details in a reliable replication of reality. Then a sliding mode control is developed. Both the model of the injection process and of the control law are validated by a virtual detailed simulation environment. The prediction capability of the model and the control efficiency are clearly shown.     

无缝线路缓冲区病害分析及根治措施

概述了缓冲区养护中存在的问题,分析了无缝线路缓冲区病害的成因,提出了治理病害的针对性措施.     

倾斜导轨上二级倒立摆的控制

本文在已有的倾斜导轨上二级倒立摆数学模型的基础上,采用极点配置方法和线性二次型最优控制器对导轨倾斜45o时的二级倒立摆进行了控制,并用MATLAB进行了控制结果仿真,仿真结果表明,控制效果较好。     

钢轨铝热焊缺陷的研究与防止

对钢轨铝热焊接头的断口进行了实验观察与研究,分析了接头断裂形成的原因,认为焊缝外观缺陷与内部微裂纹是导致接头短期服役断裂的主要原因,并在此基础上提出了相应的防止措施.     

接触网交叉式线岔平面布置

分析了各类交叉式线岔平面布置的特点,论述了交叉式线岔平面布置的基本原则及其应用。     

考虑声源非相干性的城市轨道交通全封闭声屏障降噪预测

以某轨道交通全封闭声屏障为研究对象,考虑简化线声源的非相干性,建立2.5维边界元衍射声场模型;通过现场沿线环境噪声测试,验证了该模型的准确性,并与相干源衍射声场预测结果比较;最后预测了在近场高层建筑附近,全封闭声屏障对近轨或远轨车辆噪声的降噪效果。研究结果表明,非相干线声源更符合城市轨道交通噪声源特性;对于轮轨噪声（315～1 000 Hz）,全封闭声屏障在高层住宅建筑区域有显著的降噪效果,1/3倍频程插入损失最大为30.0 dB。对于低频噪声（50～250 Hz）,全封闭声屏障会加重高层住宅建筑区域的声压级,使插入损失出现负值。针对高层建筑附近场点,全封闭声屏障的顶端拱形透光板对远轨车辆噪声有更为显著的附加降噪效果,大部分场点附加插入损失均高于5.0 dB。