核动力装置模拟器就地系统中双机通讯的实现

利用微机软仿真实现模拟器就地系统中仪表的动态实时显示和开关的实时控制，可以节省的大量外部设备，提高系统可扩充性。本文介绍了该技术实现的方法，即服务器与客户机之间数据双向通讯的实现途径。经实践验证，本文的方法是正确、可行的。     

An improved numerical simulator for multiphase flow in porous media

In basin modelling the thermodynamics of a multicomponent multiphase fluid flux are computationally too expensive when derived from an equation of state and the Gibbs equality constraints. In this article we present a novel implicit molar mass formulation technique using binary mixture thermodynamics. The two proposed solution methods, with and without cross derivative terms between components, are based on a preconditioned Newton‐GMRES scheme for each time‐step with analytical computation of the derivatives. These new algorithms reduce significantly the numerical effort for the computation of the molar masses, and we illustrate the behavior of these methods with numerical computations. Copyright © 2004 John Wiley & Sons Ltd.     

激光相位成像雷达的研究

利用无合作目标漫反射激光相位测距的原理,对关键单元技术进行分析和设计,研制成一种用于自主式车辆视觉导引的激光相位成像雷达的原理样机.     

用Josephson结电子模拟器测量磁通量子2e/h

介绍用Josephson结电子模拟器在政党温度下，模拟测量磁通量子2e/h，用模拟器来研究Josephosn结的特性。该实验可作为普通物理实验中课题设计实验的一个内容。     

Electrical detection of nuclear spin echoes

We show, via a straightforward calculation, that it is feasible to detect nuclear spin echoes in a ferromagnetic thin film by electrical means. The detection scheme is based on the deflection of the electronic magnetization when the nuclear magnetization reforms during an echo. This deflection is observed as a time-dependent magnetoresistive signal.     

Dynamics of Single-Pulse Echo Signals under the Conditions of Zeeman Switching

The signals of a single-pulse echo (SE) generated on nonresonant excitation of an inhomogeneously broadened two-level system by a radio-frequency pulse (RFP), against the background of which a magnetic video pulse (MVP) of certain length has been switched on, have been described analytically. It is established that under the conditions of such excitation several SE signals are formed whose generation moments are determined by the duration and amplitudes of the RFP and MVP. The amplitudes of some of these signals depend on the Rabi frequency according to a quadratic law, and the amplitudes of others depend on this frequency according to a biquadratic law. It has been established that the mechanism underlying the appearance of these signals is associated with zero beats arising as a result of superposition of the magnetization fluctuations at variable frequencies and at a frequency of detuning from resonance. It is shown that in the limiting case, where the RFP duration considerably exceeds the duration of the MVP or is comparable with it, the number of SE signals decreases to two. Theoretical results on the formation of SE and the dependence of the amplitude of these signals on the MVP amplitude agree with the experimental data on NMR pulsed signals in ferromagnetic materials.     

单涂层吸波材料的优化设计及偏差研究

本文通过对单涂层吸波材料内电磁波传输损耗机理的细致研究，提出了单涂层吸波材料优化设计的两项原则。结合具体实例详细说明这两项原则的具体应用，最后讨论涂层电磁参量在偏离匹配条件的情况下，对涂层吸波性能影响的具体结果分析。图３．表１，参３。     

红外耦合光学系统设计

红外目标模拟器由红外目标图像发生器和投影光学系统组成。该红外光学系统是一个要求与2个导引光学系统的光学技术参数相匹配的长焦距、大视场和具有像方远心光路的中红外光学系统。叙述用于红外目标模拟器的红外耦合光学系统的设计原理，提出它与导引光学系统一起可组成放大倍率M=4.5×的红外投影光学系统，并指出IR CRT产生的图像通过红外投影光学系统可成像在导引接收器上。针对给出的红外耦合光学系统的设计特点和技术要求，光学材料选取硅（Si） 锗（Ge） 硅（Si），采用简单的柯克三片式结构完成光学系统设计。设计评价结果表明，该系统的光学性能和成像质量均满足设计指标要求。     

四阶累积量的MUSIC算法在海流测向中的应用

针对高频地波雷达系统OSMAR2000海流测向中海流元数不易估计的问题，利用四阶谱累积量MUSIC算法的空间谱结构特点，采用试探法确定信号源数并估计信号源的位置．通过对模拟海流和实测数据的处理实验表明，利用该算法可以较准确地估计出海流元的个数和方位，并且比传统MUSIC方法获得更小的角度估计方差，有效地反演了海洋表面流信息．     

Courants caractéristiques et analyse de SEREigen currents and RCS analysis

In this Note, we return to the theory of characteristic modes which was introduced 30 years ago for electromagnetic scattering problems. A simple mathematical framework is proposed and complete definitions are given. The potential interest of this theory in terms of Radar Cross Section (RCS) analysis is then discussed, especially in the low frequency case. Finally, a 3-D example is presented to illustrate the efficiency of this decomposition. To cite this article: Y. Morel et al., C. R. Mecanique 332 (2004).