Azobenzene‐Functionalized Cage Silsesquioxanes as Inorganic–Organic Hybrid,Photoresponsive, Nanoscale,Building Blocks

Mono‐ and octa‐azobenzene‐functionalized cage silsesquioxanes were easily synthesized by the reaction of 4‐bromoazobenzene with monovinyl‐substituted octasilsesquioxane and cubic octavinylsilsesquioxane through the Heck coupling reaction. Excited‐state energies obtained from time‐dependent density functional theory (TDDFT) and the CAM‐B3LYP functional correlate very well with experimental trans–cis photoisomerization results from UV/Vis spectroscopy. These azobenzene‐functionalized cages exhibit good thermal stability and are fluorescent with maximum emission at approximately 400 nm, making them potential materials for blue‐light emission.     

光引发丙烯酰胺沉淀聚合研究

以丙酮/水为溶剂，采用紫外光（UV）引发丙烯酰胺（AM）沉淀聚合，考察了聚合反应的特征以及溶剂、初始单体浓度、引发剂浓度、表面入射光强、液层厚度等参数对聚合物分子量的影响。结果表明，紫外光引发丙烯酰胺沉淀聚合过程中单体转化率和聚合物分子量都随反应时间的延长而增加，光照80min时，单体转化率可达90％以上。所得聚合物分子量为10⁵～10⁶，提高单体浓度可使聚合物分子量增加，增加引发剂浓度和提高光强导致聚合物分子量降低，液层厚度对聚合物的分子量影响不大。所得聚合物粒子粒径约为200～300nm左右，粒径分布较为均匀，溶剂组成对聚合物粒子相貌影响较大，增加水含量可使粒子粒经变大但分散性变差。     

Rhythmic pattern formations in gels and Matalon—Packter law: A fresh perspective

The periodic precipitation pattern formation in gelatinous media is interpreted as a moving boundary problem. The time law, spacing law and width law are revisited on the basis of the new scenario. The explicit dependence of the geometric structure on the initial concentrations of the reactants is derived. Matalon—Packter law, which relates the spacing coefficient with the initial concentrations is reformulated removing many ambiguities and impractical parameters. Experimental results are discussed to establish the significance of moving boundary concept in the diffusion controlled pattern forming systems     

建筑外环境的人性化设计

通过研究和分析人的行为模式与环境的互动关系,了解人们的行为倾向与需求,得出相关的环境设计准则供城市空间的创设者作参考,期望能为人们提供更多舒适自然、可亲可近的人性场所。     

表面活性剂对均相沉淀法制备单晶Ce2O(CO3)2￠H2O微粉形貌及 形成机理的影响

在尿素及硝酸铈的混合溶液中分别加入表面活性剂CTAB、 PEG19000、OP-10,利用均相沉淀法合成了不同形貌的CeO2超细前驱体Ce2O(COa)2·H2O,采用X射线衍射及透射电子显微镜等测试手段,对产品的物相和形貌进行了表征．实验结果表明,所得产品均为斜方晶系的单晶Ce2O(CO3)2·H2O,且表面活性剂的加入使晶体的晶化程度明显提高;添加不同的表面活性剂得到不同形貌尺寸的产物: 阳离子型表面活性剂CTAB对Ce2O(CO3)2·H2O晶体的形貌影响不大,所得产物尺寸变小,且分散性得到一定的改善;非离子型表面活性剂对所得产物的形貌影响显著．加入PEG19000和OP-10分别得到了形状排列有序的、尺寸较均匀的、较规则无团聚的微米棒及具有紧密结合中心的发散状的花样微粒．不同形貌前驱体的形成与晶粒形成生长机理的改变有关．     

纳米氧化锌粉的表面改性研究

以Zn(NO3)2·6H2O和CO(NH2)2为原料,采用均相沉淀法制备纳米氧化锌粉.用扫描电镜对产物粒度大小、形貌进行观察,并对其影响因素进行了探讨.结果表明,在反应温度为120℃,反应时间为2.5h时,所制的纳米氧化锌的产率最大.用不同的表面改性剂对纳米ZnO进行表面改性,粉体不再发生团聚.图6,表7,参5.     

泡沫分离,带溶剂萃取和沉淀法提取庆大霉素

研究了用文题法从水相中分离砂大霉素的各种操作因素对分离过程的影响。在最适条件下，种方法对庆大霉素配制液的收率分别为７２％，８８％，８７％，无机盐能使沉淀收率提高。将上述３法用于发酵液时，泡沫法和萃取法的收率均有显著降低，而沉淀法依然能达到很高的收率，ψ＝捍沉淀率约为１００％．     

Melting behaviors,crystallization kinetics,and spherulitic morphologies of poly(butylene succinate) and its copolyester modified with rosin maleopimaric acid anhydride

This article investigated the melting behaviors, crystallization kinetics, and spherulitic morphologies of poly(butylene succinate) (PBS) and its copolyester (PBSR) modified with rosin maleopimaric acid anhydride, using wide‐angle X‐ray diffraction, differential scanning calorimeter (DSC), and polarized optical microscope. Subsequent DSC scans of isothermally crystallized PBS and PBSR exhibited two melting endotherms, respectively, which was due to the melt‐recrystallization process occurring during the DSC scans. The equilibrium melting point of PBSR (125.9 °C) was lower than that of PBS (139 °C). The commonly used Avrami equation was used to describe the isothermal crystallization kinetics. For nonisothermal crystallization studies, the model combining Avrami equation and Ozawa equation was employed. The result showed a consistent trend in the crystallization process. The crystallization rate was decreased, the perfection of crystals was decreased, the recrystallization was reduced, and the spherulitic morphologies were changed when the huge hydrogenated phenanthrene ring was added into the chain of PBS. The activation energy (ΔE) for the isothermal crystallization process determined by Arrhenius method was 255.9 kJ/mol for PBS and 345.7 kJ/mol for PBSR. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 900–913, 2006     

从芒果皮中提取果胶的工艺研究

果胶是一种大分子多糖类物质 ,具有良好的胶凝作用 ,用途广泛 ,在国内外市场上的销量很好。 1 990年世界上果胶总产量约 2 5 0 0 0吨 ,而我国 1 990年仅在食品工业上消耗的果胶就达 1 0 0 0吨 ,但国内市场上销售的果胶大部分为进口货[1] 。果胶在我国的生产仍处于开发阶段 ,所以发掘新的提取资源、提高果胶质量、降低果胶生产成本的意义十分重大。目前 ,已有以柑桔皮、向日葵盘、苹果皮、香蕉皮、马铃薯渣为原料提取果胶的研究报道 ,如何从芒果皮中提取果胶却未见报道。芒果在制造罐头和饮料中副产大量下脚料———芒果皮 ,未能得到充分利用…     

Indirect automatic atomic absorption determination of sulphate based on its precipitation with barium

A continuous precipitation flame atomization atomic absorption spectrometric method for the indirect determination of sulphate is proposed. By using a reversed flow-injection configuration for precipitation as barium sulphate, this anion was determined in the range 10–150 g/ml, with a relative standard deviation of 2.6%. The sensitivity was increased by a factor of seven by using a nitrous oxide-acetylene flame to measure barium.