连续刚构铁路桥收缩徐变效应监测与分析

对连续刚构铁路桥箱梁温度场及桥梁线形进行长期、连续监测,通过主梁跨中下挠的理论与实测对比揭示了连续刚构铁路桥收缩徐变效应。对比了国内外常用收缩徐变估算模型,选择CEB-FIP徐变模型对黄河特大连续刚构桥进行了有限元分析。采用实测温度数据,以箱梁内测温度、外侧温度、顶底板温度梯度、左右侧温度梯度作为箱梁温度场的评判指标,对箱梁1年内的四季温度场分布进行分析。在基于相同温度场的条件下,通过理论值与实测值对比,发现分析成果与实测结果较吻合,说明混凝土的收缩徐变是引起连续刚构铁路桥跨中下挠的主要原因,对比结果还说明通过改善箱梁顶底板应力差能够改善收缩徐变长期效应。     

Viscoelastic properties of amorphous polymers 3: low molecular weight poly(methylphenylsiloxane)

By making creep and recoverable creep measurements of a nearly monodisperse low molecular weight poly(methyl phenyl siloxane) sample, we have found on decreasing temperature towardsT _g that there is continuously a change in the viscoelastic spectrum concomitant with a decrease of the steadystate recoverable compliance. This behavior is exactly the same as previously observed in low molecular weight poly(styrene), proving that this spectacular anomaly in the viscoelasticity of low molecular weight polymers is general and deserves an explanation. Photon correlation spectroscopic measurements performed on the same sample have extended the observation of the viscoelastic response to shorter times and the result corroborates the trend of variation established by the creep data.Dedicated to Prof.Dr. E. W. Fischer on his 65th Birthday. Prof.Dr. Fischer is known for his valuable contribution to fosterine, international collaboration of research in polymer science. This work is an example of his contribution because it would not be possible without him bringing us together. One of us (KLN) would like to take this opportunity to thank Prof. Dr. Fischer for his unwaiving support of the 1st (Crete) and the 2nd (Alicante) International Discussion Meeting on Relaxations in Complex Systems     

Instability in a delay-PDE model of earthquake occurrence

Summary Ductile deformation prior to brittle fracture in rocks causes fracture to take place with a time delay after the critical stress for fracture is reached, in the presence of an increasing load stress. We discuss the stability of a stochastic model of interactive earthquake occurrence under the influence of time delays resulting from the ductile process. A threshold for oscillatory behavior is found for large enough coupling and discrete time delays. The system is stable if the time delays are spread over a broad time interval, even for large coupling.     

Development of the mechanics of underground and special structures in Kazakhstan over the last 40 years

Some results on underground structures obtained by Kazakh mechanicians are reviewed. The review covers a period of the last forty years. Also results on the mechanics of special objects are discussed.Translated from Prikladnaya Mekhanika, Vol. 40, No. 10, pp. 3–36, October 2004.     

Numerical Prediction of the Strain State of Thermoset Matrix/Mineral Filler Composite Plates

The numerical prediction of the fields of inelastic strains (the linear invariant of the tensor of inelastic strains) in thermoset polyester/marble filler composite plates is discussed. A uniformly distributed load is applied to the plates, which lie on a steel base. The strain fields are predicted by means of the boundary element method by using creep test data for the composites and the polyester matrix itself. Identical creep tests were performed for two ages of the materials (1 month and 13 years), which allowed evaluating the aging effect. The study is carried out in two stages. At the first stage, the application of the generalized Maxwell-Gurevich equation to the thermoset matrix/mineral filler composite is demonstrated. The model parameters determined from the experimental creep data is used for the second stage, where the state of inelastic strains in the plates is predicted by applying the boundary element method. The influence of composite formulation (filler content) and physical aging of the polyester matrix on the state of inelastic strains in the plates is shown.__________Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 41, No. 2, pp. 145–156, March–April, 2005.     

Effects of Moisture and Stresses on the Structure and Properties of Polyester Resin

The results of a complex study of structural changes in a cured Norpol 440 polyester resin under the action of damp environment and mechanical loading are presented. A considerable effect of absorbed moisture on the structure and some characteristics of the material is revealed by using thermophysical methods and X-ray diffractometry. The joint effect of moisture and mechanical stress is estimated by investigating the creep in stationary and nonstationary moisture conditions. The anisotropy of the material structure formed during creep is evaluated from the results of dilatometric measurements. It is found that the degree of anisotropy of the material after creep accompanied by moisture sorption is higher than that after creep in the conditions of moisture equilibrium with atmosphere. It is established that the aftercure and relaxation of the residual creep deformation come to an end at heating to 80-85°C. At a further rise in temperature and repeated heating, changes in the material structure are not observed.     

炼镁还原罐材质的成份设计

本文针对炼镁还原罐在使用条件下的破坏形式及对该材质的成份设计进行了分析 ,还原罐材质在具有单一奥氏体的基础上 ,进行良好的合金化处理是提高其抗蠕变性和热强性的有效方法 ,对提高材质的使用寿命起到良好的作用。     

蠕动式步行机器人研究

提出了一种可在复杂地面环境下行走的需蠕动式步行机器人本体结构。该结构采用一种地面被动态适应技术，使得腿部可根据地面情况自动调整伸缩长度，以获得较为稳定的支撑。机器人依靠本体变形及被动适应地面的方法产生步行，在很大程度上简化了步行过程中复杂的动作协调控制问题。根据机器人的结构特点，给出了两种步态规划方式。仿真试验表明，该机器人控制简单，运动灵活，具有较广的应用前景。     

Long-Term Changes in a Heat Exchanger Steel

The steel ASTM A213 P22 is used for superheater outlet header in power plants. During duty cycles lasting over tens of years the temperature is of the order of 545°C and the pressure 125 atm. The microscopic changes in these steels are hard to analyze under working conditions, but they are believed to be responsible for the appearance of creeps in such devices. Investigation of the microscopic modifications will help to predict future failures due to creeps, increasing the reliability and saving a lot of money.We report the investigation of such changes in ASTM A213 P22 steel in use for 30 years as a Superheater header at Haifa power station. The analysis has been carried out using Mössbauer Spectroscopy, X-ray diffraction and optical microscopy. As a result it seems that the morphology and phase change of the carbide phases M₃C/M₇C₃ and M₂₃C₆ are the most prominent changes leading to the material failures.