用标准件对梯度磁场定标

就标准厚度卡片在霍尔传感器的定标方面的应用作了有益的探讨。在纵向测量微小长度时,霍尔片处于磁场边缘位置,其对磁场的梯度更大,即灵敏度更高,且靠中心位置的线性更好。     

Synthesis,Electronic Properties and WOLED Devices of Planar Phosphorus‐Containing Polycyclic Aromatic Hydrocarbons

We describe the synthesis and the physical properties of polyaromatic hydrocarbons (PAHs) containing a phosphorus atom at the edge. In particular, the impact of the successive addition of aromatic rings on the electronic properties was investigated by experimental (UV/Vis absorption, fluorescence, cyclic voltammetry) and theoretical studies (DFT). The physical properties recorded in solution and in the solid state showed that the P‐containing PAHs exhibit properties expected for an emitter in white organic light‐emitting diodes (WOLEDs).     

井下抽油泵柱塞与泵筒运动规律的研究

用三元振动模型,综合考虑油柱、抽油杆柱和油管柱的振动.建立起数学模型并离散化,然后用微机编程求解微分方程组.对不同工况下的抽油泵运动规律和抽油机示功图进行分析研究,得出了油管应予锚定的结论,并给出了不同抽油机的适用范围.为进一步研究抽油泵的井下工作机理和故障原因打下了基础.     

数据域与微机应用系统

本文着重描述在数据转换过程中如何把数据信息按区域进行细分，以弄清数据信息的性质，进而确定一个最优数据通路，建立高效应用系统。     

输液卡临床应用存在的医疗纠纷隐患及对策

目的提高对输液卡的重要性认识，准确、客观及时地书写输液卡，减少因书写不当造成的医疗纠纷。方法通过对2006年8月至10月本院各科2568份输液卡记录存在的缺陷及潜在的医疗纠纷隐患进行分析，并提出相应的对策。结果输液卡记录存在记录输液滴速与实际滴数有误差，药物输入顺序不正确，未按时巡视，记录内容涂改、漏签名、签名难以辨认，记录漏记、错记或记录不全等问题。结论提高护理人员的法律意识，统一规范输液卡，建立输液观察记录卡，加强输液卡回收保存和管理是防范医疗纠纷的保证。     

A/D转换技术及其发展

为了适应A/D转换发展的要求,A/D转换技术也变得越来越复杂。就A/D转换这一领域所应用的主要转换技术以及各自的特点做一简要的介绍,并由此推断出A/D转换技术的发展趋势。     

基于C/S结构的多商户餐饮管理系统

餐饮企业的规模不断的扩大,加盟、连锁和摊位出租方式出现在越来越多的餐饮企业中,及时掌握些加盟店或者出租摊位的销售情况对管理者越来越重要.基于C/S结构的多商户餐饮管理系统就是通过先进的IC卡电子钱包(E-wallet-System)结算方式对该类餐饮企业进行管理,设计出从收款、消费到结算、统计、管理等全部电子化的解决方案并实施.     

The effect of micro-morphology of Bi2O3 on catalytic properties of Co/Bi catalyst for wet air oxidation of acetic acid

The novel phase transfer catalysts S-8 [4-(dimethyloctylammonium) propansultan] and DB-X [1,4-bis(triethylmethylammonium)benzene dibromide] were synthesized and employed for high conversion synthesis of dichlorocyclopropane from various olefins.This revised version was published online in December 2005 with corrections to the Cover Date.     

Dark cure studies of cationic photopolymerizations of epoxides: Characterization of kinetic rate constants at high conversions

The effective propagation rate constant (k_p; averaged over all the propagating active centers) was characterized for solvent‐free cationic photopolymerizations of phenyl glycidyl ether over the entire range of conversions, including the high conversion regime in which mass transfer limitations become important. The profile for the k_p as a function of conversion was found to exhibit a constant plateau value at low to intermediate conversions, followed by a monotonic increase above a threshold value of conversion. To explain this trend, it is proposed that at high conversion the diffusional mobility of the photoinitiator counterion is reduced whereas the mobility of the cationic active center remains high because of reactive diffusion. Therefore, with increasing conversion, the average distance between the active centers and counterions may increase, resulting in an increase in the propagation rate constant. The profiles for the k_p values were investigated as a function of the temperature, photoinitiator anion, and photoinitiator concentration. As the photoinitiator concentration was increased, the plateau value of the effective propagation rate constant decreased whereas the threshold conversion increased. All of the experimental trends are consistent with the proposed increase in ion separation at high conversions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4409–4416, 2004     

基于PC的电机云母槽自动下刻机测控系统的设计

采用工业用计算机实现自动下刻电机云母槽测控系统的设计方法.在加工工艺允许的情况下,系统采用接触式的检测方法能降低成本,提高可靠性,并提高其自动化的水平.在软件设计上,系统由找槽控制算法和下刻深度算法双闭环控制组成,槽控制算法与下刻深度算法之间相互切换直到加工完电机的所有槽.