用标准件对梯度磁场定标

就标准厚度卡片在霍尔传感器的定标方面的应用作了有益的探讨。在纵向测量微小长度时,霍尔片处于磁场边缘位置,其对磁场的梯度更大,即灵敏度更高,且靠中心位置的线性更好。     

基于DIS数字信息化系统对透光物质透光性能的研究

采用DIS数字信息化系统,对不同浓度的蓝墨水溶液在激光光源照射下的透射平均照度及照度分布图像进行实验研究,得到了平均照度值随溶液浓度变化的规律。对不同颜色塑料膜片对白炽灯光源透过照度值及照度分布图像进行实验研究得到及其相关之规律。     

中线在不对称负载作Y连接时的作用

通过实验分析和理论计算,从两个方面说明中线在不对称负载作星形连接时的作用.     

图像相关方法中采用多种子区进行位移测量

在图像相关位移测量方法中一般采用正方型子区搜索中心点的位移.当测量靠近裂纹或缺陷部位的位移时中心型子区失去效果,为了解决这一问题提出了非中心型子区的方法.证明了方法的有效性.认为在相关搜索时测量点既可选定在子区的中心位置,也可选定在非中心位置.进而提出了将测量点确定在子区角点的多种子区的方法.除通常的中心型子区外,至少还有4种子区可以采用,分别是右下角型、左下角型、右上角型和左上角型,这4种子区不但适用于表面裂纹或缺陷部位的位移测量,而且增加了图像有效信息的提取面积.     

用增量有限元法计算金属流动

利用增量有限元理论 ,对金属材料的变形过程进行模拟。为了模拟工程中塑性变形较大的构件的变形规律 ,在每个加载步迭代完成后自动实现坐标更新。     

Stress-Strain State in the Zone of Load Transfer in a Composite Specimen under Uniaxial Tension

The stress-strain state in the zone of load transfer in a uniaxially stretched specimen made of a unidirectional epoxy carbon-fiber-reinforced plastic (CFRP) is investigated. A parametric analysis of the influence of geometric and mechanical characteristics of the specimen on its stress-strain state is performed by means of finite-element modeling. The parameters allowing us to significantly reduce the dangerous concentration of transverse and tangential stresses are revealed. The mechanical tensile characteristics of a high-strength pultruded unidirectional CFRP are determined experimentally, and the size effect of its strength is estimated.     

Analysis of a 2D “liquid”plasma lattice

Adustyplasmacanbedefinedasacomplicatedplasmacontainingsmallsolidmattercalleddustgrainsordustparticles,whichareusuallychargednegatively,duetoelectronshighermobilitythanion,bycollectingelectronsandionsfromthebackgroundplasma.Theuniverseisfilledwithdustyplasmassuchasplanetaryrings,comettails,andnebulae.Also,inindustrialplasmaprocessing,particulatessuspendedinplasmaarethemajorcontaminationinsemiconductormanufacture.Studiesondustyplasmahavebeenextendedtofar-flungtopicssuchaswaves,instabilities,stro…     

路径对摩擦力做功的影响

本文通过讨论两种临界情况下摩擦力所做的功的变化情况，进一步阐明非保守力做的功与路径有关．     

Diffusion in poro‐plastic media

A model is developed for the flow of a slightly compressible fluid through a saturated inelastic porous medium. The initial‐boundary‐value problem is a system that consists of the diffusion equation for the fluid coupled to the momentum equation for the porous solid together with a constitutive law which includes a possibly hysteretic relation of elasto‐visco‐plastic type. The variational form of this problem in Hilbert space is a non‐linear evolution equation for which the existence and uniqueness of a global strong solution is proved by means of monotonicity methods. Various degenerate situations are permitted, such as incompressible fluid, negligible porosity, or a quasi‐static momentum equation. The essential sufficient conditions for the well‐posedness of the system consist of an ellipticity condition on the term for diffusion of fluid and either a viscous or a hardening assumption in the constitutive relation for the porous solid. Copyright © 2004 John Wiley & Sons, Ltd.     

呼和浩特地膜栽培番茄的细菌病害

查明危害呼和浩特地区地膜栽培中番茄的两种病害;番茄角斑病(Pseudomonas corrugota)和番茄溃疡病(Corynebocterium michigamens pv.michigganense)(Smith)Jensen.).国内文献没有见到对前者病害症状的描述.本文所提供的症状可用于诊断这两种细菌病害.