X-ray radiography of aluminum cathodes eroded in high-current vacuum arcs

The aim of the study presented in this paper was to characterize quantitatively the erosion of aluminum cathodes in high-current vacuum arcs. The experimental setup comprised two current generators. The first one, capable of generating a current of amplitude up to 350 kA, was used to produce a plasma jet, that is, the object to be investigated. The second generator was used to produce a source of probe radiation for imaging the object under investigation in soft x rays of energy ?ν ≈ 0.5–3 keV. The findings of the study are based on experimental data obtained by electrophysical and radiographic methods. It has been shown that the cathode erosion rate in a high-current vacuum arc is a function of the charge passed through the cathode.     

异步轧机轧辊稳定性的探讨

本文通过对异步轧制特点的分析,求出中性角及力能参数间的关系,从而导出了不同工作制度下的异步轧机工作辊偏移值的计算公式。本文结论将对改造现有轧机和设计新轧机提供理论依据。     

自动精密玻璃切割机的设计

本文重点介绍液晶产品生产线上不可缺少的基础设备———精密玻璃切割机的设计,包括切割机的工作原理、切割机部分关键部件的结构特点、切割机所能达到的精度等.     

Plasticity field adjacent to faces of asperities on a rotating roll after initial indentation into a half-space

The plastic deformation field near the horizontal surface of a half space of perfectly plastic material associated with an indenting rotating rigid tooth is studied using slip line theory. The tooth is one of many on a roll surface and indents first into the half-space material and then rotates about the roll center. A slip line field is proposed for the deforming plastic region and a solution scheme is outlined. The emphasis is on determining the shape of the deforming region, especially that of the free surface. The study has a potential application in roughness transfer in metal forming processing.     

近终形连铸技术的发展状况

近终形连铸技术是当今冶金科技领域的一门前沿学科。本文介绍目前近终形连铸技术的发展及趋势。在世界各国的研究中，美国比较注重单辊法，日本侧重于双辊法，西欧则侧重于改进结晶器的结构和功能，开发新型铸机     

三角形速度场解析平面变形辊拔与辊挤

文章对平面变形辊拔与辊挤问题建立了运动许可的三角形速度场并获得上界解析解。该解与 Avitzur 以连续速度场得到的上界解进行比较表明,有时本文解法可得到更低的上界值。     

Coupled lubrication and Stokes flow finite elements

A method is developed for performing a local reduction of the governing physics for fluid problems with domains that contain a combination of narrow and non‐narrow regions, and the computational accuracy and performance of the method are measured. In the narrow regions of the domain, where the fluid is assumed to have no inertia and the domain height and curvature are assumed small, lubrication, or Reynolds, theory is used locally to reduce the two‐dimensional Navier–Stokes equations to the one‐dimensional Reynolds equation while retaining a high degree of accuracy in the overall solution. The Reynolds equation is coupled to the governing momentum and mass equations of the non‐narrow region with boundary conditions on the mass and momentum flux. The localized reduction technique, termed ‘stitching,’ is demonstrated on Stokes flow for various geometries of the hydrodynamic journal bearing—a non‐trivial test problem for which a known analytical solution is available. The computational advantage of the coupled Stokes–Reynolds method is illustrated on an industrially applicable fully‐flooded deformable‐roll coating example. The examples in this paper are limited to two‐dimensional Stokes flow, but extension to three‐dimensional and Navier–Stokes flow is possible. Copyright © 2003 John Wiley & Sons, Ltd.     

计算机辅助螺纹钢孔型设计系统的开发及应用

型钢孔型设计是制定型钢轧制工艺的重要内容之一.传统孔型设计过程以人工经验为主,其计算繁琐,原材料消耗大.为提高生产效率,通过对螺纹钢延伸孔型系统、精轧孔型系统及成品孔型的构成和设计方法的分析,结合螺纹钢孔型系统的基本设计理论和实际生产经验,对以往孔型设计过程中所使用的数学模型、经验公式等进行了修正,并以结构化程序设计方法为基础,采用可视化编程工具Visual Basic6.0建立了计算机辅助螺纹钢孔型设计系统.试用效果表明,缩短了新产品的设计周期,降低了轧机能耗和生产成本.     

悬辊制管Ⅱ级管模质量问题分析和改进措施

介绍了悬辊制管的工序过程及从南方购进的悬辊制管Ⅱ级管模存在的质量问题，通过计算分析了引发这些质量问题的原因，并提出了相应的改进措施。     

A2017半固态合金二次加热组织演化

对SCR技术制备的A2017半固态坯料进行二次加热,利用光学显微镜,电镜,图像分析仪等手段,对坯料二次加热微观组织的演化进行了研究·实验结果表明,在相同加热温度条件下,随着保温时间的延长,晶粒平均等积圆直径增大,晶粒越来越圆整,液相率增加;提高二次加热温度,晶粒长大和球化速度加快·二次加热最佳工艺条件为加热温度580℃,保温时间40～60min或者加热温度600℃,保温20～40min,晶粒平均等积圆直径为70～90μm,固相率在70%左右,适合于半固态加工·组织演化机制分析表明,加热初期阶段,液相少,晶粒主要通过碰撞熔合快速长大;随着保温时间延长,液相增加,晶粒主要通过原子扩散慢速长大并发生...