高陡横坡段桩柱式桥梁双桩基础受力分析

基于高陡横坡段桩柱式桥梁双桩基础承载特性,提出了一种改进有限杆单元计算分析方法.分析了高陡横坡段桩柱式桥梁双桩基础承载机理及受力特性,建立了双桩基础计算分析模型.其次,根据前、后桩与边坡相对位置关系,给出了后桩所受剩余下滑力与前桩所受土压力的比例关系.在传统有限杆单元分析方法基础上,结合陡坡桩受力特征,导得了考虑桩土共同作用与"P-Δ"效应的单元刚度矩阵修正方法,并在此基础上编制了适用于高陡横坡段桩柱式桥梁双桩基础的有限杆单元分析MATLAB计算程序.采用室内模型试验对本文计算方法进行验证,给出了适用于陡坡段桥梁桩基的设计流程图.研究结果表明:本文理论计算值与模型试验实测结果吻合良好,表明本文计算方法正确可行,可为同类工程设计提供参考.     

如何做好桩基工程旁站监理

文章介绍了桩基工程旁站监理的过程和实效及保证监理目标实现的具体措施。     

On a stochastic nonlinear equation in one-dimensional viscoelasticity

In this paper we discuss an initial-boundary value problem for a stochastic nonlinear equation arising in one-dimensional viscoelasticity. We propose to use a new direct method to obtain a solution. This method is expected to be applicable to a broad class of nonlinear stochastic partial differential equations.

     

中心势场中粒子运动轨道的研究

在中心势场中粒子运动轨道方程的基础上,进一步讨论粒子轨道的闭合性、稳定性.     

超高层建筑-18.7m的深基坑施工优化

介绍了深达 18.7m的基坑围护措施 ,对超高层建筑深基坑支护结构与施工技术进行优化     

轴流风扇叶片端导叶作用的研究

本文采用数值方法研究了叶片端导叶对轴流风扇性能的影响。通过与普通开式轴流风扇比较,分析了叶片端导叶对内部流动作用的机理.数值计算结果表明:叶片端导叶的安装位置将影响轴流风扇气动效率,安装叶片端导叶不能提高风扇静压升,但是在压力面安装时能有效地减小风扇叶顶泄漏流与主流的掺混损失;在设计流量下,压力面安装叶片端导叶使泄漏涡的作用范围较小,涡核更靠近吸力面;吸力面安装叶片端导叶弱化了泄漏涡的强度但没有减小泄漏涡的作用范围。     

An AFM, XPS and electrochemical study of molecular electroactive monolayers formed by wet chemistry functionalization of H-terminated Si(1 0 0) with vinylferrocene

Molecular electroactive monolayers have been produced from vinylferrocene (VFC) via light-assisted surface anchoring to H-terminated n- and p-Si(1 0 0) wafers prepared via wet chemistry, in a controlled atmosphere. The resulting Si-C bound hybrids have been characterized by means of XPS and AFM. Their performance as semiconductor functionalized electrodes and their surface composition have been followed by combining electrochemical and XPS measurements on the same samples, before and after use in an electrochemical cell. White-light photoactivated anchoring at short (1 h) exposure times has resulted in a mild route, with a very limited impact on the initial quality of the silicon substrate. In fact, the functionalized Si surface results negligibly oxidized, and the C/Fe atomic ratio is close to the value expected for the pure molecular species. The VFC/Si hybrids can be described as (η⁵-C₅H₅)Fe²⁺(η⁵-C₅H₄)-CH₂-CH₂-Si species, on the basis of XPS results. Electrochemical methods have been applied in order to investigate the role played by a robust, covalent Si-C anchoring mode towards substrate-molecule electronic communication, a crucial issue for a perspective development of molecular electronics devices. The response found from cyclic voltammograms for p-Si(1 0 0) functionalized electrodes, run in the dark and under illumination, has shown that the electron transfer is not limited by the number of charge carriers, confirming the occurrence of electron transfer via the Si valence band. The hybrids have shown a noticeable electrochemical stability and reversibility under cyclic voltammetry (cv), and the trend in peak current intensity vs. the scan rate was linear. The molecule-Si bond is preserved even after thousands of voltammetric cycles, although the surface coverage, evaluated from cv and XPS, decreases in the same sequence. An increasingly larger surface concentration of Fe³⁺ at the expenses of Fe²⁺ redox centers has been found at increasing number of cv’s, experimentally associated with the growth of silicon oxide. Surface SiO⁻ groups from deprotonated silanol termination, induced by the electrochemical treatments, are proposed as the associated counterions for the Fe³⁺ species. They could be responsible for the observed decrease in the electron transfer rate constant with electrode ageing.     

电动势的测定及其应注意的问题

本课题通过用不同的方法测定的电动势分析,经过电动势测定的误差分析,找到各种方法的利弊,并且对电极制备以及测定电动势的装置进行改进,近而对问题进行探讨。改进后找到实验和研究的捷径,从而在高等学校化学实验以及生产中节省很多的人力和财力。     

Synthesis and characterization of a polyfluorene containing carbazole and oxadiazole dipolar pendent groups and its application to electroluminescent devices

We have synthesized a blue‐light‐emitting polyfluorene (PF) derivative ( PF‐CBZ‐OXD ) that presents bulky hole‐transporting carbazole and electron‐transporting oxadiazole pendent groups functionalized at the C‐9 positions of alternating fluorene units. The results from photoluminescence and electrochemical measurements indicate that both the side chains and the PF main chain retain their own electronic characteristics in the copolymer. An electroluminescent device incorporating this polymer as the emitting layer was turned on at 4.5 V; it exhibited a stable blue emission with a maximum external quantum efficiency of 1.1%. Moreover, we doped PF‐CBZ‐OXD and its analogue PF‐TPA‐OXD with a red‐light‐emitting iridium phosphor for use as components of phosphorescent red‐light emitters to investigate the effect of the host's HOMO energy level on the degree of charge trapping and on the electrophosphorescent efficiency. We found that spectral overlap and individual energy level matching between the host and guest were both crucial features affecting the performance of the electroluminescence devices. Atomic force microscopy measurements indicated that the dipolar nature of PF‐CBZ‐OXD , in contrast to the general nonpolarity of polydialkylfluorenes, provided a stabilizing environment that allowed homogeneous dispersion of the polar iridium triplet dopant. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2925–2937, 2007