考虑外委的露天矿剥岩计划的优化研究

针对“剥岩高峰”对矿山生产带来的不利影响，研究了设备配置更新策略与露天开采外委剥离的优化问题.基于铲运设备的运营成本与生产能力随设备役龄变化的关系，建立了决策单台设备退役时间的动态经济寿命计算模型，并根据此模型给出了具体的设备配置算法步骤.设置一系列不同的矿山自剥离量与外委剥离量的分界水平，计算各分界水平条件下的外委单价可行区间，然后在区间内确定外委商谈价格并分析得出与之对应的总成本净现值最低的外委方案.实例计算证明，采用该方法减少设备投资的成本要高于外委岩石剥离成本.     

Variational Derivative for Buckling Loads of Beams and Frames

The finite-difference method is a numerical technique for obtaining approximate solutions to differential equations. The main objective of the present study is to give a new aspect to the finite-difference method by using a variational derivative. By applying this formulation, accurate values of the buckling loads of beams and frames with various end supports are obtained. The performance of this formulation is verified by comparison with numerical examples in the literature __________ Published in Prikladnaya Mekhanika, Vol. 41, No. 7, pp. 139–144, July 2005.     

A parallel cell‐based DSMC method on unstructured adaptive meshes

A parallel DSMC method based on a cell‐based data structure is developed for the efficient simulation of rarefied gas flows on PC‐clusters. Parallel computation is made by decomposing the computational domain into several subdomains. Dynamic load balancing between processors is achieved based on the number of simulation particles and the number of cells allocated in each subdomain. Adjustment of cell size is also made through mesh adaptation for the improvement of solution accuracy and the efficient usage of meshes. Applications were made for a two‐dimensional supersonic leading‐edge flow, the axi‐symmetric Rothe's nozzle, and the open hollow cylinder flare flow for validation. It was found that the present method is an efficient tool for the simulation of rarefied gas flows on PC‐based parallel machines. Copyright © 2004 John Wiley & Sons, Ltd.     

强流四脉冲电子束源实验研究

 为了进行强流多电子束源研究，对现有2MeV LIA 注入器进行了四脉冲改造，二极管脉冲电压约500kV。实验研究了天鹅绒阴极在四脉冲条件下的发射能力、传导电流负载效应以及阴极等离子体运动对阴极电子发射和束能量的影响。利用空间电荷限制流模型推算出阴极等离子体膨胀速率在1 ~4cm/μs之间。     

调控体育课运动负荷的探讨

运动负荷是身体练习给人体带来的生理负担．体育课运动负荷的调控即通过各种有效手段，对一节体育课生理负荷的调节与控制过程．体育课运动负荷的调控应通过练习与讲解、练习与示范、练习与纠正错误、练习与变换练习等四种互动途径进行．     

某库岸滑坡稳定分析及治理措施研究

从地质条件出发,详细分析了滑坡的成因,以大型的岩土工程数值分析软件(ADINA)为研究手段,建立有限元计算模型,用强度折减的方法分析了滑坡体在初始工况、蓄水工况、暴雨工况、水位骤降工况和地震工况下的稳定情况,根据滑坡的失稳情况,在综合考虑的基础上,提出了削坡减载和地表排水相结合的治理措施,计算结果表明,治理措施是可行的,研究结果对设计和施工具有较大的参考价值.     

Randomization helps to perform independent tasks reliably

This paper is about algorithms that schedule tasks to be performed in a distributed failure‐prone environment, when processors communicate by message‐passing, and when tasks are independent and of unit length. The processors work under synchrony and may fail by crashing. Failure patterns are imposed by adversaries. Linearly‐bounded adversaries may fail up to a constant fraction of the processors. Weakly‐adaptive adversaries have to select, prior to the start of an execution, a subset of processors to be failure‐prone, and then may fail only the selected processors, at arbitrary steps, in the course of the execution. Strongly adaptive adversaries have a total number of failures as the only restriction on failure patterns. The measures of complexity are work, measured as the available processor steps, and communication, measured as the number of point‐to‐point messages. A randomized algorithm is developed, that attains both ??(n log*n) expected work and ??(n log*n) expected communication, against weakly‐adaptive linearly‐bounded adversaries, in the case when the numbers of tasks and processors are both equal to n. This is in contrast with performance of algorithms against strongly‐adaptive linearly‐bounded adversaries, which has to be Ω(n log n/log log n) in terms of work. © 2003 Wiley Periodicals, Inc. Random Struct. Alg., 2004     

Viscoelastic properties of nanostructured natural rubber/polystyrene interpenetrating polymer networks

The effects of the blend ratio and initiating system on the viscoelastic properties of nanostructured natural rubber/polystyrene‐based interpenetrating polymer networks (IPNs) were investigated in the temperature range of ?80 to 150 °C. The studies were carried out at different frequencies (100, 50, 10, 1, and 0.1 Hz), and their effects on the damping and storage and loss moduli were analyzed. In all cases, tan δ and the storage and loss moduli showed two distinct transitions corresponding to natural rubber and polystyrene phases, which indicated that the system was not miscible on the molecular level. However, a slight inward shift was observed in the IPNs, with respect to the glass‐transition temperatures (T_g's) of the virgin polymers, showing a certain degree of miscibility or intermixing between the two phases. When the frequency increased from 0.1 to 100 Hz, the T_g values showed a positive shift in all cases. In a comparison of the three initiating systems (dicumyl peroxide, benzoyl peroxide, and azobisisobutyronitrile), the dicumyl peroxide system showed the highest modulus. The morphology of the IPNs was analyzed with transmission electron microscopy. The micrographs indicated that the system was nanostructured. An attempt was made to relate the viscoelastic behavior to the morphology of the IPNs. Various models, such as the series, parallel, Halpin–Tsai, Kerner, Coran, Takayanagi, and Davies models, were used to model the viscoelastic data. The area under the linear loss modulus curve was larger than that obtained by group contribution analysis; this showed that the damping was influenced by the phase morphology, dual‐phase continuity, and crosslinking of the phases. Finally, the homogeneity of the system was further evaluated with Cole–Cole analysis. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1680–1696, 2003     

Load-Carrying Capacity of Circular Plates Made of a Fiber-Reinforced Composite

The load-carrying capacity of circular plates made of a fiber-reinforced composite and loaded with axisymmetric transverse forces under axisymmetric boundary conditions is investigated. The plates can be freely supported or clamped along their contour. To the known yield condition used, in the plane of main bending moments, there correspond irregular hexagons, which depend on the mechanical properties of composite constituents and some characteristic geometrical parameters. It is shown that, depending on the ratio of ultimate radial and circumferential bending moments, in the plastic state, the circular plates (the central part of the clamped plates) take the form of a cone or a frustum of cone. For each of the cases, the limit load is found, which is a function of the above-mentioned mechanical parameters. The statically allowable fields of bending moments and the corresponding allowable fields of deflection rates are determined. The solutions found are exact. Special cases for the freely supported plates are analyzed, and the results obtained are presented in the form of graphs.__________Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 2, pp. 177–192, March–April, 2005.     

Effect of a Shock Pulse on a Floating Ice Sheet

The vibrations of a viscoelastic plate lying on an elastic liquid base subjected to pulse loading have been studied theoretically and experimentally. The effect of the variable depth of the reservoir, plate thickness, and strain relaxation time on the value of the plate vibration amplitude and the length and curvature of the flexural gravity wave profile are analyzed. Good agreement of theoretical and experimental results is obtained.