热连轧精轧机组温度模型的改进

从实际生产数据入手,研究了温度模型设定精度的现状及设定精度与各影响因素之间的关系,同时还消化了原来的温度模型程序并将其移植到微机上.经大量的离线统计回归分析,提出了一个行之有效的温度模型改进方案.该改进方案的思路同样适合其他热轧生产线.     

Phenol biosensor based on electrochemically controlled integration of tyrosinase in a redox polymer

An amperometric biosensor for the detection of phenolic compounds was developed based on the immobilization of tyrosinase within an Os-complex functionalized electrodeposition polymer. Integration of tyrosinase within the redox polymer assures efficient catechol recycling between the enzyme and the polymer bound redox sites. The non-manual immobilization procedure improves the reproducibility of fabrication process, greatly reduces the desorption of the enzyme from the immobilization layer, and, most importantly prevents fast inactivation of the enzyme by its substrate due to fast redox cycling. A two-layer sensor architecture was developed involving ascorbic acid oxidase entrapped within an electrodeposition polymer in a second layer on top of the redox polymer/tyrosinase layer. Using this sensor architecture it was possible to eliminate the current interference arising from direct ascorbate oxidation up to a concentration of 630 μM ascorbic acid. The effects of the polymer thickness, the enzyme/polymer ratio, and the applied potential were evaluated with respect to optimal sensor properties. The sensitivity of the optimized sensors for catechol was 6.1 nA μM⁻¹ with a detection limit of 10 nM, and for phenol 0.15 nA μM⁻¹ with a detection limit of 100 nM.     

Comparison of different reactive organophosphorus flame retardant agents for cotton: Part I. The bonding of the flame retardant agents to cotton

N-Methylol dimethylphosphonopropionamide (MDPA), known as “Pyrovatex CP” and “Pyrovatex CP New” commercially, has been one of the most commonly used durable flame retardant agents for cotton for many years. In our previous research, we developed a flame retardant finishing system for cotton based on a hydroxy-functional organophosphorus oligomer (HFPO) in combination with a bonding agent such as trimethylolmelamine (TMM) and dimethyloldihydroxyethyleneurea (DMDHEU). In this research, we investigated the bonding of these two flame retardant finishing agents to cotton. We found that the majority of MDPA is bound to cotton by its N-methylol group and that the use of TMM as a co-reactant modestly increases the fixation of MDPA onto cotton. For HFPO, however, the use of a bonding agent is necessary to form a covalent linkage between HFPO and cotton. Both the fixation of HFPO on cotton and its laundering durability are influenced by the effectiveness and concentration of the bonding agent. The commercial product of HFPO contains approximately 33% more phosphorus than that of MDPA and the percent fixation of HFPO on cotton is also moderately higher than that of MDPA. The bonding between MDPA and cotton is significantly more resistant to hydrolysis during multiple launderings than that between HFPO and cotton. The selection of catalyst also plays a significant role in influencing the bonding of the flame retardant agents to cotton.     

Use of α‐diketones as visible photoinitiators for the photocrosslinking of waterborne latex paints

The efficiency of several α‐diketones as visible light photoinitiators for the crosslinking of waterborne latex dispersions in the presence of acrylic monomers was evaluated. Among the eight α‐diketones studied, camphorquinone allows the fastest curing speed, and the curing of the acrylic waterborne coating is not affected by the presence of oxygen. The properties of the sunlight‐cured volatile organic compound (VOC)‐free pigmented paints prepared from the waterborne latex are as good or better than the equivalent conventional paint containing VOCs. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3171–3181, 2002     

Mechanical and physico-chemical characterization of cyclodextrin finished polyamide fibers

We present the study of the cyclodextrin (CDs) finishing of polyamide fibers (PA) by means of citric acid (CTR) as crosslinking agent. We observed that the mode of grafting happened by the formation of a crosslinked polymer formed between CTR and CDs. This polymer physically adhered to the fibers network and was resistant to hot water washings. Modified fibers were characterized by evaluating the contact angle with a polar liquid and by studying the hysteresis of damping of PA fibers (Cahn balance) with various grafting rates and by studying the absorptivity of grafted fabrics via the technique of the posed drop (Digidrop^® instrument). Then a mechanical characterization of the PA fabrics grafted with various proportions of CDs was accomplished, by traction and tear tests by using a tensile-test bench Lohmergy. Finally a topographic study of PA grafted surfaces was approached by atomic force microscopy (AFM and LFM; contact and non-contact mode) which permitted to evaluate the roughness and the chemical heterogeneity of the grafted surfaces.     

Synthesis and antimicrobial activity of a perfluoroalkyl-containing quaternary ammonium salt

A novel perfluoroalkyl-containing quaternary ammonium salt 5 was designed and synthesized. Consequently, the antimicrobial activities of compound 5 were measured with Escherichia coli 8099 as a Gram-negative strain and Staphylococcus aureus ATCC 6538 as a Gram-positive strain. Both the minimum inhibitory concentration (MIC, the lowest concentration of compound 5 that inhibits microbial growth) values of quaternary ammonium salt 5 against Escherichia coli 8099 and Staphylococcus aureus ATCC 6538 were 7.8 μg/ml.     

Enhancement of the static SIMS secondary ion yields of lipid moieties by ultrathin gold coating of aged oil paint surfaces

Static secondary ion mass spectrometry (SIMS) is a powerful technique for identification and localization of pigments and binding media present in traditional paintings. Coating the surface of a cross‐section with a 20 Å thick gold layer improves the yields of secondary ions from the fatty acids and diacids. A chalk tablet containing 1% stearic acid, which was partially covered during gold deposition, is used as a test system to investigate the increase of the organic secondary ion yields upon gold deposition in SIMS imaging. A comparative study of a native and gold‐coated aged surface of a lead white‐containing linseed oil paint demonstrates the enhancement of the organic ion yields on a sample relevant for painting studies. The yields of oil paint‐derived negative ions increase by a factor of 3 whereas the yields of positive ions increase by a factor of 2–4. The different types of charged functional groups determine the degree of improvement in yield. Gold coating improves the ionization process of the fatty acids and does not influence their fragmentation. The dissociation of the lead white by the primary ion beam is reduced due to the gold coating. Copyright © 2004 John Wiley & Sons, Ltd.     

Synthesis of perfluoroalkyl-containing multifunctional groups compounds for textile finishing

A new kind of perfluoroalkyl-containing multifunctional groups compound was designed. Treatment of 1H,1H,2H,2H-perfluorooctyltrichlorosilane (4) with allylmagnesium bromide provided key intermediate 1H,1H,2H,2H-perfluorooctyltriallylsilane (2). Hydroboration followed by oxidation, epoxidation and dihydroxylation of 2 gave perfluoroalkyl-containing multifunctional groups compound 1a, 1b and 1c, respectively.     

常温快速锌系磷钝化工艺

讨论了薄板及其配件在喷漆前的化学预处理工艺方法。通过优化实验，确定了化学预处理的工艺流程、磷化液组成及工艺条件。生产实践表明，常温、快速锌系磷钝化工艺能够得到均匀、细致的磷化膜，提高了与涂漆层的结合力。     

脉冲电化学齿轮光整加工电源设计与研究

脉冲电化学齿轮光整加工工艺具有加工效率高、成本低、表面质量好等特点，其实现的关键环节之一是高频、大功率脉冲电源，因此介绍了脉冲电化学齿轮光整加工工艺的原理及特点，论述了脉冲电源的构成原理及设计思路，设计制造出基于现代电力电子器件——绝缘栅双极晶体管(IGBT)的高频、大功率脉冲电源；应用该电源进行齿轮脉冲电化学光整加工试验，得到了满意的结果。