Evolution of ferronickel particles during the reduction of low-grade saprolitic laterite nickel ore by coal in the temperature range of 900–1250℃with the addition of CaO–CaF2–H3BO3

The method of producing ferronickel at low temperature(1250–1400℃)has been applied since the 1950s at Nippon Yakin Kogyo,Oheyama Works,Japan.Limestone was used as an additive to adjust the slag composition for lowering the slag melting point.The ferronickel product was recovered by means of a magnetic separator from semi-molten slag and metal after water quenching.To increase the efficiency of magnetic separation,a large particle size of ferronickel is desired.Therefore,in this study,the influences of CaO,CaF₂,and H₃BO₃ additives on the evolution of ferronickel particle at≤1250℃were investigated.The experiments were conducted at 900–1250℃with the addition of CaO,CaF₂,and H₃BO₃.The reduction processes were carried out in a horizontal tube furnace for 2 h under argon atmosphere.At 1250℃,with the CaO addition of 10 wt%of the ore weight,ferronickel particles with size of 20μm were obtained.The ferronickel particle size increased to 165μm by adding 10 wt%CaO and 10 wt%CaF₂.The addition of boric acid further increased the ferronickel particle size to 376μm,as shown by the experiments with the addition of 10 wt%CaO,10 wt%CaF₂,and 10 wt%H₃BO₃.     

复方单硝酸异山梨酯-阿司匹林双缓释微丸胶囊的研制(Ⅱ)

以乙基纤维素、丙烯酸树脂Ⅱ和丙烯酸树脂Ⅲ为骨架材料分别制备单硝酸异山梨酯和阿司匹林混合骨架缓释微丸，并通过包薄膜衣进一步控制药物的释放。通过测定微丸的释放度对处方工艺进行评价，选择最佳微丸灌装胶囊．胶囊中两种药物均达到良好的缓释效果。符合中国药典对缓释制剂的要求．其体外释放过程同时符合Higuchi方程和一级释药方程，R^2值均在0．995以上。     

合理预留安全矿柱的探讨

矿床地下开采时,在没有其他安全措施的情况下,不得不采用预留安全矿柱的方法,以保护地面建筑物、构筑物和主要井巷免受因地下采矿而引起的破坏。但这会导致矿量的损失,故需要寻找合理预留安全矿柱的方法。作者用解析的方法对预留安全矿柱进行研究,突破了常用的传统方法。     

泛连通图定理和Ore2条件

记Ore2=min{d(y) d(x)|x,y∈V(G),d(x,y)=2}，本得到：若n阶图G的Ore2≥n 1，则G是[5;n]泛连通图。此是比Faudree等人的定理进一步的结果。     

Thermal Analysis in Examination of Reduction of Blast Furnace Pellets

This paper presents applications of thermal analysis to observe the course of reduction of acidic pellets, metallurgical substances whose reducibility and strength are basic parameters of use in blast furnace processes. Both parameters depend on the mineral composition of the samples. The investigations included determination of the chemical and phase compositions of the initial samples and reduction products. Research was conducted on acidic pellets from Połtawa (Poland), applied in the T. Sendzimir Steelworks (Poland), in comparison with pellets from Brazil, Canada and Lebedyn (Russia). This revised version was published online in August 2006 with corrections to the Cover Date.     

Solid sampling Fourier transform infrared determination of Mancozeb in pesticide formulations

A series of approaches have been assayed for FTIR determination of Mancozeb in several solid commercial fungicides using different calibration strategies. The simplest procedure was based on the use of the ratio between the absorbance of a characteristic band of Mancozeb and that of a KSCN internal standard measured in the FTIR spectra obtained from KBr pellets. It was employed the quotient between peak height absorbance values at 1525 cm⁻¹ for Mancozeb and 2070 cm⁻¹ for KSCN. In these conditions a precision as relative standard deviation (RSD) of 0.6% and a relative accuracy error of 0.8% (w/w) were found. For complex formulations, containing other compounds with characteristic absorption bands at different wavenumbers than Mancozeb, one of them was used as internal reference being employed the standard addition approach. In this case, the Mancozeb bands at 1525 cm⁻¹ or at 1289 cm⁻¹ were employed, being used the ferrocyanide band at 2075 cm⁻¹ as internal reference. RSD values between 0.7-1.4% and a relative accuracy error of 3% (w/w) were found. A third strategy was based on the use of partial least squares (PLS) calibration. A reference set was prepared mixing Mancozeb, Kaolin, Cymoxanil and KBr, being predicted the Mancozeb concentration in pesticide formulations by using the quotient between absorbance bands of Mancozeb and those of Cymoxanil. In these conditions a relative accuracy error of 0.6% (w/w) and a relative standard deviation of 1.3% were found.     

火焰原子吸收法测定铅锌矿中微量镓

将样品中的硫化物用HNO3氧化为硫酸盐后，再用HNO3、HF、H2SO4进一步溶解，在6mol/LHCl介质中用乙酸丁酯萃取镓，水反萃取后，用火焰析子吸收法测定Ga，该法检出限为0．80μg/mL，相对标准偏差为2．1％，用该法测得国家一级标准品的结果均与推荐值相符。     

分光光度计测铁矿石中钛的测量不确定度评定

紫外-可见分光光度计在化学分析中应用较为广泛。对于借助其进行化学分析测量不确定度的评定，目前较多见于溶液测定。实际应用中，测试样品多为固体，涉及到称样、溶解、稀释、定容等步骤。此文试从随机效应和系统效应的角度考虑，对紫外-可见分光光度计应用ISO4691：1985铁矿石中钛含量的测定——二安替比林甲烷分光光度法对铁矿石中钛的测量过程中的不确定度来源进行了较为全面的分析，并最终给出评定结果。     

唐钢二炼铁厂使用巴西MBR块矿的生产应用

分析了巴西MBR块矿的矿相结构、矿物组成及冶金性能.MBR块矿的各项冶金性能较好,与烧结矿组成的综合炉料在高炉内的同化过程开始温度和结束温度均较高,但同化速度相对减慢.唐钢二炼铁厂的炼铁生产实践结果表明,适当配用MBR块矿,高炉入炉品位上升,矿耗降低,综合焦比下降,铁成本降低,高炉顺行状态良好.MBR块矿在改善高炉综合技术经济指标的过程中起着重要作用.     

Fe3+离子在低品位铜矿生物浸出中的行为分析

生物浸出中容易产生铁矾而影响目的矿物的浸出速度。文中就这一问题，围绕与Fe^3 有关的各种因素进行了详细分析，旨在充分发挥Fe^3 离子的氧化作用，又尽量减少其产生的负面影响。分析表明，在驯化适应低酸条件下浸矿细菌的基础上，合理调配酸性介质pH值、铁浓度、细菌氧化活性、氧化还原电位Ek值之间的关系，能使铁产生的沉淀降到最小化。