Strain induced strengthening of soft thermoplastic polyurethanes under cyclic deformation

We investigate the cyclic mechanical behavior in uniaxial tension of three different commercial thermoplastic polyurethane elastomers (TPU) often considered as a sustainable replacement for common filled elastomers. All TPU have similar hard segment contents and linear moduli but sensibly different large strain properties as shown by X-ray analysis. Despite these differences, we found a stiffening effect after conditioning in step cyclic loading which greatly differs from the common softening (also referred as Mullins effect) observed in chemically crosslinked filled rubbers. We propose that this self-reinforcement is related to the fragmentation of hard domains, naturally present in TPU, in smaller but more numerous sub-units that may act as new physical crosslinking points. The proposed stiffening mechanism is not dissimilar to the strain-induced crystallization observed in stretched natural rubber, but it presents a persistent nature. In particular, it may cause a local reinforcement where an inhomogeneous strain field is present, as is the case of a crack propagating in cyclic fatigue, providing a potential explanation for the well-known toughness and wear resistance of TPU.     

高静态动作压力下粉尘爆炸泄放标准的可靠性

粉尘爆炸泄放设计标准的可靠性对能否实现爆炸防护尤为关键.以中径70μm石松子粉尘为介质,采用20 L球形粉尘爆炸装置进行了4种泄放口径、静态动作压力在0.12~0.6 MPa的爆炸泄放实验,对比了实验值与NFPA 68和EN 14491计算值.结果表明,NFPA 68在预测高静态动作压力下的泄放面积时,随着泄放口径的增大,预测结果由保守变为危险,但预测结果精度较好且数值稳定;EN 14491在预测高静态动作压力下的泄放面积时非常保守,预测精度较差,数据不可靠.依据两种标准推荐的经验函数关系,分析了NFPA 68和EN 14491在预测高静态动作压力时产生这种差异的原因.     

Surfaces of Constant Mean Curvature Bounded by Two Planar Curves

In this paper we study constant mean curvature compact surfaces with two Jordan curves in parallel planes as boundary and we investigate the point at which the surface inherits the symmetries of its boundary.     

离散边界条件系统的最优控制

研究离散边界条件系统的最优控制问题，给出了最优控制存在的必要条件，证明了此类系统最优控制仍有最大值原理成立。     

也谈分段函数的初等性

主要讨论一类能表示成最大值函数、最小值函数的分段函数的初等性。证明了只要能表示成最大值函数或最小值函数的分段函数一定是初等函数。     

利用CCD光电测量系统测量杨氏弹性模量

提出一种测量微小伸长量的光电测量方法,即利用CCD光电测量系统将单缝衍射的光强分布转换为电信号,经过计算机处理后输出光强分布曲线,从相邻波谷读出衍射条纹间隔,通过软件的简单操作直接输出测量结果.实现了数据采集及运算结果的实时化、半自动化,并克服了传统方法的测量困难和数据处理的复杂计算.利用这一方法测定了钢丝的杨氏弹性模量,与标称值符合得较好.     

具有扩散的Lotka-Volterra系统的持续性

利用最大值原理结合上、下解的方法，讨论了一类具有扩散的竞争－捕食的Lotka-Volterra系统静态解的存在性与持续生存。     

Preservation of Lipschitz constants by Bernstein type operators

Summary We obtain preservation inequalities for Lipschitz constants of higher order in simultaneous approximation processes by Bernstein type operators. From such inequalities we derive the preservation of the corresponding Lipschitz spaces.     

四阶非线性边值问题解的存在性与上下解方法

该文讨论四阶常微分方程边值问题u^(4)(t)=f(t,u,u″), t∈［0,1］,u(0)=u(1)=u″(0)=u″(1)=0解的存在性, 其中f(t,u,v):［0,1］×R×R→R为Carathéodory函数. 在不限制f关于u,v的增长阶, 不假定f关于u,v的单调性的一般情形下, 用上下解方法获得了解的存在性结果,并讨论了单调迭代求解的有效性.     

相对论平均场理论中各种有效相互作用对中子星性质的影响

基于相对论平均场理论，研究了各种相互作用参数组(NL1、NL3、NLSH、TM1和GL-97)对中子星物质的性质和中子星整体结构的影响．发现参数组NL1、NL3和NLSH所给出的中子星内部的介子场强度、物质的组成比例、物态方程和中子星的整体特点基本相同，但与TM1和GL-97之间有较大的差别．相对于其他参数组，GL-97给出的介子场强度最弱，中子星的相对数密度最大，物态方程也最软，同时采用GL-97参数组计算的中子星的最大质量也最小．