Application of high-melting pyridinium salts as ionic liquid catalysts and media for fischer esterification

Pyridinium methanesulfonate (m.p. 185°C) and pyridinium p-toluenesulfonate (m.p. 121°C) were used as catalysts and media for the esterification of carboxylic acids with primary alcohols to give the corresponding esters selectively in high yields. The high melting points of these pyridinium salts did not prevent their application as ionic liquid medium for these reactions which were performed at 90°C.     

Convenient Esterification of Carboxylic Acids by SN2 Reaction Promoted by a Protic Ionic-Liquid System Formed in Situ in Solvent-Free Conditions

The reaction of esterification of benzoic acid with benzyl chloride was chosen as a model reaction to study the esterification by S_N2 promoted by tertiary amine as deprotonating agent. The use of ionic liquid (IL) 1,3-dimethylimidazolium methanesulfonate [MMIm][OMs] as reaction medium has proven to give quantitative yield of the ester, but interestingly the reaction does occur even in solvent-free conditions, where the acid + the amine form a liquid system (a protic IL) in situ. This last methodology was extended to several carboxylic acids in conditions of atom economy (i.e., without excess of any reagent), giving moderately good yields of esters (54–78%) recovered by weight in pure form.     

含丝氨酸残基手性肽核酸单体的合成

对文献合成方法进行了改进．以N—Boc氨基酸与自制甲烷磺酸酯反应，制备N—Boc氨基酸丙烯酯，以混合酸酐法实现关键中间体与1-胸腺嘧啶乙酸的缩合，总收率为26．4％，比文献方法提高了12％，成本降低，制备了含丝氨酸残基碱基为胸腺嘧啶的手性肽核酸单体．     

甲基磺酸铜制备的绿色工艺与动力学

甲基磺酸(ＭＳＡ)及其盐类能改善镀层性能,并可实现无氰电镀[1-4],本文采用空气氧化法直接由紫Ｃｕ与ＭＳＡ水溶液反应生产(ＣＨ3ＳＯ3)2Ｃｕ·5Ｈ2Ｏ,达到了工艺绿色化的要求。1　实验部分1 1　试剂与仪器70%ＭＳＡ(宝鸡科隆化工有限公司);99 9%紫铜片(沈阳冶炼厂);氧气(宝鸡有色金属加工厂氧气分厂);其余试剂均为分析纯试剂。ＡＡ7003Ａ原子吸收光谱仪(北京市东西电子技术研究所);ＰＩＣ-8型离子色谱仪(青岛普仁仪器有限公司);超级恒温槽。1 2　实验将500ｍｌ三口磨口烧瓶装于超级恒温槽中,装温度计、鼓气管,第三只磨口连续接装3支磨…     

Oxoanionic Noble Metal Compounds from Fuming Nitric Acid: The Palladium Examples Pd(NO3)2 and Pd(CH3SO3)2

The oxidation of elemental palladium at 100 °C in a mixture of fuming nitric acid and a pyridine‐SO₃ complex leads to the anhydrous nitrate Pd(NO₃)₂ (monoclinic, P2₁/n, Z=2, a=469.12(3) pm, b=593.89(3) pm, c=805.72(4) pm, β=105.989(3)°, V=215.79(2) ų). The Pd²⁺ ions are in square‐planar coordination with four monodentate nitrate groups which are connected to further palladium atoms, leading to a layer structure. The reaction of elemental palladium with a mixture of fuming nitric acid and methanesulfonic acid at 120 °C leads to single crystals of Pd(CH₃SO₃)₂ (monoclinic, P2₁/n, Z=2, a=480.44(1) pm, b=1085.53(3) pm, c=739.78(2) pm, β=102.785(1)°, V=376.254(17) ų). Also in this structure the Pd²⁺ ions are in square‐planar coordination with four monodentate anions; however, the connection to adjacent palladium atoms leads to a chain‐type structure. The thermal decomposition of the compounds has been investigated by means of DSC/TG measurements. Furthermore, IR and Raman spectra have been recorded, and an assignment of the observed vibrational frequencies has been carried out based on theoretical investigations.     

Synthesis of the water-soluble [Rh(Tpms)(CO)(PTA)] compound, the first transition metal complex bearing the 1,3,5-triaza-7-phosphaadamantane (PTA) and the tris(1-pyrazolyl)methanesulfonate (Tpms) ligands

The water-soluble Rh^I compound [Rh(Tpms)(CO)(PTA)] (1) (Tpms = O₃SC(pz)₃⁻, PTA = 1,3,5-triaza-7-phosphaadamantane) has been easily prepared in high yield by a single-pot reaction of [{Rh(CO)₂(μ-Cl)}₂] with PTA and the tris(1-pyrazolyl)methanesulfonate lithium salt Li(Tpms), in a CH₂Cl₂/MeOH solution at room temperature. This synthetic strategy can be easily applied to the preparation of general [Rh(Tpms)(CO)(L)] (L = phosphine) complexes and constitutes a substantial improvement over the previously described procedures. Compound 1 is air stable in the solid state and water-soluble, affording stable solutions under an inert atmosphere. It has been characterized by IR, ¹H, ³¹P{¹H} and ¹³C{¹H} NMR spectroscopies, elemental and single crystal X-ray diffraction structural analyses. The solid state structure of 1 has a square-planar geometry with the Tpms ligand coordinating the metal centre in a (κ²: N,N) bipodal mode. The title compound has also been investigated by cyclic voltammetry in CH₃CN, and values of the E_L Lever and P_L Pickett electrochemical parameters (which measure the ligand net electron-donor character) are proposed for the PTA ligand. Complex 1 represents the first example of a transition metal complex bearing both PTA and Tpms (or any other tris(1-pyrazolyl)methane or derivative) ligands.     

过渡金属甲基磺酸盐催化醇的四氢吡喃化反应

以过渡金属甲基磺酸盐［Mn(CH₃SO₃)₂·2H₂O, Cu(CH₃SO₃)₂·4H₂O, Co(CH₃SO₃)₂·4H₂O和Zn(CH₃SO₃)₂·4H₂O］为催化剂,在室温条件下催化醇的四氢吡喃化反应,并对反应条件进行了优化。结果表明：当醇用量为30 mmol,醇和3,4-二氢吡喃摩尔比为1.0 ：1.1,甲基磺酸盐用量为1 mmol,二氯甲烷20 mL时,可高效催化醇的四氢吡喃化反应。与路易斯酸催化活性相比,过渡金属甲基磺酸盐催化醇的四氢吡喃化反应效果最好,催化酚的效果较差。用Mn(CH₃SO₃)₂·2H₂O和Cu(CH₃SO₃)₂·4H₂O催化正丁醇的四氢吡喃化反应,重复使用5次,收率分别为89%和92%。     

Crystal structure,thermal decomposition mechanism and catalytic performance of hexaaquaaluminum methanesulfonate

Hexaaquaaluminum methanesulfonate crystals, [Al(H₂O)₆][CH₃SO₃]₃ were synthesized by a hydrothermal reaction of Al(OH)₃ with methanesulfonic acid. Single-crystal diffraction determination revealed that Al³⁺ was coordinated by six water molecules in octahedral geometry, while the CH₃SO₃^– anion connected with Al³⁺ through coordinated water molecules by hydrogen bonds. The six-coordinate environment of Al was also determined by ²⁷Al MAS NMR measurement. Thermogravimetric analysis and Fourier transform infrared spectroscopy showed that the decomposition intermediate at 265–365 °C was Al₂(μ-OH)(CH₃SO₃)₅ and the final product was amorphous Al₂O₃ residue with about 0.8 wt% SO₃ at 520–800 °C. A pure phase of [Al(H₂O)₆][CH₃SO₃]₃ was confirmed by powder X-ray diffraction analysis. Esterification of n-butyric acid with n-butanol and ketalization of cyclohexanone with glycol catalyzed by [Al(H₂O)₆][CH₃SO₃]₃ and Al₂(μ-OH)(CH₃SO₃)₅, respectively, proceeded in 100% yield by continuously removing the produced water. In the case of tetrahydropyranylation of n-butanol at room temperature in dichloromethane, the catalytic activity of [Al(H₂O)₆][CH₃SO₃]₃ was much lower than that of Al₂(μ-OH)(CH₃SO₃)₅. Furthermore, both [Al(H₂O)₆][CH₃SO₃]₃ precursor and Al₂(μ-OH)(CH₃SO₃)₅ catalysts could be recycled.     

甲基磺酸镧催化合成柠檬酸三(2-乙基)己酯的研究

PVC塑料助剂的主增塑剂邻苯二甲酸酯类在过去几十年得到了广泛的应用[1],近年来研究发现,这类增塑剂用于食品包装材料、玩具等可诱发致癌,特别是对婴儿和儿童的生长和发育影响更大[2-3]。柠檬酸酯系列增塑剂具有无毒、生物降解性好、挥发性小、抗细菌,增塑效率高等优点,被FDA认     

甲基磺酸铅的应用与制备研究

当前，甲基磺酸铅正在取代氟硼酸盐电镀液，广泛应用于印制板电镀与精饰、电子元件、线材和带材镀锡铅合金等电化学领域。研究了甲基磺酸铅的电化学合成方法，以替代传统的化学合成法。摸索了最佳试验参数为：电流密度5．5A／dm^2；反应温度350℃，电解液流速87mL／s，反应时间为3．33h。