六甲氧基甲基三聚氰胺-多元醇-丙烯酸酯混杂聚合体系的研究

六甲氧基甲基三聚氰胺 (HMMM) 多元醇 丙烯酸酯 酸催化剂混杂聚合体系在高温下同时进行缩聚和自由基聚合并表现出协同效应 .体系中的活泼亚甲基在HMMM的催化下被空气氧化成过氧化氢物 ;过氧化氢物在酸催化下分解成自由基进而引发自由基聚合反应 .研究结果表明 ,体系中存在固化加速的协同效应 ;同时体系中还存在热互补效应 ,丙烯酸酯的自由基聚合反应放出的热可以传递给缩聚反应 ,满足缩聚反应吸热的要求 .混杂聚合得到的高分子合金膜具有优良的机械性能和耐溶剂性能 ,这是由于在混杂聚合过程中形成了互穿聚合物网络 (IPN)结构 .使用潜酸催化剂作为酸的来源 ,可以提高体系的储存稳定性 ;交联 引发剂的使用可以拓宽它的使用范围 ;对超枝化聚合物在混杂体系中的应用也进行了初步研究     

六甲氧基甲基三聚氰胺-多元醇-丙烯酸酯混杂聚合过程热互补效应的研究

六甲氧基甲基三聚氰胺（HMMM）－多元醇－丙烯酸酯－酸催化剂的混合体系在较高温度下同时进行缩聚和自由基聚合并表现出协同效应，DSC研究结果表明，丙烯酸酯在HMMM和酸的催化作用下可在较低温度下发生自由基聚合反应，并把反应释放出来的大量的热量有效地传递给缩聚发反应，满足缩聚反应吸热的要求，从而节省固化所需要的能量，为了提高储存稳定性。本文以潜酸催化剂作为酸的来源，对该混杂聚合体系进行了研究，仍有明显的热互补效应。     

密胺-脲甲醛树脂合成工艺放大研究

以密胺－脲甲醛树脂合成的小试工艺条件为依据，完成了放大试验过程的工艺研究。研究结果与小试研究的工艺条件相吻合。     

Demonstration of methylene-ether bridge formation in melamine-formaldehyde resins

¹H and ¹³C NMR have been used for the quantitative determination of methylene-ether bridges in melamine-formaldehyde (MF) resins. The amount of methylene-ether bridges was determined by ¹³C NMR from the number of monomethylolated amino groups consumed in the condensation reactions and is in agreement with that calculated from the condensation water contents. This latter method, which involves a combination of ¹H and ¹³C NMR, is based on the amount of condensation water released during the formation of both methylene and methylene-ether bridges. © 1995 John Wiley & Sons, Inc.     

生物农药微胶囊制备研究

 报道以蜜胺树脂作为囊壁材料,使用原位聚合法对生物农药阿维菌素进行包囊,制备微胶囊制剂.结果表明蜜胺树脂是较好的生物农药用微胶囊缓释剂型的囊壁材料,其制备工艺简单,具有良好的的外观形貌、粒径大小分布、稳定性、悬浮性等,包封率为83.24%.     

基于银薄膜/荷叶SERS效应直接检测婴儿配方奶粉中三聚氰胺

以天然荷叶为衬底,结合真空磁控溅射法沉积银薄膜,制备出了一种高效的表面增强拉曼散射(SERS)活性基底.研究发现银/荷叶基底对婴儿配方奶粉中掺杂的三聚氰胺(MA)表现出良好的识别能力,而不需作额外的样品预处理.对掺杂不同浓度三聚氰胺的奶粉溶液进行定量分析,在5~50 mg/L质量浓度范围内获得了较好的线性关系(线性相关系数R20.99).根据3σ准则,检测极限估计为1 mg/L.此外,银/荷叶基底具有良好的均匀性和重复性(相对标准偏差为7.64%和10.54%).该方法对婴儿配方奶粉中三聚氰胺的检测具有简单快速、成本低且无损等优点.     

Optimized Synthesis of Silver Nanoparticles by Factorial Design with Application for the Determination of Melamine in Milk

A colorimetric method based on silver nanoparticles was developed for the determination of melamine in milk. Silver nanoparticles were synthesized without any stabilizer, using sodium borohydride as the reducing agent. Optimization of the variables for the formation of the nanoparticles was performed by factorial design, resulting in stable colloidal silver nanoparticles with a mean diameter of 14.0?±?2.7?nm. Spectrophotometric measurements performed at 475?nm showed a linear range from 0.033 to 1.50?mg?L^?1 of melamine with limits of detection and quantification of 0.009 and 0.031?mg?L^?1, respectively. The method provided highly sensitive determination of melamine in milk.     

A mixed-ligand approach for building a N-rich porous metal-organic framework for drug release and anticancer activity against oral squamous cell carcinoma

Abstract

A new Zn(II) metal-organic framework (MOFs), [Zn(BTC)(HME)]·(DMAc)(H₂O) (1, H₃BTC =1,3,5-benzenetricarboxylic acid, HME?=?protonated melamine, DMAc?=?N,N-dimethylacetamide), has been synthesized under solvothermal conditions. In the structure of 1, the four-coordinate Zn(II) ions are connected by BTC^3? ligands into a 3-D framework with (3)-connected utg-type topology. This MOF shows permanent porosity after lattice solvent removal with a calculated pore size distribution around 0.72?nm. With abundant N-donor sites and suitable pore size, the desolvated 1 (1a) was used as a drug carrier for the loading of anticancer drug 5-fluorouracil (5-Fu) molecules. Moderate 5-Fu loading capacity and long drug release time were observed for 1a. The computational simulation results reveal that strong H-bond interactions between the 5-Fu molecules and the nitrogen sites allow slow release of the drug 1a. In addition, the in vitro cytotoxicity of 1 and 5-Fu loaded 1a were also evaluated using MTT assays against human oral squamous cell carcinoma (SCC-251 and HSC-4).     

Magnetic‐based picolinaldehyde–melamine copper complex for the one‐pot synthesis of hexahydroquinolines via Hantzsch four‐component reactions

A picolinaldehyde–melamine copper complex was loaded on a magnetic Fe₃O₄ core, so that it contained 0.33 mmol of Cu per gram, and was used as an efficient catalyst. The as‐synthesized catalyst was characterized using various techniques, including Fourier transform infrared spectroscopy, X‐ray diffraction, energy‐dispersive X‐ray spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometry and thermogravimetric analysis. The catalyst was used to activate the raw materials in the synthesis of hexahydroquinoline derivatives in one‐pot four‐component reactions. Low reaction time (minutes versus half an hour), solvent‐free condition and magnetically separable catalyst are some salient features of the developed catalyst. Also, the optimum amount of catalyst and temperature were determined as 0.07 g and 87.6 °C, respectively, which were obtained using response surface methodology and optimization techniques.     

Poly(vinyl alcohol)/melamine phosphate composites prepared through thermal processing: thermal stability and flame retardancy

Poly(vinyl alcohol)/melamine phosphate composites (PVA/MP) as a novel halogen‐free, flame‐retardant foam matrix were prepared through thermal processing, and then their thermal stability and flame retardancy were investigated by thermo‐gravimetric analysis, micro‐scale combustion calorimeter, cone calorimeter, vertical burning test, and limiting oxygen index (LOI) test. It was found that the thermal stability and combustion properties of the PVA/MP composites could be influenced by the addition of MP. Compared with the control PVA sample (B‐PVA), in the PVA/MP (75/25) composites, the temperature at 5% mass loss (T_5%) decreased about 10°C, the residual chars at 600°C increased by nearly 27%, the temperature at the maximum peak heat release rate (T_P) shifted from 292°C to 452°C, and the total heat released and the heat release capacity (HRC) decreased by 28% and 14%, respectively. Moreover, the PVA/MP composites could reach LOI value up to 35% and UL94 classification V‐0, showing good flame retardancy. At the same time, both Fourier transform infrared and X‐ray photoelectron spectroscopy spectra of the residual chars from the PVA/MP composites demonstrated that the catalytic effect of MP on the dehydration and decarboxylation reactions of PVA, and the chemical reactivity of MP during the chars‐forming reactions could be used to account for the changed thermal stability and flame retardancy of the PVA/MP composites. Copyright © 2012 John Wiley & Sons, Ltd.