Preparation of nanometer MgO by sol-gel auto-combustion

Nanometer MgO was prepared via a sol-gel auto-combustion technique using magnesium nitrate as raw material and citric acid as chelating agent. IR spectra of the dried gel were used to investigate the structure of the precursors. By studying the different TG curves of magnesium citrate gel prepared by different methods, we found that a combustion process occurred and the nitrate ions acted as an oxidant in the combustion process. TEM photographs of synthesized powders from the sol-gel auto-combustion showed that the crystallites were uniform in size. In addition, the XRD pattern of this sample showed that the particle size was 8.9 nm. The BET curves, in turn, showed that the specific surface of the sample was 26.34 m²/g. The mechanism of the frothing process in restraining agglomeration is discussed. __________ Translated from Journal of East China Normal University (Natural Science), 2007, (2): 52–57 [译自: 华东师范大学学报(自然科学版)]     

氧化锶催化性质：Ⅱ.SrO,MgO上异丙醇的分解反应

ＳｒＯ，ＭｓＯ对异丙醇的分解反应有各自的作用形式，因而产物分布也有明显差别．ＭｇＯ上异丙醇分解，在较低温度时，主要产物为丙酮和丙烯；随温度升高，生成丙烯的量增加，而丙酮的量减少，直至消失，在ＳｒＯ上，异丙醇在较高温度时反应，产物几乎为丙酮，丙烯的生成量极少。认为：产物中丙烯来源于异丙醇在催化剂表面强酸中心上的脱水；丙酮在ＭｇＯ上来源于强碱中心和酸中心协同作用异丙醇的脱氢，而在ＳｒＯ上则是ＳｒＯ表面极强的碱中心作用异丙醇而脱氢制得。     

用原位红外光谱研究氧化镁上甲醛与乙醛合成双季戊四醇反应的机理

 以甲醛和乙醛为原料，研究了在碱性催化剂存在下合成双季戊四醇反应的机理和工艺．结果表明，与液体碱NaOH的碱催化作用相比，固体碱MgO上的产物季戊四醇、双季戊四醇和三季戊四醇在收率方面水平相当．用原位红外光谱研究了在MgO上甲醛和乙醛各自的吸附物种及甲醛－乙醛混合物的吸附物种，考察了这些吸附物种随温度的变化．结果发现，吸附作用削弱了甲醛和乙醛分子中的C＝O双键；甲醛与乙醛原位反应后表明有α，β不饱和醛吸附物种生成，说明由甲醛与乙醛合成双季戊四醇的反应经历了丙烯醛中间物．     

Ultra-stable Ni catalysts for methane reforming by carbon dioxide

Methane reforming by carbon dioxide has been studied over ultra-stable Ni catalysts. The catalyst was characterized by XRD, IR and TEM and temperature programmed hydrogenation. The nickel–magnesia solid solution catalyst containing low nickel has shown excellent stability (>3000 h) and no carbon deposition in the methane reforming by carbon dioxide. It was also found that the small nickel metal particle interaction with support surface is effective for the inhibition of carbon formation.     

Thermal characterization of portland cement-magnesia blends

Summary Due to growing environmental concerns and the need to use less energy-intensive building products, alternatives and improvements to Portland cement (PC) are being actively researched worldwide. Use of supplementary materials is now a common practice where PC is the predominant component of inorganic building products. This study aims to investigate the potential of magnesia (MgO), derived from a naturally occurring raw material magnesite, as a supplementary material. Results from mortar samples prepared with 10 and 20% replacements of ordinary Portland cement (OPC) by MgO are presented. DTA-TG was used to study and characterise the hydration behaviour of MgO in OPC environment after 3, 7, 14, 28, 56 and 90 days of moist curing. Microstructural and compressive strength determinations providing additional information on the influence of hydrated phases are also reported.     

Iron-Iridium Mixed-Metal Carbonyl Clusters: A Mössbauer Study of the Structure and of the Adsorption of [Fe2Ir2(CO)12]2− on MgO

¹⁹³Ir and ⁵⁷Fe Mössbauer spectroscopy was used to investigate the structure of the [Fe₂Ir₂(CO)₁₂]^2- cluster compound and the adsorption of this cluster on hydrated MgO. Supported samples were prepared by impregnation of the magnesia with solutions of [Et₄N]₂[Fe₂Ir₂(CO)₁₂] in acetone. The Mössbauer and FT-IR spectra of the MgO-supported cluster confirm that the bimetallic carbonyl is molecularly physisorbed onto MgO without undergoing any transformation or decomposition. The easy solvent extraction of the intact cluster from the oxide surface excludes ion pairing between the cluster anion and the Mg²⁺ surface sites. Mössbauer spectra are in agreement with the refined structure of the molecular cluster and the temperature dependence of the ⁵⁷Fe Mössbauer spectra above 80 K is consistent with the low degree of interaction of the cluster with the support. This technique, therefore, appears to be promising in order to infer structural information when X-ray determination fails.     

微波法研制碱土金属氧化物负载型MCM-48碱性介孔材料

以立方相介孔分子筛MCM-48为载体,用微波辐射分散MgO或CaO和醋酸镁溶液浸渍等方法研制碱性介孔材料。MCM-48能经受微波辐射,负载碱性客体之后也保持介相结构。异丙醇分解探针反应表明:载体本身没有碱催化活性,而碱性MCM-48介孔材料的活性随温度升高而提高。本文还对介孔材料在微波分散和碱性催化方面的特点进行分析。     

连铸中间包镁质工作衬板的研制与应用

针对目前钢铁企业所用硅质绝热板和碱性涂料存在的不足，研究开发了中间包镁质工作衬板。主要研究了有机纤维、有机发泡剂、蓝晶石以及结合剂对连铸中间包镁质工作衬板性能的影响。所研制的连铸中间包镁质工作衬板性能优良，实际使用效果良好。     

MgO/Si3N4复合材料表面致密层的形成机理

研究发现MgO/Si3N4复合材料具有自阻碍氧化的性能,氧化时其表面能自发生成一层阻碍进一步氧化和提高抗侵蚀的致密层,添加Al,Si可以加厚、加宽致密层.在此基础上,研究了无添加剂和添加Al,Si的致密层的形成机理、组成和结构.提出转换氧分压为衡量气态氧化物SiO和Al2O的逸出标准,并确定气态的SiO或Al2O可以在氧化层内部生成以及由于它们在表面的再氧化和反应使表层内形成了致密层的机理.     

Performance of Co/MgO catalyst for C02 reforming of toluene as a model compound of tar derived from biomass gasification

Catalytic performances of the CO2 reforming of toluene on Co/MgO catalysts with different cobalt loadings were evaluated in a fluidized-bed reactor. The results showed that the conversion of toluene and the stability of Co/MgO increased, but the apparent reaction rate decreased at the initial stage with increasing the amount of metallic Co formed from the reduction of Co/MgO catalysts at 700 ~C. The deactivation of Co/MgO catalysts was mainly resulted from that a part of the metallic Co was oxidized by CO2 and could not be re-reduced by H2 at reaction temperature. Therefore, the excess metallic Co on the higher Co loading catalysts was beneficial to the catalyst stability.