Polymer 4D printing: Advanced shape-change and beyond

4D printing is an exciting branch of additive manufacturing. It relies on established 3D printing techniques to fabricate objects in much the same way. However, structures which fall into the 4D printed category have the ability to change with time, hence the “extra dimension.” The common perception of 4D printed objects is that of macroscopic single-material structures limited to point-to-point shape change only, in response to either heat or water. However, in the area of polymer 4D printing, recent advancements challenge this understanding. A host of new polymeric materials have been designed which display a variety of wonderful effects brought about by unconventional stimuli, and advanced additive manufacturing techniques have been developed to accommodate them. As a result, the horizons of polymer 4D printing have been broadened beyond what was initially thought possible. In this review, we showcase the many studies which evolve the very definition of polymer 4D printing, and reveal emerging areas of research integral to its advancement.     

Hyperparameter on-line learning of stochastic resonance based threshold networks

Aiming at training the feed-forward threshold neural network consisting of nondifferentiable activation functions, the approach of noise injection forms a stochastic resonance based threshold network that can be optimized by various gradient-based optimizers. The introduction of injected noise extends the noise level into the parameter space of the designed threshold network, but leads to a highly non-convex optimization landscape of the loss function. Thus, the hyperparameter on-line learning procedure with respective to network weights and noise levels becomes of challenge. It is shown that the Adam optimizer, as an adaptive variant of stochastic gradient descent, manifests its superior learning ability in training the stochastic resonance based threshold network effectively. Experimental results demonstrate the significant improvement of performance of the designed threshold network trained by the Adam optimizer for function approximation and image classification.     

考虑多种损坏构成特征的沥青路面预防性养护决策方法

由于沥青路面损坏构成的多样性, 相同的路面状况指数(pavement condition index, PCI)可能代表不同的损坏组合. 当多种损坏并存且损坏程度接近时, 用PCI和主导损坏(最严重、扣分最多的路面损坏)难以得到具有针对性的养护对策. 因此, 通过对PCI的深入分析, 明确了主导损坏代表性不足的路段, 以现行预防性养护决策方法为基础, 补充了一种考虑损坏构成特征、更具针对性的决策方法. 以上海城市道路近5年的检测、养护数据为分析基础, 首先利用有序聚类算法将路段按PCI水平分组, 分析了不同阶段路面损坏构成和差异水平; 然后, 针对多种损坏并存且损坏差异不显著的路段, 根据预防性养护的实施效果筛选了能够反映正确预防性养护经验的有效养护路段; 最后, 基于有效养护路段建立并对比分析了2个基于BP(back propagation)神经网络的养护决策模型. 结果表明: 当PCI水平介于优良(84.4~93.0分)时, 不同损坏程度接近, 主导损坏代表性不足; 考虑多种损坏构成特征的BP神经网络模型表现出更高的决策精度, 测试集决策正确率达86.20%, 优于仅考虑主导损坏的模型(58.50%). BP神经网络与传统决策树法结合能够优化沥青路面决策过程, 提高养护对策选取的针对性.     

Pattern transition and regulation in a subthalamopallidal network under electromagnetic effect

Although the significant roles of magnetic induction and electromagnetic radiation in the neural system have been widely studied, their influence on Parkinson's disease (PD) has yet to be well explored. By virtue of the magnetic flux variable, this paper studies the transition of firing patterns induced by magnetic induction and the regulation effect of external magnetic radiation on the firing activities of the subthalamopallidal network in basal ganglia. We find: (i) The network reproduces five typical waveforms corresponding to the severity of symptoms: weak cluster, episodic, continuous cluster, episodic, and continuous wave. (ii) Magnetic induction is a double-edged sword for the treatment of PD. Although the increase of magnetic coefficient may lead the physiological firing activity to transfer to pathological firing activity, it also can regulate the pathological intensity firing activity with excessive β-band power transferring to the physiological firing pattern with weak β-band power. (iii) External magnetic radiation could inhibit continuous tremulous firing and β-band power of subthalamic nucleus (STN), which means the severity of symptoms weakened. Especially, the bi-parameter plane of the regulation region shows that a short pulse period of magnetic radiation and a medium level of pulse percentage can well regulate pathological oscillation. This work helps to understand the firing activity of the subthalamopallidal network under electromagnetic effect. It may also provide insights into the mechanisms behind the electromagnetic therapy of PD-related firing activity.     

超高功率超短脉冲发展的现状及相关科学问题

超高功率超短脉冲激光系统在其聚焦焦点附近可以实现高达1022-24 W/cm2的峰值功率输出,为强场物理实验研究,以及实验室内模拟极端环境下的天体物理条件提供了直接的实现方案.自从国际上首次提出了建造EW激光的概念,即输出总功率达到1018 W的大型激光系统后,国际上很多国家都在设计和建造大规模的超高功率超短脉冲激光系统.本文简要介绍了国际上这种规模激光系统的发展状况,并结合国内超高功率高能超短脉冲激光的发展,对超高功率超短脉冲激光系统发展中相关技术问题进行阐述.     

SQL注入攻击与防范实验的设计与实现

介绍了SQL注入的原理、攻击和防范技术,并通过设计具体实验方案演示了SQL注入攻击与防范的全过程及细节。通过搭建存在SQL注入漏洞的Web网站并对其进行SQL注入攻击,观察被攻击的效果,进行漏洞修复。对漏洞修复后的系统进行攻击,并对比修复漏洞前后的现象,以此得出SQL注入漏洞的原理、产生原因、对应攻击原理及如何防范漏洞,加深对SQL注入的理解。     

民族高校工商管理专业实践教学体系创新研究

围绕工商管理专业培养具有较强实践能力和高素质管理人才的目标,分析当前实践教学中的误区,通过构建全社会参与的工商管理专业人才实践教学社会网络,建立贯穿大学四年学习全周期的五大实践教学培养体系,对工商管理专业学生进行基础素养实践能力和专业素养实践能力培养,探索工商管理专业人才实践能力培养模式和体系。     

3D‐morphology reconstruction of nanoscale phase‐separation in polymer memory blends

In many organic electronic devices functionality is achieved by blending two or more materials, typically polymers or molecules, with distinctly different optical or electrical properties in a single film. The local scale morphology of such blends is vital for the device performance. Here, a simple approach to study the full 3D morphology of phase‐separated blends, taking advantage of the possibility to selectively dissolve the different components is introduced. This method is applied in combination with AFM to investigate a blend of a semiconducting and ferroelectric polymer typically used as active layer in organic ferroelectric resistive switches. It is found that the blend consists of a ferroelectric matrix with three types of embedded semiconductor domains and a thin wetting layer at the bottom electrode. Statistical analysis of the obtained images excludes the presence of a fourth type of domains. The criteria for the applicability of the presented technique are discussed. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1231–1237     

多纤芯弹性光网络中虚拟网络映射模型及算法

为解决多纤芯弹性光网络虚拟化中的虚拟结点映射、链路映射和频谱分配问题,首先建立了一个以最小化占用的频谱数及最小化最大占用频隙号为目标的全局约束优化模型.其次,设计了具有高效的交叉、变异及不可行解可行化算子的全局优化遗传算法,以有效求解该模型得到最优的虚拟节点、链路映射方案.最后,为验证算法的有效性进行了不同的仿真实验.结果表明,所设计的算法能够有效地减小网络中占用的频谱数和最大占用频隙号.     

植入式硅神经微电极的发展

 神经科学和神经工程研究需要研究大脑神经元的电活动情况，以了解大脑产生、传输和处理信息的机制。植入式神经微电极作为一种传感器件，是时间分辨率最高的神经电活动传感手段之一。介绍了国内外几种主要的植入式硅基神经微电极的结构特点、制备方法和性能特点。分析表明，未来通过不断结构优化和改性修饰，特别是在高通量的神经记录方面，通过与同样基于硅材料的电路的集成，硅神经微电极能够进一步提高生物相容性，解决大规模的电极通道体内外传输与连接问题，实现对神经元的在体大规模长时间记录。