疏松砂岩油藏大孔道定性识别新方法研究

疏松砂岩油藏在长期注水开发过程中,往往伴随着大孔道的出现,这严重影响了油藏水驱开发效果,制约了采出程度的进一步提高,因此,大孔道识别及有效封堵成为该类油藏急需解决的关键问题.通过研究分析,确定了影响大孔道从形成到发展的7种主要静态因素,以及标志大孔道形成的6种主要动态因素.将层次分析法及灰色关联法相结合,分别计算静态及动态因素的权重,建立了全新的大孔道定性识别模型.示踪剂监测结果验证了该方法的实用性和有效性.     

基于电化学老化衰退模型的锂离子动力电池外特性

当前锂离子动力电池电化学模型存在模型复杂、建模难度大、计算效率低、老化评估效果差的问题,本文提出一种考虑电池衰退老化的机理模型(ADME).本文首先通过有限差分法对伪二维(P2D)电化学模型进行离散降阶处理,得到简化伪二维(SP2D)模型.在SP2D模型的基础上,基于阴阳两极发生的副反应导致的衰退老化现象,提出一种考虑电池衰退老化的机理模型.其次,使用多变量偏差补偿最小二乘法实现模型参数辨识.最后通过动力电池衰退老化性能循环实验,对比分析了恒流、脉冲工况下SP2D模型和ADME模型的终端电压输出.结果表明:ADME模型较为简单、计算效率和估算精度高,可以有效评估电池容量老化衰退,得到理想的锂离子动力电池外特性曲线.     

Studies on metabolism of total glucosides of paeony from Paeoniae Radix Alba in rats by UPLC‐Q‐TOF‐MS/MS

Total glucosides of paeony are the active constituents of Paeoniae Radix Alba. In this study, a novel strategy was proposed to find more metabolites and the differences between paeoniflorin, albiflorin and total glucosides of paeony (TGP). This strategy was characterized as follows: firstly, the animals were divided into three groups (paeoniflorin, albiflorin and TGP) to identify the source of TGP metabolites from paeoniflorin or albiflorin; secondly, a generic information‐dependent acquisition scan for the low‐level metabolites was triggered by the multiple mass defect filter and dynamic background subtraction; thirdly, the metabolites were identified with a combination of data‐processing methods including mass defect filtering, neutral loss filtering and product ion filtering; finally, a comparative study was used in the metabolism of paeoniflorin, albiflorin and TGP. Based on the strategy, 18 metabolites of TGP, 10 metabolites of paeoniflorin and 13 metabolites of albiflorin were identified respectively. The results indicated that the hydrolysis, conjugation reaction and oxidization were the major metabolic pathways, and the metabolic sites were the glycosidic linkage, the ester bond and the benzene ring. This study is first to explore the metabolism of TGP, and these findings enhance our understanding of the metabolism and the interactions of paeoniflrin and albiflorin in TGP. Copyright © 2015 John Wiley & Sons, Ltd.     

集成有源负载放大器的研究

本文重点介绍了集成有源负载放大器的分析方法,并以镜像电流源为例详细介绍、对比了两种方法(图解分析法和微变等效电路分析法)。此外,介绍了用厄雷电压计算 Av 的简便方法。     

数字调制方式的识别研究

数字调制方式的识别对于通信信号分析有着重要的作用 .此文首先介绍了数字调制方式的识别算法(DMRA) ,即判决理论算法的原理 ;然后提出了一种基于该算法的判决流程 ;最后在软件环境中进行计算机仿真 ,通过实验数据对该算法进行修正 .仿真结果表明 ,该修正算法具有较高的识别率和良好的可行性 .     

噬菌体展示禽流感病毒抗原变异性基因片段文库的构建

构建T7噬菌体展示禽流感病毒抗原变异性基因片段文库. 首先， 从Gene Bank中查找筛选禽流感病毒抗原变异性基因, 将其截短、 修饰、 简并后得到禽流感病毒抗原变异性基因微阵列. 其次， 将合成的禽流感病毒抗原变异性基因片段文库扩增、 酶切, 链接到双酶切后的T7噬菌体载体基因上, 构成重组噬菌体DNA. 最后， 重组噬菌体DNA经体外包装和扩增, 得到T7噬菌体展示文库, 并进行T7噬菌体展示文库滴度、 重组率和免疫活性测定. 实验结果表明, 从Gene Bank中查找、 筛选、 剪切和修饰共获得96 258条序列构建T7噬菌体展示文库, 原始文库滴度为3.6×107个菌落/mL, 重组率大于90%. 用禽流感病毒H5N1抗体进行捕获, 经聚合酶链式反应(PCR)鉴定, 得到理想目的条带, 证明噬菌体表面展示蛋白具有抗原活性, 可用于禽流感病毒感染患者的快速检测及抗原表位筛选.     

Variational Derivative for Buckling Loads of Beams and Frames

The finite-difference method is a numerical technique for obtaining approximate solutions to differential equations. The main objective of the present study is to give a new aspect to the finite-difference method by using a variational derivative. By applying this formulation, accurate values of the buckling loads of beams and frames with various end supports are obtained. The performance of this formulation is verified by comparison with numerical examples in the literature __________ Published in Prikladnaya Mekhanika, Vol. 41, No. 7, pp. 139–144, July 2005.     

三维光盘存储系统中双光头同步控制的频域分析与辨识

详细介绍了双光头同步控制原理.对采集的伺服模块聚焦误差跟踪信号及共焦模块读写光头的聚焦线圈驱动信号进行了频域分析,并以此两路信号作为系统输入输出,分别对三种参数模型进行参数优化.根据3种模型的频率响应及阶跃响应,选择双光头同步控制过程的参数模型为[450]阶的ARX模型.实测曲线与模型仿真结果符合度(fit)为78.0259%.     

Stability and Nonlinear Deformation of Cylindrical Grids

The general stability of single-layer cylindrical grids is studied in linear and nonlinear formulations. Dependence of the general buckling load on the geometry and stiffness parameters of a grid is established in an analytical form. Such grids are numerically analyzed for stability. It is established that the general buckling load is much less than the local buckling load. Typical general buckling modes are found. It is shown that such grids are weakly sensitive to imperfections     

几何相似体应力-应变分布相同时的载荷关系

为了保证几何相似模型与原件具有完全相同的应力-应变分布,必须对几何相似模型施加与实际构件成对应比例的各种载荷,因此需要寻求几何相似模型在应力-应变分布完全相同时各种外加载荷的比例关系。从相似理论入手,以2端固支的矩形梁下表面边线中点的应力解析表达式为基础进行推导,得出相应的理论载荷关系,并用算例在弹塑性状态下验证了所得关系的正确性。得到的结论是:对于2个几何相似构件,若几何相似系数为kl,则当外加集中载荷的载荷系数为kl、均布线载荷的载荷系数为kl、均布面载荷的载荷系数为1时,2构件的应力-应变分布完全相同。