螺栓连接大变形梁非线性振动特性的实验研究

柔性机械臂、大型可展开天线等机械结构的动作精度受运动过程中大变形几何非线性和连接处接触非线性的影响十分显著。以含螺栓连接结构的大变形梁作为研究对象，针对动力学建模和振动特性开展了实验研究，通过数值计算验证了实验发现的非线性振动特性。搭建了含螺栓连接柔性大变形梁的实验台架，开展了敲击和正弦激振的实验测试。实验结果表明，螺栓连接的柔性梁较连续梁的（无螺栓连接）模态频率降低，阻尼增加，反映出随着激励能量增大，模态频率降低的非线性模态特征。改变螺栓连接位置会显著影响结构的模态频率，其变化规律可由求解线性矩阵特征值定性反映。     

基于多环返工串行生产线的性能优化建模

为评价和优化串行多环返工生产系统的生产性能表现，结合质量管理与精益生产的理念，区别于传统的返工机制，提出一种全新的“即刻返工”检查机制，将生产系统建模扩展至多机多缓冲区的复杂生产系统.基于生产系统的两大要素，机器与缓冲区的生产状态变化，依据概率论与马氏定理，构建缓冲水平的动态概率转移矩阵，以在制品库存水平及系统平均生产率作为研究指标，针对生产设备及缓冲区展开瞬态分析，通过迭代计算，表明设置合理的系统规模与缓冲区阈值能达到优化系统生产性能的目的，并通过数值实验验证其有效性.     

非锚固式大型立式热质储罐强度分析

针对大型储罐在多种载荷作用下易发生强度破坏的问题，以某热质储罐为研究对象，利用有限元法分析热质储罐在自重、内压、液柱静压力、风载荷、地震载荷、雪载荷以及温度载荷作用下的应力强度以及变形，模拟大角焊缝区域翘曲情况，并依照JB4732—1995进行强度评定，为此类大型立式储罐的设计提供参考。     

Nano-sized Cu(II) and Zn(II) complexes and their use as a precursor for synthesis of CuO and ZnO nanoparticles: A study on their sonochemical synthesis,characterization, and DNA-binding/cleavage,anticancer, and antimicrobial activities

Two new divalent copper (C1) and zinc (C2) chelates having the formulae [M(PIMC)₂] (where M = Cu(II), Zn(II) and PIMC = Ligand [(E)-3-(((3-hydroxypyridin-2-yl)imino)methyl)-4H-chromen-4-one] were obtained and characterized by several techniques. Structures and geometries of the synthesized complexes were judged based on the results of alternative analytical and spectral tools supporting the proposed formulae. IR spectral data confirmed the coordination of the ligands to the copper and zinc centers as monobasic tridentate in the enol form. Thermal analysis, UV-Vis spectra and magnetic moment confirmed the geometry around the copper center to be tetrahedral, square pyramidal and octahedral. Study of the binding ability of the synthesized compounds with Circulating tumor DNA (CT-DNA) bas been evaluated applying UV-Vis spectral titration and viscosity measurements. The copper and zinc oxides were achieved from the copper and zinc nano-particles structures Schiff base complexes as the raw material after calcination for 5 hr at 600°C. On the other hand, synthesized of C1 and C2 NPs were used as suitable precursors to the preparation of CuO and ZnO NPs. Finally, the synthesized of the two complexes exhibited enhanced activity against the tested bacterial (Staphylococcus aureus and Escherichia Coli) and fungal strains (Candida albicans and Aspergillus fumigatus) as compared to HPIMC. Among all these synthesized compounds, C1 exhibits good cleaving ability compared to other newly synthesized C2.     

Design and development of a two‐dimensional system based on hydrophilic and reversed‐phase liquid chromatography with on‐line sample treatment for the simultaneous separation of excreted xenobiotics and endogenous metabolites in urine

In the present work we describe a two‐dimensional liquid chromatographic system (2D‐LC) with detection by mass spectrometry (MS) for the simultaneous separation of endogenous metabolites of clinical interest and excreted xenobiotics deriving from exposure to toxic compounds. The 2D‐LC system involves two orthogonal chromatographic modes, hydrophilic interaction liquid chromatography (HILIC) to separate polar endogenous metabolites and reversed‐phase (RP) chromatography to separate excreted xenobiotics of low and intermediate polarity. Additionally, the present proposal has the novelty of incorporating an on‐line sample treatment based on the use of restricted access materials (RAMs), which permits the direct injection of urine samples into the system. The work is focused on the instrumental coupling, studying all possible options and attempting to circumvent the problems of solvent incompatibility between the RAM device and the two chromatographic columns, HILIC and RP. The instrumental configuration developed, RAM‐HILIC‐RPLC‐MS/MS, allows the simultaneous assessment of urinary metabolites of clinical interest and excreted compounds derived from exposure to toxic agents with minimal sample manipulation. Thus, it may be of interest in areas such as occupational and environmental toxicology in order to explore the possible relationship between the two types of compounds. Copyright © 2015 John Wiley & Sons, Ltd.     

利用反预报方法从截面预言近滴线丰质子核的结合能

在Origin等数据处理软件中,当实验数据较少时,自由参数的不同初始化设置会导致较大的结果差异,这为物理结果的确定带来较大不确定性.通过最小二乘法分析了345MeV/u ~(78) Kr+~9Be反应中产生的丰质子同位素的截面和结合能,并得到线性回归方程.通过回归方程,利用结合能预报部分丰质子核素的截面,以及通过实验截面对近质子滴线核素的结合能进行反预报测量.这对于近质子滴线的丰质子核素实验测量具有较好的借鉴意义.     

湍流大小尺度涡量方程组及其封闭

利用流体大小尺度 (LSS)方程组推导出湍流大小尺度涡量 (LSSV)方程组 ,给出两个关于湍流大小尺度涡量的命题 ,从而得到湍流封闭大小尺度涡量 (CLSSV)方程组。同时 ,对近程相互作用命题进行了推广。     

中线在不对称负载作Y连接时的作用

通过实验分析和理论计算,从两个方面说明中线在不对称负载作星形连接时的作用.     

APCI5000电气自动化成套装置设计

电气自动化成套装置种类繁多，并广泛应用于电力系统．结合现场实际商业运行期所积累的经验，并根据市场预测以及目前工控机发展动态，提出了采用APCI5000工业控制计算机实现电气自动化成套装置设计的最佳方案．     

Hamilton线图中的泛圈性

对于图Ｇ的边ｅ＝ｕｖ，定义ｄ（ｅ）－ｄ（ｕ）＋ｄ（ｖ），这里ｄ（ｕ）和ｄ（ｖ）分分别表示ｕ和ｖ的度，该文的主要结果是：对阶为ｎ（ｎ≥４０）的简单连通图Ｇ，如果对Ｇ中任意两条边距离为２的边ｅ１，ｅ２都有ｄ（ｅ１）＋ｄ（ｅ２）≥ｎ，并且线图Ｌ（Ｇ）是Ｈａｍｉｌｔｏｎ的，则Ｌ（Ｇ）是泛圈的，并且条件Ｌ（Ｇ）是Ｈａｍｉｌｔｏｎ是必要的。