Overloaded elution band profiles of ionizable compounds in reversed‐phase liquid chromatography: Influence of the competition between the neutral and the ionic species

The parameters that affect the shape of the band profiles of acido‐basic compounds under moderately overloaded conditions (sample size less than 500 nmol for a conventional column) in RPLC are discussed. Only analytes that have a single pK_a are considered. In the buffer mobile phase used for their elution, their dissociation may, under certain conditions, cause a significant pH perturbation during the passage of the band. Two consecutive injections (3.3 and 10 μL) of each one of three sample solutions (0.5, 5, and 50 mM) of ten compounds were injected on five C₁₈‐bonded packing materials, including the 5 μm Xterra‐C₁₈ (121 Å), 5 μm Gemini‐C₁₈ (110 Å), 5 μm Luna‐C₁₈(2) (93 Å), 3.5 μm Extend‐C₁₈ (80 Å), and 2.7 μm Halo‐C₁₈ (90 Å). The mobile phase was an aqueous solution of methanol buffered at a constant _W^WpH of 6, with a phosphate buffer. The total concentration of the phosphate groups was constant at 50 mM. The methanol concentration was adjusted to keep all the retention factors between 1 and 10. The compounds injected were phenol, caffeine, 3‐phenyl 1‐propanol, 2‐phenyl butyric acid, amphetamine, aniline, benzylamine, p‐toluidine, procainamidium chloride, and propranololium chloride. Depending on the relative values of the analyte pK_a and the buffer solution pH, these analytes elute as the neutral, the cationic, or the anionic species. The influence of structural parameters such as the charge, the size, and the hydrophobicity of the analytes on the shape of its overloaded band profile is discussed. Simple but general rules predict these shapes. An original adsorption model is proposed that accounts for the unusual peak shapes observed when the analyte is partially dissociated in the buffer solution during its elution.     

Human insulin and desamido human insulin isotherms in ethanol-water reversed phase systems

The multi-component isotherms for human insulin (HI) and desamido human insulin (dHI) over reversed phase packing (C18) and with 29.8% (w/w) ethanol-water as mobile phase have been determined experimentally. The isotherms of HI in ethanol-water differ from those obtained with the more commonly applied methanol-water and acetonitrile-water mobile phase, as described in this paper. The isotherm exhibits anti Langmuirian behavior and can be very well modeled by an anti Langmuir isotherm presented in this paper. The HI and dHI anti Langmuir isotherm are determined as: qHI = (8.4C(HI) + 3C(HI)CdHI)/(1 - 0.05C(HI) - 0.14CdHI + 0.04C(HI)CdHI) and qdHI = (11.4CdHI + 2C(HI)CdHI)/ (1 - 0.05C(HI) - 0.14CdHI + 0.04C(HI)CdHI)     

Changes in the physicochemical properties of transferrin upon chemical derivatization with ceramides

The interaction of native and derivatized transferrin with lecithin, cholesterol and their mixtures was studied using monomolecular layers of phospholipids. Moreover, the thermodynamic parameters corresponding to these interactions: the mixing excess free energy, interaction energy, and interaction parameter were also calculated.The ability of these two proteins to insert into monolayers was studied working at constant area.The formation of aggregates or secondary structures in solution was determined by the fluorescence and polarization values of ANS (anilinonaphthalene sulfonate), measured at different protein/ANS relationships.Abbreviations TF Transferrin - DTF derivatized transferrin - PC lecithin - CHOL cholesterol - CER ceramides - ANS anilinonaphthalene sulfonate - TNBS trinitro benzenesulfonate method     

通过密度函数理论表征炭质吸附剂的孔径分布

通过密度函数理论（DFT-DensityFunctionalTheory）对炭质吸附剂的孔径分布进行了表征。该法以多孔固体上N2吸附分子模型为依据，用一种方法对多孔固体的孔径分布从微孔到大孔范围进行确定。本文用该法对自制的聚丙烯腈活性炭纤维、国产煤质活性炭及日本产活性炭微球等六种炭质吸附剂的孔径分布进行了表征。     

Concentration profiles and breakthrough curves in non-linear chromatography

The treatment of the non-linear isotherm in chromatography by one of the authors [1] is extended to other cases of practical interest. The original paper dealt with the case of an initially thin zone resulting in a Poisson distribution the asymmetry of which is a function of the plate number and the non-linearity constant. The present work shows that the same relations apply to initially thick zones and to the cases of washing and deposition leading to simple relations for breakthrough curves. For significantly non-linear isotherms other quasi-Gaussian distributions can give a better fit.     

Analysis of the Micropore Structure of Various Microporous Materials from Nitrogen Adsorption at 77 K

The micropore structure of four microporous materials (two zeolites, ZSM-5 and Y-82; an activated carbon and an alumina pillared clay) and their binary physical mixtures (50-50 wt%) have been examined by nitrogen adsorption at 77 K. Various micropore sizes have been considered from the stages on the micropore filling mechanism in the microporous materials. The application of the Dubinin-Astakhov (DA) equation to characterize and obtain the adsorption potential distributions of the microporous materials is presented.     

Behaviour of organic pollutants in paper and board samples intended to be in contact with food

This paper deals with the study of volatile compounds present in a set of three paper and board (P&B) samples of different composition, surface treatment, grammage and thickness. The volatile compounds released by the packaging material (P&B) can be trapped on the food and may then affect the safety and health of consumers. To evaluate if the recycled P&B could be used as food packaging material, adsorption studies have been performed with a selection of chemical substances. The adsorption isotherms are provided. Partition coefficients between paper and air have been calculated for a series of volatile compounds used as model compounds to represent different families of contaminants commonly present in P&B. Values from 4 to 3243 were obtained at different temperatures. The analysis of volatile compounds have been carried out by automatic headspace coupled on-line with GC/MS in SIM mode. The results obtained are shown and discussed.     

Modification of solids with volatile organics III: Natural zeolites

Summary The effect of pre-adsorbed benzene and ethanol on the adsorptive properties of natural zeolite (clinoptilolite) has been studied by gas-solid chromatography. It has been shown that modification of the solid surface by volatile organics has a significant influence on the adsorptive properties. The modification is of the same order as the more difficult modification by inorganics, as illustrated here by clinoptilolite modification with Co²⁺. Energy distribution of surface adsorptive sites appears to be continuous and confirms previous finding that only a small proportion of active sites is responsible for most adsorbate retention. Part II reference [4]     

气固吸附等温线的研究进展

综述了近些年来在气固吸附理论研究领域对吸附等温线的研究进展。论述了从早期的BDDT的5种类型吸附等温线，到IUPAC的6种类型吸附等温线，再到基于Ono-kondo晶格模型的Gibbs吸附分类的5种类型吸附等温线．讨论了与各种类型吸附等温线类型相对应的吸附机理，并对滞留回环现象进行了解释和分析。