Fundamental processes in long air gap discharges

The development of atmospheric lightning is initiated and sustained by the formation in virgin air of ‘streamer corona’ and ‘leader’ discharges, very similar to those observed in laboratory long sparks. Therefore, the experimental and theoretical investigations of these laboratory discharges have become of large interest to improve the physical knowledge of the lightning process and to develop self-consistent models that could be applied to new protection concepts.In the present paper the fundamental processes of the subsequent phases of long air gap discharges are analyzed, from the first corona inception and development to the leader channel formation and propagation. For all these processes simulations models are discussed that have been essentially derived and simplified by the authors, in order to develop sequential time-dependent simulation of the laboratory breakdown, with both positive and negative voltages. The possibility of extending these models to the case of natural lightning is discussed in the companion paper, presented in this same volume. To cite this article: I. Gallimberti et al., C. R. Physique 3 (2002) 1335–1359.     

金钢石的制备研究

本文研究了两种不同质异构体石墨—金刚石的转化条件，以及在实验室现有条件下，利用石墨材料制备金刚石颗粒的具体方法和试验结果。     

CNC系统中任意三维椭圆弧的高速插补新方法

本文根据两步递归插补的思想,导出了任意三维椭圆弧高速插补的公式和算法.它是空间圆弧高速插补方法在三维椭圆弧的情况下进一步推广应用.本文最后还对插补算法进行了稳定性分析和误差分析.     

利用弧形光栅尺测量大型转轴扭矩的原理研究

利用弧形光栅尺的旋转微位移测量功能,组建一组测量体系,用于测量巨型转轴的扭矩。采用四组相同的弧形光栅尺同时测量两截面的相对转角,通过多点测量实现误差均化,得出了消除转轴直径对测量影响的公式,使仪器的环境适应能力得到了极大地提高。根据不同的工作情况,提出了相应的动态测量扭矩的计算方程。实现了大型机械设备主传动的动力监测,为设备自动化、智能化奠定了基础。     

舟山朱家尖岛的海滨底栖无脊椎动物

根据1986～1987年逐月调查和1987年以来结合教学实习采集的朱家尖海滨底栖无脊椎动物资料,并参考前人对该岛的调查,叙述了朱家尖岛海滨底栖无脊椎动物10门257种,分析了生活潮区、栖息底质等,提出了该岛潮间带生物资源保护的建议。     

Simulation of Weld Depth in A-TIG Welding with Unified Arc-electrode model

Ｉｔｋｎｏｗｎｔｈａｔｓｍａｌｌａｍｏｕｎｔｓｏｆｆｌｕｘｏｎｔｈｅｓｕｒｆａｃｅｏｆｓｔａｉｎｌｅｓｓｓｔｅｅｌｃａｎｉｎｃｒｅａｓｅｔｈｅｄｅｐｔｈｏｆｗｅｌｄｐｅｎｅ ｔｒａｔｉｏｎｉｎＴＩＧｗｅｌｄｉｎｇｂｙａｆａｃｔｏｒｏｆｔｈｒｅｅ[1] .Ｔｈｉｓｐｒｏｃｅｓｓｉｓｒｅｆｅｒｒｅｄｔｏａｓ”ＡＴＩＧ”ｏｒＴＩＧｗｅｌｄｉｎｇａｃｔｉ ｖａｔｅｄｂｙｆｌｕｘ .Ｔｈｅｒｅｈａｖｅｂｅｅｎｔｈｒｅｅｐｕｂｌｉｓｈｅｄｐｈｙｓ ｉｃａｌｍｅｃｈａｎｉｓｍｓｔｈａｔａｒｅｐｏｓｓｉｂｌｅｃｏｎｔｒｉ…     

空间弧面凸轮数控加工程序的计算机辅助编制

介绍了空间弧面凸轮数控加工的方法和数控加工程序的计算机辅助编程方法 ,并给出了辅助编程后模拟显示结果     

Production of carbon soot with a high content of C60 and C70 fullerenes by electric arc

The effect of the parameters of the electric arc (helium pressure, current and voltage, clearance between electrodes) and of the peculiarities of the setup design (arrangement of electrodes, distance between the arc and the cooling surface, temperature of the soot condensation surface) on the yield of fullerenes has been studied. Conditions for producing soot with a C₆₀ and C₇₀ content up to 43% (toluene extract) have been found.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 805–809, May, 1994.The authors are grateful to N. G. Spitsyna and A. V. Dubovitskii for the determination of the content of C₆₀ and C₇₀ fullerenes in the extract.The work was financially supported by the Russian Foundation for Basic Research (Project 93-03-18705).     

安装误差对正交弧齿锥齿轮副接触区影响的分析

本文从理论上分析了正交弧齿锥齿轮副的各种安装误差对啮合接触区的单独影响和综合影响,建立了安装误差作用下齿面接触区的数学模型,并通过具体实例讨论了各项安装误差对啮合接触区单独影响和综合影响的程度以及综合影响的“叠加效应”和“互补效应”,提出了满足接触要求前提下降低安装要求的措施.     

Polyynes and cyanopolyynes synthesis from the submerged electric arc: about the role played by the electrodes and solvents in polyynes formation

The products of the electric arc between graphite electrodes have been investigated by high performance liquid chromatography-diode-array detector (HPLC-DAD) analysis in various media: distilled water, liquid nitrogen, methanol, ethanol, n-hexane and benzene. In distilled water, hydrogen capped polyynes H-(CC)_n-H were the unique products demonstrating that carbon is supplied by the graphite electrodes while hydrogen is supplied by the solvent plasmalysis (in this case water plasmalysis). Arcing graphite electrodes in liquid nitrogen produces cyanopolyynes: NC-(CC)_n-CN demonstrating that in this case the end groups of the polyyne chains are supplied by molecular nitrogen plasmalysis caused by the electric arc. Graphite arcing in methanol and ethanol produces very clean solutions (by-products negligible or absent) of hydrogen-capped polyynes with C₈H₂ as the main product accounting for more than 70 mol percent of the total polyyne concentration. By replacing graphite electrodes with titanium electrodes in methanol or in ethanol, polyynes are not formed at all; only trace amounts of polycyclic aromatic hydrocarbons (PAHs) were detected. When arcing with graphite electrodes is conducted in n-hexane or in benzene, polyyne formation is accompanied by a significant production of PAH, especially in benzene. These results have been rationalized in terms of carbonization or coking tendency of a given solvent. The effect of using titanium electrodes in place of graphite electrodes has been investigated also in n-hexane and in benzene as well as the effects of very high electric current intensity employed to ignite and sustain the submerged electric arc.