人才吸引力因素与政策工具契合关系研究以河北省为例

人才是第一资源,人才引进培养是经济社会发展的一个关键,近年来我国各地纷纷出台吸引人才的重磅政策.为探求人才政策工具对人才的吸引力情况,在构建人才吸引力因素理论模型基础上,通过对178位人才问卷调查获得人才吸引力关键因素,对河北省163份人才政策文本进行数据挖掘,分析政策工具与人才吸引力因素的契合关系.研究得出创新氛围、人才培训培养、人才激励评价、创新创业支持、人才服务和薪资待遇等方面契合度高,政策效果较佳;工作场所仪器设备条件、配偶子女安置和住房补贴的契合关系为政策不足,应加大政策制定;人才载体和医疗社会保障的契合关系为政策冗余,需加强政策实施.     

斜入射时Salisbury屏电磁参数匹配规律研究

利用电磁波传输理论,研究并推导出了电磁波斜入射时Salisbury屏后向反射率公式,使用三维网格法讨论了各个电磁参数、隔离层厚度、入射波频率等同后向反射率之间的关系.研究结果表明:在2～18GHz范围内,角度后向反射率有很大;在f=16GHz时,μ_(r1)和μ_(r2)取值的增加使得材料的磁损耗和储能能力加强,导致材料有很好的吸收效果;然而ε_(r1)和ε_(r2)取值增加时,由于表面反射效应增强,使得吸波效果下降;在2～18GHz频段内后向反射率均可达到4.5dB以上,能够满足军事和民用的要求.     

幅相一致行波管高频电路CAD研究

 在行波管的设计和装配过程中，各部件的尺寸必须严格控制，高频电路参数的离散对行波管色散特性有极大的影响。使用螺旋导电面模型，模拟计算了高频结构各主要参数离散对色散特性和轴向互作用耦合阻抗的影响。分析计算了夹持杆宽度、翼片高度、螺旋线平均半径、螺距、夹持杆介电常数等离散时对色散特性和轴向互作用耦合阻抗的影响，为新型幅相一致行波管的设计和生产提供了很有价值的参考建议。     

FFT-based algorithms for the string matching with mismatches problem

The string matching with mismatches problem requires finding the Hamming distance between a pattern P of length m and every length m substring of text T with length n. Fischer and Paterson's FFT-based algorithm solves the problem without error in O(σnlogm), where σ is the size of the alphabet Σ [SIAM–AMS Proc. 7 (1973) 113–125]. However, this in the worst case reduces to O(nmlogm). Atallah, Chyzak and Dumas used the idea of randomly mapping the letters of the alphabet to complex roots of unity to estimate the score vector in time O(nlogm) [Algorithmica 29 (2001) 468–486]. We show that the algorithm's score variance can be substantially lowered by using a bijective mapping, and specifically to zero in the case of binary and ternary alphabets. This result is extended via alphabet remappings to deterministically solve the string matching with mismatches problem with a constant factor of 2 improvement over Fischer–Paterson's method.     

Bit-parallel approximate string matching algorithms with transposition

Using bit-parallelism has resulted in fast and practical algorithms for approximate string matching under Levenshtein edit distance, which permits a single edit operation to insert, delete or substitute a character. Depending on the parameters of the search, currently the fastest non-filtering algorithms in practice are the O(km/wn) algorithm of Wu and Manber, the O((k+2)(m−k)/wn) algorithm of Baeza-Yates and Navarro, and the O(m/wn) algorithm of Myers, where m is the pattern length, n is the text length, k is the error threshold and w is the computer word size. In this paper we discuss a uniform way of modifying each of these algorithms to permit also a fourth type of edit operation: transposing two adjacent characters in the pattern. This type of edit distance is also known as Damerau edit distance. In the end we also present an experimental comparison of the resulting algorithms.     

抽指加权宽带扇形叉指声表面波滤波器的等效电路分析

扇形换能器可以看成若干个沿孔径方向划分的均匀孔径换能器电端并联而成，根据梅森(Mason)等效电路模型以及由其延伸的混合场等效电路模型，推导出整个扇形换能器的导纳矩阵和频率响应，其中采用复阻抗模型考虑了叉指电极与自由表面的阻抗不连续的因素。本方法能够模拟指间反射、三次行程、指条寄生阻抗以及外围电路等对器件性能的影响；理论模拟与实验结果吻合。     

Determination of the degree of cure under dynamic and isothermal curing conditions with electrical impedance spectroscopy

This article presents a new methodology for the quantitative determination of the progress of the curing reaction of a thermosetting resin, using the results of electrical impedance spectroscopy. The method is an extension of the use of the imaginary impedance maximum as a reaction progress indicator and is based on the demonstration of a close correlation between the reaction rate, as measured by conventional differential scanning calorimetry, and the rate of change of the value of the imaginary impedance spectrum maximum. Tests on a commercial aerospace epoxy resin under both isothermal and dynamic heating conditions with calorimetry and impedance spectroscopy have demonstrated the validity of the method and set the accuracy limits involved. This technique can be used as a real-time online control tool for thermoset composite manufacturing. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 146–154, 2004     

螺旋线径向挤压变形对其慢波结构冷测特性的影响

 介绍了用MAFIA软件的准周期边界条件计算螺旋线行波管慢波结构的色散和耦合阻抗，以及用ANSYS软件对螺旋线径向挤压变形建模的方法，并对螺旋线受挤压径向变形对其冷测特性的影响进行了详细的分析。结果表明:螺旋线径向挤压变形会导致相速增大，而在通常的变形范围内耦合阻抗也会增加；当变形继续增大时耦合阻抗上升到最大值后开始下降。     

匹配问题实例空间和解空间结构

本文通过研究匹配问题的实例空间，匈牙利算法和解空间三者之间的关系，指出S实例空间的数目与问题复杂度之间的关系既不是充分也不是必要的，而如何对问题的解空间进行合理的分解才能是问题的关键。     

Fold‐2‐covering triangular embeddings

For a graph G and a positive integer m, G_(m) is the graph obtained from G by replacing every vertex by an independent set of size m and every edge by m² edges joining all possible new pairs of ends. If G triangulates a surface, then it is easy to see from Euler's formula that G_(m) can, in principle, triangulate a surface. For m prime and at least 7, it has previously been shown that in fact G_(m) does triangulate a surface, and in fact does so as a “covering with folds” of the original triangulation. For m = 5, this would be a consequence of Tutte's 5‐Flow Conjecture. In this work, we investigate the case m = 2 and describe simple classes of triangulations G for which G₍₂₎ does have a triangulation that covers G “with folds,” as well as providing a simple infinite class of triangulations G of the sphere for which G₍₂₎ does not triangulate any surface. © 2003 Wiley Periodicals, Inc. J Graph Theory 43: 79–92, 2003