海上电泵结蜡井热循环洗井工艺参数优化设计

为探索海上油田电泵举升结蜡井热循环洗井工艺井筒温度场分布规律，综合考虑潜油电机增温、电缆散热、热流体注入量、注入深度、注入温度、结蜡管段传热和海水空气导热的影响，基于热能守恒原理，建立了电泵井结蜡热循环洗井工艺井筒温度场计算模型，分析了热流体注入温度和注入量对混合产出流体的井筒温度分布的影响。研究结果表明，随着注入量的增加混合产出液沿程井筒温度增加，随着注入温度的增加混合产出液沿程井筒温度增加。该方法可有效指导现场措施工艺的实施，达到延长结蜡井的清蜡周期、延缓产液/产油量下降速度的目的。     

Functionalized Silver-Ion-Mediated α-dC/β-dC Hybrid Base Pairs with Exceptional Stability: α-d-5-Iodo-2′-Deoxycytidine and Its Octadiynyl Derivative in Metal DNA

Silver-mediated α-dC–Ag⁺–β-dC hybrid base pairs decorated with 5-iodo- or 5-octadiynyl residues are well accommodated in duplex DNA. A strong T_m increase and favorable thermodynamic data for duplex DNA were observed after addition of silver ions. The phenomenon is particularly obvious when both nucleobases of the base pairs are functionalized. Neither the position of the base pair, nor the type of 5-substituent had a negative influence. On the contrary, functionalization of conventional silver-mediated β-dC–Ag⁺–β-dC homo base pairs showed a negative impact induced by the bulky substituents. To this end, cytosine modified 12-mer oligodeoxynucleotides were prepared by solid-phase synthesis employing new α-anomeric 2′-deoxycytidine phosphoramidites. A multigram scale synthesis was developed for 5-iodo-α-d -2′-deoxycytidine ( 1 ) employing the direct glycosylation of cytosine with Hoffer's α-d -halogenose followed by separation of anomeric DMT nucleosides. Regarding base-pair stability and functionalization silver-mediated α/β-dC hybrid base pairs were found to be superior to β/β-dC homo pairs. According to their extraordinary properties, they might find applications in DNA diagnostics, material science, or nanotechnology.     

Recent advances and challenges in materials for 3D bioprinting

3D bioprinting has been developed as a promising technology in a wide variety of biomedical applications. However, the successful implementation of bioprinting is still heavily restricted by the relatively narrow range of printable and biocompatible materials. Recently, many comprehensive reviews of the main bioprinting methods, commonly used bioprinting materials and the trending bioprinting applications have been carried out. In this review, we focused on the trends in the development of materials for 3D bioprinting. The significance and recent advances of ECM-based materials, multi-material and stimuli-responsive materials for bioprinting were summarized successively. Moreover, the challenges in current studies and future perspectives of materials for 3D bioprinting were discussed.     

Enhancing the Water Stability of Al‐MIL‐101‐NH2 via Postsynthetic Modification

The resistance of metal–organic frameworks towards water is a very critical issue concerning their practical use. Recently, it was shown for microporous MOFs that the water stability could be increased by introducing hydrophobic pendant groups. Here, we demonstrate a remarkable stabilisation of the mesoporous MOF Al‐MIL‐101‐NH₂ by postsynthetic modification with phenyl isocyanate. In this process 86 % of the amino groups were converted into phenylurea units. As a consequence, the long‐term stability of Al‐MIL‐101‐URPh in liquid water could be extended beyond a week. In water saturated atmospheres Al‐MIL‐101‐URPh decomposed at least 12‐times slower than the unfunctionalised analogue. To study the underlying processes both materials were characterised by Ar, N₂ and H₂O sorption measurements, powder X‐ray diffraction, thermogravimetric and chemical analysis as well as solid‐state NMR and IR spectroscopy. Postsynthetic modification decreased the BET equivalent surface area from 3363 to 1555 m² g^?1 for Al‐MIL‐101‐URPh and reduced the mean diameters of the mesopores by 0.6 nm without degrading the structure significantly and reducing thermal stability. In spite of similar water uptake capacities, the relative humidity‐dependent uptake of Al‐MIL‐101‐URPh is slowed and occurs at higher relative humidity values. In combination with ¹H‐²⁷Al D ‐HMQC NMR spectroscopy experiments this favours a shielding mechanism of the Al clusters by the pendant phenyl groups and rules out pore blocking.     

基于交通信号灯信息的混合动力汽车节能预测控制方法

针对传统混合动力汽车控制方法不考虑已知道路交通信号灯信息对车辆能量管理影响的问题,提出了基于交通信号灯信息的混合动力汽车节能预测控制智能优化策略。通过建立混合动力汽车系统的简化模型,并采用连续广义最小残量方法求解模型预测控制问题。运用MATLAB/Simulink进行仿真,仿真结果验证了交通信号灯信息模型的有效性,以及所设计的模型预测控制算法大幅度提高混合动力汽车的燃油经济性的能力和实时控制性能。研究结果表明所提出的控制策略可以实现车辆行驶轨迹的优化控制,显著提高了车辆的燃油经济性,并满足系统的实时最优控制要求。     

APCI5000电气自动化成套装置设计

电气自动化成套装置种类繁多，并广泛应用于电力系统．结合现场实际商业运行期所积累的经验，并根据市场预测以及目前工控机发展动态，提出了采用APCI5000工业控制计算机实现电气自动化成套装置设计的最佳方案．     

电磁场中带电粒子束运动的力学模拟

研究以不同初速度进入互相垂直的匀强磁场和均强电场中的带电粒子束的运动情形，并同相似的力学运动相比拟，建立了直观的力学模型。     

属间远缘杂交水稻耐旱性生理特性的比较研究

采用在ＹＯＳＨＩＤＡ水稻专用培养营养液中添加一定量的ＰＥＧ ６０００的方法，比较研究了模拟干旱胁迫条件下属间远缘杂交新型水稻品种“远诱１号”（Ｙ）及其水稻亲本“圭６３０”（Ｇ）、高梁亲本“桃长红”（Ｔ）以及生产推广杂交组合“汕优６３”（Ｓ）等试验材料某些生态生理特性的差异。研究结果表明，在－１．０ＭＰａ的高渗胁迫下，Ｙ、Ｇ、Ｔ的萌发系数均有不同程度的下降，正常培养条件下的萌发系数ＧＣ分别为３６．９     

匀速运动的电偶极子的电场和磁场分布

本文通过对电偶极子电磁势的分析和相对论下电磁场在不同惯性系中的协变分布，计算了作匀速直线运动的电偶极子的电场和磁场的空间分布．     

静磁场伴随有静电场存在

阐述检测物体是否产生了电场的方法；通过实际检测证实立方体永磁体既产生了负静电场，也产生了正静电场，并测定了具体的场强．