Design and Fabrication of Composite Smart Structures with High Electric and Mechanical Performances for Future Mobile Communication

In this paper, we have developed a load-bearing outer skin for antennas, which is termed a composite smart structure (CSS). The CSS is a multilayer composite sandwich structure in which antenna layers are inserted. A direct-feed stacked patch antenna is considered. A design procedure including the structure design, material selection, and design of antenna elements in order to obtain high electric and mechanical performances is presented. An optimized honeycomb thickness is selected for efficient radiation and impedance characteristics. High gain conditions can be obtained by placing the outer facesheet in the resonance position, which is at about a half wavelength distance from the ground plane. The measured electrical performances show that the CSS has a great bandwidth (over 10%) and a higher gain than an antenna without a facesheet and has excellent mechanical performances, owing to the composite laminates and honeycomb cores. The CSS concept can be extended to give a useful guide for manufacturers of structural body panels and for antenna designers.     

Practical syntheses of [1,3,5]‐triazine dendritic molecules on solid supports

A practical and divergent synthesis of supported [1,3,5]‐triazine dendritic molecules on Wang resin, PEGA resin, SynPhase? Lanterns, and silica gel is described. The alkylamine linkers used allow derivatization with functionality for both synthetic (e.g., supported reagent and scavenger activity) and chemical biology applications. The use of supported intermediates allows differentiation of symmetric linkers without the need for protecting group chemistry. The synthetic route uses inexpensive, readily available starting materials in a straightforward and scaleable strategy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2248–2259, 2006     

Preparation and characterization of mesoporous silica thin films from polyethoxysiloxanes

Tetraethoxysilane (TEOS) and polyethoxysiloxanes (PEOSs; prepared by the acid‐catalyzed hydrolytic polycondensation of TEOS) were subjected to the sol–gel process in the presence of cetyltrimethylammonium bromide (CTAB), respectively. The PEOSs with M_w 700–26,000, as prepared by sol–gel coating of TEOS and PEOS under various conditions, were used. Uniform and crack‐free thin films of thickness 276–613 nm were prepared by spin‐coating of a PEOS solution containing CTAB. When the coating films were sintered at 400 °C, the combustion of ethoxy groups and CTAB took place to provide porous silica thin films. The structure of the thin films was found to be dependent on the molecular weight of PEOS and the molar ratio of CTAB/Si: lamellar or hexagonal phase was observed for M_w less than 15,000 and for CTAB/Si molar ratios greater than 0.10. Honeycomb structures were observed for M_w less than 5000 and for CTAB/Si molar ratios of 0.15. The honeycomb structure was also observed by atomic force microscopy and transmission electron microscope. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2542–2550, 2006     

Synthesis and Crystal Structure of a New 2D Honeycomb-like Cadmium(II) Complex with Tripodal Ligand

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｔｈｅｐａｓｔｓｅｖｅｒａｌｙｅａｒｓ ,ｃｏｎｓｉｄｅｒａｂｌｅｐｒｏｇｒｅｓｓｈａｓｂｅｅｎａｃｈｉｅｖｅｄｉｎｃｏｎｔｒｏｌｌｉｎｇｔｈｅａｓｓｅｍｂｌｙｏｆｉｎｄｉｖｉｄｕａｌｂｕｉｌｄｉｎｇｂｌｏｃｋｓｉｎｔｏｓｔｒｕｃｔｕｒｅｓｗｉｔｈｓｐｅｃｉｆｉｃｔｏｐｏｌｏｇｉｅｓａｎｄｉｎｔｅｒｅｓｔｉｎｇｐｒｏｐｅｒｔｉｅｓｓｕｃｈａｓｍｏｌｅｃｕｌａｒｒｅｃｏｇｎｉｔｉｏｎ ,ｉｏｎｅｘｃｈａｎｇｅａｎｄｓｅｌｅｃｔｉｖｅｇｕｅｓｔｉｎｃｌｕｓｉｏｎ .1 3 Ｉｔｉｓ…     

A novel phosphoramidite method for automated synthesis of oligonucleotides on glass supports for biosensor development

Two protocols for functionalization of glass supports with hexaethylene glycol (HEG)-linked oligonucleotides were developed. The first method (standard amidite protocol) made use of the 2-cyanoethyl-phosphoramidite derivative of 4,4′-dimethoxytrityl-protected HEG. This was first coupled to the support by standard solid-phase phosphoramidite chemistry followed by extension with a thymidylic acid icosanucleotide. Stepwise addition of the linker phosphoramidite graduated at 1% (relative to the total sites available) perstep at 50°C resulted in an optimal yield of immobilized oligonucleotides at a density of 2.24 × 10¹⁰ strands/mm². This observed loading maximum lies well below the theoretical maximum loading owing to nonspecific adsorption of HEG on the glass and subsequent blocking of reactive sites. Surface loadings as high as 3.73 × 10¹⁰/mm² and of excellent sequence quality were achieved with a reverse amidite protocol. The support was first modified into a 2-cyanoethyl-N,N-diisopropylphosphoramidite analog followed by coupling with 4,4′-dimethoxytrityl-protected HEG. This protocol is conveniently available when using a conventional DNA synthesizer. The reverse amidite protocol allowed for control of the surface loading at values suitable for subsequent analytical applications that make use of immobilized oligonucleotides as probes for selective hybridization of sample nucleic acids of unknown sequence and concentration.     

STUDY ON 1-HEXENE POLYMERIZATION BASED ON ZIEGLER-NATTA CATALYSTS WITH DOPED SUPPORT

A series of Ti/Mg supported catalysts are prepared by using ball-milled mixtures of MgCl2-ethanol adducts and NaCl as supports, and 1-hexene polymerizations catalyzed by the novel catalysts are studied. It is found that the molecular weight distribution of poly(1-hexene) becomes apparently narrower when catalysts with doped supports are used, indicating that changing the structure of the support is an effective way to regulate the active center distribution of heterogeneous Ziegler-Natta catalyst.     

不同分级循环加卸载模式下六边形蜂窝能量演化规律

为了阐明循环加卸载路径对六边形蜂窝能量演化的影响规律,设计了3种不同分级循环加卸载试验,揭示了不同分级循环加卸载模式下外界输入总能量、弹性变形能、耗散能、塑性变形能等参数的演化特征及相互关系,研究结果表明：不同分级循环加卸载作用下,蜂窝的初始峰值强度和平台应力与卸载过程蜂窝弹性能的释放程度有关;3种不同分级循环加卸载模式下外界输入总能量、蜂窝的弹性变形能和塑性变形能随着加卸载梯级增大呈现非线性增加的趋势,耗散能在前三级循环作用下随着加载次数增加而减小,在最后一级循环中循环载荷上限较大,扰动效应强于强化效应,耗散能呈现相反趋势;提升循环载荷上限,蜂窝内部损伤增加,且越接近蜂窝初始峰值强度,蜂窝的损伤越严重;同时提升循环载荷下限,蜂窝弹性能释放较少,损伤加剧。     

Universal system for liquid stationary phase classification on the basis of thermodynamical data

Summary Equations modifying Rohrschneider's relationship between I and thermodynamical characteristics values are derived. Polarity in chromatography is discussed as a possibility of stationary phases or absorbents to enter into intermolecular interactions and is determined on the basis of the partial molar free energies of solution (G) of six test substances. A simple method for the calculation of stationary phase polarity in terms of G from retention indices and McReynolds constants is given. Equations are presented for the calculation of stationary phase selectivity utilizing G data tabulated for selected test substances. The thermodynamical basis of selecting a reference phase for a unified system expressing the selectivity of stationary phases which can also be applied for adsorbents is suggested. The energy equivalent to an index unit, G_i.u., is discussed.     

金属载体催化剂的涂层研究

在高温氧化处理不同时间的金属载体箔片上涂覆MgAl2O4/Al2O3过渡涂层,利用TG-DSC,XRD,SEM,BET和超声振动等分析测试技术,对载体和涂层的微观结构与表面特性进行研究.结果表明,在950 ℃下高温氧化5 h,箔片表面生成板状Al2O3晶须,有利于增强涂层与箔片的附着力.在载体表面涂覆一层MgAl2O4/Al2O3过渡涂层,有助于提高活性组分与金属载体的结合力,可以获得高结合强度的涂层结构,促使活性元素高度分散.     

Improving resins for solid phase synthesis: incorporation of 1-[2-(2-methoxyethoxy)ethoxy]-4-vinyl-benzene

The preparation, characterisation and application of a series of non-grafted polystyrene (PS) resins containing a styrenic methoxypoly(ethylene glycol) (MPEG) derivative is presented. These novel PS-MPEG resins were designed to balance swelling and solvation with improved handling. The monomer, 1-[2-(2-methoxyethoxy)ethoxy]-4-vinyl-benzene, contained an inert phenyl ether linkage designed to provide broad chemical compatibility and stability, yet imparting all the favourable properties of the PEG group into the new resin, whilst maintaining a high loading capacity. The synthetic performance of the new resins compared very favourably to those of TentaGel™, ArgoGel™ and aminomethyl PS.