HPA/MXOY杂多酸在合成异戊酯上的应用研究

本文研究了HPA/MXOY固体杂多酸催化剂的制备及负载,并以异戊醇合成异戊酯为探针,用硅盐、锆盐、活性炭等物质为载体,进行了催化效果的研究及表征。实验结果得出:HPA/ZrO型杂多酸催化剂效果最佳,酯收率可达82%。     

分子筛负载HPA/TiO2催化剂的性能

报道了分子筛负载杂多酸和二氧化钛催化剂MS／HPA／TiO2的制备及其对品红溶液降解的效果，系统研究了催化品红溶液降解的优化条件。实验表明，MS／HPA／TiO2具有良好的催化活性且容易回收。当MS：HPA：TiO2=1：10：1，品红的浓度为0．005％（10mL），催化剂的用量为10mg，反应时间为10min，品红的降解率达到96．87％。     

Investigation of sulfonated poly(ether ether ketone sulfone)/heteropolyacid composite membranes for high temperature fuel cell applications

The sulfonated poly(ether ether ketone sulfone) (SPEEKS)/heteropolyacid (HPA) composite membranes with different HPA content in SPEEKS copolymers matrix with different degree of sulfonation (DS) were investigated for high temperature proton exchange membrane fuel cells. Composite membranes were characterized by Fourier transfer infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). FTIR band shifts suggested that the sulfonic acid groups on the copolymer backbone strongly interact with HPA particles. SEM pictures showed that the HPA particles were uniformly distributed throughout the SPEEKS membranes matrix and particle sizes decreased with the increment of copolymers' DS. The holes were not found in SPEEKS‐4/HPA30 (consisting of 70% SPEEKS copolymers with DS = 0.8 and 30% HPA) composite membrane after composite membranes were treated with boiling water for 24 h. Thermal stabilities of the composite membranes were better than those of pure sulfonated copolymers membranes. Although the composite membranes possessed lower water uptake, it exhibited higher proton conductivity for SPEEKS‐4/HPA30 especially at high temperature (above 100 °C). Its proton conductivity linearly increased from 0.068 S/cm at 25 °C to 0.095 S/cm at 120 °C, which was higher than 0.06 S/cm of Nafion 117. In contrast, proton conductivity of pure SPEEKS‐4 membrane only increased from 0.062 S/cm at 25 °C to 0.078 S/cm at 80 °C. At 120 °C, proton conductivity decreased to poor 0.073 S/cm. The result indicated that composite membranes exhibited high proton conductivity at high temperature. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1967–1978, 2006     

硅钨杂多酸与牛血红蛋白相互作用的研究

多金属氧酸盐作为抗艾滋病病毒、抗流感病毒和抗肿瘤的药物,引起了人们对多金属氧酸与蛋白质之间相互作用的极大关注。蛋白质空间结构的任何变化引起的构象变化都意味着蛋白质分子的活性改变,因此,蛋白质与内源性化合物及许多药物分子之间相互作用的研究一直受到人们关注[1￣3]。血红蛋白是动物及人体内执行输氧任务的蛋白质,是生命机体进行各种生理活动的主要承担者。血红蛋白分子中每条α链和β链含有的色氨酸(Trp)残基分别为α-14Trp、β-15Trp、β-37Trp。Alpert[4]等认为位于疏水腔内的β-37Trp是血红蛋白内源荧光的主要来源,同时β…     

HRP-12催化剂上苯与直链烯烃的烷基化反应 Ⅱ. 失活动力学研究

采用连续操作的釜式反应器，利用悬浮态的负载杂多酸催化剂HRP-12上的烷基化反应的实验数据进行参数估值，确定了失活反应速率常数、失活反应活化能、活性保留函数的失活反应级数和烯烃摩尔浓度的失活反应级数，建立了苯与直链烯烃烷基化反应的失活动力学模型。模型表明：该失活反应对于活性保留函数是一级失活反应，对于烯烃摩尔浓度是二级失活反应。统计检验表明：所得失活动力学方程在显著性水平α=0.005下有较高的实验数据拟合精度和模型可信度。     

HRP-12催化剂上苯与直链烯烃的烷基化反应 Ⅰ. 本征反应动力学研究

直链烷基苯是生产阴离子表面活性剂直链烷基苯磺酸盐的重要原料。2000年以美国环球油品公司(UOP)的脱氢法工艺生产的直链烷基苯占世界直链烷基苯产量的88％。脱氢法以液体氢氟酸为催化剂由正构烯烃与苯进行烷基化反应生产直链烷基苯。由于液体氢氟酸催化剂具有较强的腐蚀     

Dehydrogenation activity and structure of polyaniline supported heteropolyacid catalysts

Polyaniline(PAN) supported H₆P₂W₁₈O₆₂(PW) , H₃PMo₁₂O₄₀ (PMo) and H₄PMo₁₁VO₄₀(PMoV) catalysts were prepared and their activities for hexanol conversion were tested. IR, XRD, ICP and SEM measurements proved that the heteropolyacids (HPA) could be supported on this type of polymer. The PAN supported HPA catalysts exhibit higher redox activities and low acid-base activities for the hexanol conversion. The redox activities increase with increasing amount of the heteropolyacid. Substitution of Mo ion by V ion results in an increase of redox activities of the catalysts. This revised version was published online in June 2006 with corrections to the Cover Date.     

Synthesis of Pharmaceutical Intermediates by Toluene Benzylation over Heteropoly Acids on Different Support

Selective formation of pharmaceutical intermediates like diphenylmethane, dimethyl- diphenylmethane, benzyl toluene and benzoic acid by liquid phase, toluene benzylation with benzyl chloride as a benzylating agent, was systematically studied over plane clay (K-10, montmorillonite), plane H-Beta, plane MFI structured titanosilicate (TS-1) and heteropoly acids [HPA, namely dodeca-tungstophosphoric acid [H3PO4.12WO3.xH2O] (TPA), dodeca-molybdo phosphoric acid ammonium salt hydrate [H12Mo12N3O40P aq] (DMAA), sodium tungstate hydrated purified [Na12WO4.2H2O] (STH)] supported on clay, H-beta and TS-1. The 20%TPA/Clay, 30%TPA/H-Beta and 30%TPA/TS-l, were observed to be the best catalyst samples over plane clay, plane H-Beta and plane TS-1. The catalyst samples are compared with respect to benzyl chloride conversion and selectivities for diphenylmethane, dimethyl-diphenylmethane, benzyl toluene and benzoic acid. The reaction follows the pseudo-first order rate power law model. The apparent rate constants are calculated and compared with the reported ones.     

杂多酸/聚苯胺掺杂材料的制备、表征及性质

采用固相合成法,以苯胺为单体,过硫酸铵为氧化剂,制备了4种杂多酸/聚苯胺掺杂材料。测定了其在CHCl3和CCl4中的溶解度,并以红外光谱、紫外—可见光谱、X射线粉末衍射、电导率等测试手段对掺杂材料进行了表征。通过与本征态聚苯胺相比,证明出制备的材料是掺杂材料,同时表明聚苯胺经质子酸掺杂后,形成共轭结构,从而具有良好的导电性能。     

Synthesis and characterization of silica-supported Preyssler nano particles and its catalytic activity for photodegradation of methyl orange

Abstract

Heteropolyacid (H₁₄ [NaP₅W₃₀O₁₁₀])/SiO₂ nano particles were synthesized by a micro emulsion technique. The morphology and size of these nano particles were characterized using, transmission electron microscopy and X-ray diffraction. In a designed photo reactor, the photo degradation of methyl orange as common azo dye pollutants in the environment was selected as a test reaction to estimate the catalytic activity of the synthesized nano particles and found to be excellent.