介质的非均匀性对高次谐波影响的研究

讨论了气体介质的非均匀性对飞秒激光高次谐波产生过程的可能影响.计算结果表明,采用喷阀技术所提供的气体介质的密度梯度和气体原子运动速度的影响很小,不会产生实验上可观测的效果.这一结果支持了喷气靶在高次谐波产生中的广泛应用 关键词： 高次谐波 气体介质 各向异性 飞秒激光     

Simulation of the instability of an accelerating gaseous envelope

The development of perturbations of the parameters of a dense gaseous envelope traveling with an acceleration driven by a difference in the pressures on either side is investigated numerically. Plane and axisymmetric time-dependent flows of a compressible medium are considered. The effect of both the density of the envelope and the form of the initial perturbations of its shape and motion on the mass cumulation in the compactions formed is studied. The evolutions of the perturbations of a layer and the surface of a contact discontinuity accelerated by an impinging plane shock wave are compared.     

Study of the winter and summer changes of the air composition in the church of Szalowa, Poland, related to conservation

The St. Michael Archangel’s Church in Szalowa, Poland, was selected for closer investigation with respect to the indoor/outdoor air exchange and its influence on the air quality and work arts preservation. Chemical composition, size and abundance of particulate matter and concentration of gases NO₂, SO₂, O₃ inside and outside the church were determined. To study seasonal variation of the weather condition (temperature, inversion level, wind direction) and the influence of seasonal sources of the air pollution (like heating of the nearby houses), samples were collected in winter and summer time. It was stated that suspended particulate matter inside the wooden church has in general an outdoor source. Several groups of particles were distinguished such as the organic ones, soil dust, nitrates and sulphates. In case of organic and soil dust particles, the concentration inside was higher than outside. From the results, in comparison to literature data, one can conclude that accumulation of particulate suspended matter in the church is more intense than in other types of buildings. Gaseous pollutants were detected but their concentration was negligible.     

稀土钨青铜K0.71Nd0.028WO3的制备及其电性能

Tetragonal tungsten bronze K_0.71Nd_0.028WO₃ was synthesized by rare earth co-permeation method using Keggin type POMs of α-K₁₀[SiCu₃(OH₂)W₉O₃₇]·6H₂O (abbreviated as SiW₉Cu₃) as precursor. XRD, XPS, XRF, TG-DTA were used to characterize the resulting material. The XPS results indicate that Nd has permeated and diffused into the body of the sample and exists in tungsten bronze in the form of K_0.71Nd_0.028WO₃. The results of TG-DTA show that K_0.71Nd_0.028WO₃ begins to decompose at 320 ℃. The consequence of DC four-probe shows that the conductivity of the sample permeated by rare earth is 10³ times higher than that of the sample only permeated by methanol at room temperature. The conductivity of the sample only permeated by methanol is only 10^-3 S·cm^-1 but the conductivity of the sample permeated by rare earth is 1.65 S·cm^-1.     

Selection of sampling adsorbents and optimisation and validation of a GC-MS/MS method for airborne pesticides

A methodology for the sampling and determination of airborne pesticides has been developed. The trapping efficiency of three adsorbents, namely XAD-2,XAD-4 and a sandwich sorbent (PUF-XAD2-PUF), was tested for 34 pesticides and the latter was selected because it presented the highest retention capacity without breakthrough. Pesticides were determined by gas chromatography coupled to an ion trap mass spectrometer in tandem. The method showed recoveries ranging from 70% to 120% with limits of quantification in the range of 16.1–322.6 pg m^?3 when 155 m³ were sampled. This analytical strategy was applied to 10 indoor air samples collected in dwellings from the Valencian Region. Six pesticides, namely diphenylamine, pyrimethanil, bifenthrin, lambda-cyhalothrin, permethrin and cypermethrin were detected in indoor samples with concentrations ranging from 1.46 to 22.02 ng m^?3.     

New Interfaces and Approaches to Machine Learning When Classifying Gestures within Music

Interactive music uses wearable sensors (i.e., gestural interfaces—GIs) and biometric datasets to reinvent traditional human–computer interaction and enhance music composition. In recent years, machine learning (ML) has been important for the artform. This is because ML helps process complex biometric datasets from GIs when predicting musical actions (termed performance gestures). ML allows musicians to create novel interactions with digital media. Wekinator is a popular ML software amongst artists, allowing users to train models through demonstration. It is built on the Waikato Environment for Knowledge Analysis (WEKA) framework, which is used to build supervised predictive models. Previous research has used biometric data from GIs to train specific ML models. However, previous research does not inform optimum ML model choice, within music, or compare model performance. Wekinator offers several ML models. Thus, we used Wekinator and the Myo armband GI and study three performance gestures for piano practice to solve this problem. Using these, we trained all models in Wekinator and investigated their accuracy, how gesture representation affects model accuracy and if optimisation can arise. Results show that neural networks are the strongest continuous classifiers, mapping behaviour differs amongst continuous models, optimisation can occur and gesture representation disparately affects model mapping behaviour; impacting music practice.     

激光拉曼光谱法分析乙烯裂解气

研究建立了乙烯裂解气中6种主要组分H_2,CH_4,C_2H_4,C_2H_6,C_3H_6,C_3H_8的混合气体激光拉曼(Raman)分析法,可将分析时间缩短至约2 min,且无载气、色谱柱等消耗,在加快分析反馈的同时大大降低了仪器维护及使用费用。该方法采用指纹峰浓度曲线,通过筛选计量峰、扣除信号大于3倍信噪比(3 S/N)交叉干扰的修正方式,实现了混合气中6种目标组分的定量分析。在混合气体定量分析中,Raman分析法对H_2,C_2H_4,C_3H_6,C_3H_8的定量分析具有较好的测量精度,均小于2%;但对CH_4及C_2H_6的测量精度有待提高,表明所建立的Raman分析法需进一步优化完善。     

气相爆轰波在分叉管中传播现象的数值研究

数值研究气相爆轰波在分叉管中的传播现象.用二阶附加半隐龙格-库塔法和5阶WENO格式求解二维欧拉方程,用基元反应描述爆轰化学反应过程,得到了密度、压力、温度、典型组元质量分数场及数值胞格结构和爆轰波平均速度.结果表明:气相爆轰波在分叉管中传播,分叉口左尖点的稀疏波导致诱导激波后压力、温度急剧下降,诱导激波和化学反应区分离,爆轰波衰减为爆燃波(即爆轰熄灭).分离后的诱导激波在垂直支管右壁面反射,并导致二次起爆.畸变的诱导激波在水平和垂直支管中均发生马赫反射.分叉口上游均匀胞格区和分叉口附近大胞格区的边界不是直线,其起点通常位于分叉口左尖点上游或恰在左尖点.水平支管中马赫反射三波点迹线始于右尖点下游.分叉口左尖点附近的流场中出现了复杂的旋涡结构、未反应区及激波与旋涡作用.旋涡加速了未反应区的化学反应速率.反射激波与旋涡作用并使旋涡破碎.反射激波与未反应区作用,加速其反应消耗,并形成一个内嵌的射流.数值计算得到的波系演变和胞格结构与实验定性一致.     

纳米二氧化钛粉体的气相爆轰制备

 介绍了利用氢氧混合气体为原料、以四氯化钛为前驱体、气相爆轰制备纳米二氧化钛粉体的方法。利用XRD衍射结果分析证明,产物为金红石相和锐钛矿相的二氧化钛混晶,其晶粒尺度为纳米量级。通过XRD、SEM、TEM分析可以得出,粒子基本为球形,大部分粒子粒径为10~20 nm,也有少量的100 nm左右的粒子产生。分析后发现,反应发生在爆燃转爆轰的过程中和爆轰管中的湍流现象是导致大粒子产生的主要原因。在对在氢过量和氧过量两种状况下,对爆轰所产生的产物的形貌进行了对比,分析发现两种状况产生纳米二氧化钛粉末粒径分布和形貌并没有太大变化。