基于RL&SM通用夹具系统的主动寻位技术及其实现方法

介绍了RL&SM通用夹具的寻位系统 ,描述了主动寻位与制造信息转换问题 ,提出和实现了相应的控制方法及其系统实现中的关键技术。理论分析与实验结果表明 ,提出的解决方法和技术是可行的 ,为RL&SM通用夹具系统的实际应用奠定了理论基础和技术支持     

CNC系统中任意三维椭圆弧的高速插补新方法

本文根据两步递归插补的思想,导出了任意三维椭圆弧高速插补的公式和算法.它是空间圆弧高速插补方法在三维椭圆弧的情况下进一步推广应用.本文最后还对插补算法进行了稳定性分析和误差分析.     

Gelation of poly(n-butylisocyanate) in benzene

Poly (n-butylisocyanate)-benzene solutions prepared by solubilization at 45°C, followed by aging at room temperature were found to be metastable for months, although, eventually, they separated into a birefringent polymer-rich phase and an isotropic solution. These metastable solutions, as well as isothermally phase-separated biphasic samples, flowed and exhibited dynamic moduli indicative of low polymer connectivity. By contrast samples prepared by a freeze-thaw cycle were uniformly and highly birefringent and showed network (gel) behavior at room temperature. The mechanism of gel formation is most likely the exclusion of the polymer from the benzene crystal during crystallization, forcing the polymer to align and exist at grain boundaries. Films formed from solutions have different moduli than those formed from gels, and are consistent with the proposed mechanism.     

空间弧面凸轮数控加工程序的计算机辅助编制

介绍了空间弧面凸轮数控加工的方法和数控加工程序的计算机辅助编程方法 ,并给出了辅助编程后模拟显示结果     

Cutting tool materials for high speed machining

High speed machining (HSM) is one of the emerging cutting processes, which is machining at a speed significantly higher than the speed commonly in use on the shop floor. In the last twenty years, high speed machining has received great attentions as a technological solution for high productivity in manufacturing. This article reviews the developments of tool materials in high speed machining operations, and the properties, applications and prospective developments of tool materials in HSM are also presented.     

基于PC总线的三维数控雕刻机CNC系统

详细介绍了基于ＰＣ总线的数控雕刻机ＣＮＣ系统,该系统在硬件上采用了ＰＣ总线工业控制机,在软件上采用了模块化结构化设计、中文图形菜单操作、图形编程、模拟仿真和加工轨迹在线显示等先进技术。整个转件系统采用Ｃ语言设计。该系统在文字图案雕刻和模具（如底上的图案）制造等实际中应用,取得了很好的效果。     

Electrochemical machining of metals: Fundamentals of electrochemical shaping

Basic problems of metal electrochemical shaping theory are considered. Exact and approxi1mate (quasi-steady-state, locally one-dimensional) methods for solving direct and inverse problems are analyzed. Experimental methods for improving the electrochemical shaping accuracy are considered.Translated from Elektrokhimiya, Vol. 40, No. 12, 2004, pp. 1438–1480.Original Russian Text Copyright © 2004 by Davydov, Volgin, Lyubimov.     

复合式鱼雷战斗部威力试验研究

该文分析了复合式鱼雷战斗部的结构和性能，结合模拟威力试验，验证了利用复合式鱼雷战斗部攻击抗爆能力强的大、中型潜艇的可行性，并提出了增强威力的具体措施，为进一步指导复合式鱼雷战斗部设计提供参考。     

混粉镜面电火花加工机理

介绍了混粉镜面电火花加工的发展和应用，论述了大面积混粉电火花加工机理，分析了传统大面积电火花加工很难获得良好表面质量的原因．     

高速走丝线切割加工计算机数字控制装置体系结构的研究

从发展高速走丝线切割加工及其计算机数字控制（CNC）装置系列产品出发，对其CNC装置的体系结构作了系统的研究．基于充分利用计算机领域中软、硬件开发技术及其成果，提出了一种中低档高速走丝线切割加LCNC装置的硬件结构和软件结构．