锭子弹性管的刚度计算及其对动态性能的影响

首先推导了纺纱锭子中开螺旋槽弹性管的等效抗弯刚度及底部刚度系数的计算公式，分析了弹性管各参数对其刚度及振动性能的影响，并进行了模态测试，实验值与计算值基本一致。     

Mechanical Properties of Laterally Driven Microresonance with a One-Side Straight-Leg Suspension

The mechanical properties of lateral polysilicon comb-driven microresonators suspended from one-side straight-leg beams, which are widely used in linear microvibromotors, are investigated in this paper.The lateral vibration of the microresonator was modeled assuming that the symmetry of the microstructures and the applied loads are different. Methods were given to calculate the stress, lateral displacement, spring coefficient, and resonant frequency. The results show that the simple mechanical model is a superfluous system with three unknown variables. The results differ from pervious results for a microresonator suspended from double-side straight-leg beams, which has been commonly used to design linear microvibromotors.     

Effect of a Shock Pulse on a Floating Ice Sheet

The vibrations of a viscoelastic plate lying on an elastic liquid base subjected to pulse loading have been studied theoretically and experimentally. The effect of the variable depth of the reservoir, plate thickness, and strain relaxation time on the value of the plate vibration amplitude and the length and curvature of the flexural gravity wave profile are analyzed. Good agreement of theoretical and experimental results is obtained.     

Laser pulse heating of steel surface and flexural wave analysis

Laser gas-assisted material processing finds wide application in industry. The modelling of heating, elastic response of the substrate material, and the wave analysis gives insight into the laser workpiece interaction. In the present study, laser gas-assisted heating of steel is considered. The normal component of the thermal stress is taken as the source of load for the flexural wave generation in the material. The flexural wave generated is simulated and the wave characteristics are analyzed at four locations at the workpiece surface. The numerical scheme employing a control volume approach is introduced when solving the governing equations of flow and heat transfer while finite element and spectran element methods are used when solving the stress and wave equations. It is found that the normal component of the stress is tensile. The dispersion effect of the workpiece material, interference of the reflected beam, and partial overlapping of second mode of the travelling wave enable to identify a unique pattern in the travelling wave in the substrate.     

An unflexural refined model of deformation of multilayered plates on an undeformable foundation

The stress-strain state of multilayered plates on an undeformable foundation is investigated. The design diagram of a transversely loaded plate is formed by supplementing it with a symmetric one about the contact surface of the foundation. The double-thickness plate obtained becomes loaded bilaterally and symmetrically about its midsurface. In such a way, only unflexural deformations can be modeled, which reduces the number of unknowns and the general order of differentiation of the resolving system of equations. The refined continual model developed takes into account the deformations of transverse shear and transverse compression in high iterative approximations. The cases of a rigid contact between the foundation and the plate and frictionless slip of the plate over the foundation are considered. Calculations confirm the efficiency of such an approach, which allows one to obtain solutions qualitatively and quantitatively close to three-dimensional ones. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 42, No. 5, pp. 643–654, September–October, 2006.     

多孔混凝土的强度特性

同普通混凝土一样，强度是多孔混凝土硬化后的主要力学性质，进行多孔混凝土基层路面结构设计、材料组成设计以及施工质量检测时，均需采用各种强度指标进行评价。多孔混凝土属于骨架空隙结构，其强度取决于内部起胶结作用的水泥石性质、集料特性及浆集比等。试验结果表明：多孔混凝土抗压强度早期增长较快，符合线性关系，后期强度发展较慢，符合对数关系；长龄期劈裂强度与28d劈裂强度之间符合对数关系；42．5级水泥多孔混凝土与32．5级水泥多孔混凝土的抗压强度之间存在良好的线性相关性。此外，多孔混凝土弯拉强度与抗压强度及劈裂强度与抗压强度之间均存在相关性良好的幂指数关系，并据此得出相应的对应关系表，便于工程实际应用。     

NSRL-XAFS光束线弧矢聚焦双晶单色器设计

针对XAFS光束线能量动态扫描的实验特点，介绍了弧矢聚焦双晶单色器的物理设计：包括晶体光学结构、性能参数计算、晶体热载分析和弧矢弯曲原理．弧矢缩比选择为1：4．88，水平接收角由原来的1mrad拓宽到3mrad，在不改变基本配置的情况下，获得了样品上束癍缩小、光子通量高达半个量级以上的增益．     

英汉空间范畴化对比分析——以in、on和(在)……上、(在)……里为例

在人类所有的概念范畴中,空间范畴是最基本、最重要的范畴之一,它反映了人们对事物间各种空间关系的认知、分类和组织.本文以认知语言学的范畴化理论为基础考察了英语介词in、on与汉语的(在)……上、(在)……里在空间范畴化上的异同.分析结果表明:英、汉语在划分这两个空间范畴的核心成员时趋于一致,而在划分它们的非核心成员.尤其是边缘成员时则有差异.造成这种差异的深层原因是由于英、汉两个民族拥有不同的空间认知系统和习惯,并在观察空间关系时采取了不同的观察视角.     

Flexural rigidity of a liquid surface

The energy of a mass of liquid is evaluated asymptotically in powers of the range of the intermolecular potential divided by a typical dimension of the liquid. The leading term is the internal energy, proportional to the liquid volume. The second term is the energy of surface tension, proportional to the area of the liquid surface. The third term is proportional to an integral over this surface of the square of the mean curvature of the surface minus one-third of its Gaussian curvature. This new term has exactly the form of the bending energy of a thin elastic plate. Comparing it with the bending energy yields expressions for the flexural rigidity and the Poisson ratio of the liquid surface. This flexural rigidity of the surface leads to new terms in the equation of equilibrium of the liquid surface, in addition to the usual surface tension terms.     

Metabolomic-based investigation of Yinlan alleviating hyperlipidemia by inhibiting blood stasis and phlegm turbidity through the PXR-CYP3A4-ABCB1-FXR pathway

Yinlan lipid regulatory capsule (YL) is a composite traditional Chinese medicine (TCM) new drug to alleviate hyperlipidemia, while its therapeutic mechanism in vivo was not clarified with nontargeted metabolomics investigation. An animal model was established in rats fed a high-fat diet, and their body weights, body mass index (BMI) and blood cholesterol levels were measured. Serum, liver and kidney tissue samples were also extracted for PXR-CYP3A4-ABCB1-FXR signaling pathway research using PCR and UHPLC–MS. The obtained plasma samples were analyzed by UHPLC-Q-TOF-MS metabolomic investigation, which revealed PXR-CYP3A4-related metabolites and changes induced by YL. Finally, the key metabolites were chosen as index components, and their levels in the serum, liver, small intestine and bile were used for simultaneous UHPLC–MS-MS determination. The results indicated that YL was effective in rebalancing blood TG and TC levels (compared to controls). With respect to the PXR-CYP3A4-ABCB1 pathway, as a result of YL’s effect, gene expression or activity of the two targets decreased significantly in both the liver and kidney. The same trend was observed in the serum samples mentioned above. Metabolomics screening and data revealed that 44 metabolites can be regarded as biomarkers related to hyperlipidemia, fatty acids synthesis, and body energy consumption, as well as synthesis, transportation and exertion of cholesterol. YL’s treatment focused on 26 of them, primarily bile acids, indicating that the antihyperlipidemic effect of this drug lies in its inhibitory activity of cholesterol metabolism. Subsequent analysis of those in vivo components revealed that significant increases (compared to the model group) occurred in the blood, liver, small intestine and bile in groups that received medium and high doses of YL (while the low dose was relatively unchanged). Those target components exhibit a close relationship with PXR and/or CYP3A4. The use of YL repressed PXR expression and subsequently decreased CYP3A4 activity. As a result, synthesis of related bile acids increased, while cholesterol levels decreased, consequently leading to the attenuation of hyperlipidemia. This study comprehensively investigated the antihyperlipidemia mechanism of YL based on its repression of PXR-CYP3A4 activity and related metabolite yield, establishing an accurate method for evaluating the therapeutic effect of YL.