热连轧精轧机组温度模型的改进

从实际生产数据入手,研究了温度模型设定精度的现状及设定精度与各影响因素之间的关系,同时还消化了原来的温度模型程序并将其移植到微机上.经大量的离线统计回归分析,提出了一个行之有效的温度模型改进方案.该改进方案的思路同样适合其他热轧生产线.     

Comparison of different reactive organophosphorus flame retardant agents for cotton: Part I. The bonding of the flame retardant agents to cotton

N-Methylol dimethylphosphonopropionamide (MDPA), known as “Pyrovatex CP” and “Pyrovatex CP New” commercially, has been one of the most commonly used durable flame retardant agents for cotton for many years. In our previous research, we developed a flame retardant finishing system for cotton based on a hydroxy-functional organophosphorus oligomer (HFPO) in combination with a bonding agent such as trimethylolmelamine (TMM) and dimethyloldihydroxyethyleneurea (DMDHEU). In this research, we investigated the bonding of these two flame retardant finishing agents to cotton. We found that the majority of MDPA is bound to cotton by its N-methylol group and that the use of TMM as a co-reactant modestly increases the fixation of MDPA onto cotton. For HFPO, however, the use of a bonding agent is necessary to form a covalent linkage between HFPO and cotton. Both the fixation of HFPO on cotton and its laundering durability are influenced by the effectiveness and concentration of the bonding agent. The commercial product of HFPO contains approximately 33% more phosphorus than that of MDPA and the percent fixation of HFPO on cotton is also moderately higher than that of MDPA. The bonding between MDPA and cotton is significantly more resistant to hydrolysis during multiple launderings than that between HFPO and cotton. The selection of catalyst also plays a significant role in influencing the bonding of the flame retardant agents to cotton.     

Mechanical and physico-chemical characterization of cyclodextrin finished polyamide fibers

We present the study of the cyclodextrin (CDs) finishing of polyamide fibers (PA) by means of citric acid (CTR) as crosslinking agent. We observed that the mode of grafting happened by the formation of a crosslinked polymer formed between CTR and CDs. This polymer physically adhered to the fibers network and was resistant to hot water washings. Modified fibers were characterized by evaluating the contact angle with a polar liquid and by studying the hysteresis of damping of PA fibers (Cahn balance) with various grafting rates and by studying the absorptivity of grafted fabrics via the technique of the posed drop (Digidrop^® instrument). Then a mechanical characterization of the PA fabrics grafted with various proportions of CDs was accomplished, by traction and tear tests by using a tensile-test bench Lohmergy. Finally a topographic study of PA grafted surfaces was approached by atomic force microscopy (AFM and LFM; contact and non-contact mode) which permitted to evaluate the roughness and the chemical heterogeneity of the grafted surfaces.     

Synthesis and antimicrobial activity of a perfluoroalkyl-containing quaternary ammonium salt

A novel perfluoroalkyl-containing quaternary ammonium salt 5 was designed and synthesized. Consequently, the antimicrobial activities of compound 5 were measured with Escherichia coli 8099 as a Gram-negative strain and Staphylococcus aureus ATCC 6538 as a Gram-positive strain. Both the minimum inhibitory concentration (MIC, the lowest concentration of compound 5 that inhibits microbial growth) values of quaternary ammonium salt 5 against Escherichia coli 8099 and Staphylococcus aureus ATCC 6538 were 7.8 μg/ml.     

Synthesis of perfluoroalkyl-containing multifunctional groups compounds for textile finishing

A new kind of perfluoroalkyl-containing multifunctional groups compound was designed. Treatment of 1H,1H,2H,2H-perfluorooctyltrichlorosilane (4) with allylmagnesium bromide provided key intermediate 1H,1H,2H,2H-perfluorooctyltriallylsilane (2). Hydroboration followed by oxidation, epoxidation and dihydroxylation of 2 gave perfluoroalkyl-containing multifunctional groups compound 1a, 1b and 1c, respectively.     

脉冲电化学齿轮光整加工电源设计与研究

脉冲电化学齿轮光整加工工艺具有加工效率高、成本低、表面质量好等特点，其实现的关键环节之一是高频、大功率脉冲电源，因此介绍了脉冲电化学齿轮光整加工工艺的原理及特点，论述了脉冲电源的构成原理及设计思路，设计制造出基于现代电力电子器件——绝缘栅双极晶体管(IGBT)的高频、大功率脉冲电源；应用该电源进行齿轮脉冲电化学光整加工试验，得到了满意的结果。     

脉冲电化学光整加工实验研究

用中性电解液进行脉冲电化学表面光整加工可获得良好的表面质量．着重研究了加工的电流密度及电解液浓度对加工表面质量的影响规律，找出了最佳电解液浓度及电流密度．研究表明，脉冲电化学光整加工技术有望在很多关键零件表面光整加工中发挥重要作用。     

环腺苷酸制剂对生长育肥猪生长性能和肉脂品质的影响

选用 2 0 kg左右的“杜长”元杂交猪 2 4头 ,随机分成 1个对照组、 3个试验组 ,试验组分别添加环腺苷酸制剂 (二丁酰 c AMP) 10 mg/kg(试验 1组 )、 2 0 mg/kg(试验 2组 )、 30 mg/kg(试验 3组 ) ,进行饲养试验、屠宰试验和肉的品质测定。结果表明 :添加二丁酰 c AMP,能提高生长育肥猪的生长性能和改善肉脂品质。以添加二丁酰 c AMP2 0 mg/kg效果最好 ,与对照组相比 ,日增重提高 11.80 % (P <0 .0 1) ,料重比降低 16 .4 % (P <0 .0 1) ,胴体瘦肉率提高 8.12 % (P <0 .0 5 ) ,眼肌面积增加 11.98% (P <0 .0 5 ) ,平均背膘厚下降 18.90 % (P <0 .0 1) ;大理石纹评分提高 11.6 6 % (P <0 .0 1) ;肌肉间脂肪含量提高 2 8.88% (P <0 .0 1)。     

Nanocrystalline cellulose/fluorinated polyacrylate latex via RAFT‐mediated surfactant‐free emulsion polymerization and its application as waterborne textile finishing agent

A simple method for nanocrystalline cellulose (NCC)/fluorinated polyacrylate was developed by RAFT‐mediated surfactant‐free emulsion polymerization, in which the nanocomposites formed a core‐shell spherical morphology. The influence of the content of NCC‐g‐(PAA‐b‐PHFBA) (AA was acrylic acid, HFBA was hexafluorobutyl acrylate) on the properties of latex and film were systematically studied. The monomer conversion, the tensile strength, and water–oil repellency of film increased first and then decreased, the latex particle size decreased first and then decreased, when the content of NCC‐g‐(PAA‐b‐PHFBA) increased from 1 to 6 wt %. Elongation at break and thermal stability distinctly decreased when the content of NCC‐g‐(PAA‐b‐PHFBA) gradually increased. XPS showed that the fluorine‐containing groups well concentrated at the film–air interfaces during the annealing process. SEM analysis revealed that the treated fiber had a rugged surface, and the treated fabric had an excellent water repellency. In addition, this green grafting method in water offered a new perspective for the fabrication of exceptional NCC‐based nanocomposites with NCC as the core and also helped to promote the potential applicability of NCC in a range of multipurpose applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1305–1314     

Wool Surface Modification and Its Adhesion with Nano Finishing Agent

The launderability of wool fabrics treated by nano finishing agent influences directly the functional endurance of the treated wool fabric.In order to investigate the effect of wool fibers surface modification on the functional endurance of nano finishinp wool fibers,in this paper,for the first time wool fibers were chemically modified by using NaClO aqueous and KMnO4 aqueous,and then chemically modified wool fibers and native wool fibers were treated using nano ZnO finishing agent,respectively.The laundera...