Comparison study of exchange-correlation functionals on prediction of ground states and structural properties

Despite significant advances in first-principles calculation methods, there is no single exchange-correlation functional which predicts the ground state of materials without an error yet. We investigated how accurately ground states of binary semiconductors are described using 16 exchange-correlation functionals (with or without van der Waals corrections). LDA, PBEsol, SCAN (with or without rVV10 correction), and PBE with D3 van der Waals correction (zero or Becke-Johnson damping) show good predicting power. The lattice constants of stable phases were slightly better described by SCAN, PBEsol, PBE+D3 (Becke-Johnson damping), and MS2. We also propose a set of functionals to double-check the stability of new materials based on the majority vote.     

基于GA_XGBoost模型的大学生科研能力预测问题研究

科学评价大学生科研创新能力对我国科研水平的提高具有重要意义.采用机器学习模型来预测大学生科研能力可以起到良好的效果,提出一种GAXGBoost模型来实现对大学生的科研能力预测.此模型是以Xgboost算法为基础,然后充分利用遗传算法的全局搜索能力自动搜索Xgboost最优超参数,避免了人为经验调参不准确的缺陷,最后采用精英选择策略以此确保每一轮都是最佳的进化结果.通过分析表明,所采用的GAXGBoost模型在大学生科研能力预测的结果中具有很高的精度,将此模型与Logistic Regression、Random Forest、SVM等模型进行对比,GAXGBoost模型的预测精度最高.     

Identifying aspirin polymorphs from combined DFT-based crystal structure prediction and solid-state NMR

A combined experimental and computational approach was used to distinguish between different polymorphs of the pharmaceutical drug aspirin. This method involves the use of ab initio random structure searching (AIRSS), a density functional theory (DFT)-based crystal structure prediction method for the high-accuracy prediction of polymorphic structures, with DFT calculations of nuclear magnetic resonance (NMR) parameters and solid-state NMR experiments at natural abundance. AIRSS was used to predict the crystal structures of form-I and form-II of aspirin. The root-mean-square deviation between experimental and calculated ¹H chemical shifts was used to identify form-I as the polymorph present in the experimental sample, the selection being successful despite the large similarities between the molecular environments in the crystals of the two polymorphs.     

利用反预报方法从截面预言近滴线丰质子核的结合能

在Origin等数据处理软件中,当实验数据较少时,自由参数的不同初始化设置会导致较大的结果差异,这为物理结果的确定带来较大不确定性.通过最小二乘法分析了345MeV/u ~(78) Kr+~9Be反应中产生的丰质子同位素的截面和结合能,并得到线性回归方程.通过回归方程,利用结合能预报部分丰质子核素的截面,以及通过实验截面对近质子滴线核素的结合能进行反预报测量.这对于近质子滴线的丰质子核素实验测量具有较好的借鉴意义.     

线性回归分析与能源需求预测

结合实例介绍了回归模型方法在能源预测中的应用，具体地讨论了最简单、最基本的直线回归模型结构及参数估计方法，对于其他一些曲线回归模型则可通过变量代换转化为直线回归模型。     

SSCK系列数控车床的致命度分析

通过对7台数控车床故障数据进行分析，查清了各故障部位、故障模式的比率，建立了失效模式影响及致命性分析(FMECA)表，从而为可靠性分析和可靠性设计提供了依据     

动态校正的PI型广义预测控制器及其在反应釜系统中的仿真研究

提出了一种新型的广义预测控制器。由于在控制器的设计中,进行了预测误差的动态校正,并且控制器采用了比例积分型(PI)目标函数,因此该控制器对未建模动态具有很强的鲁棒性。应用低阶的模型对一个强放热的化学反应釜模型进行的仿真研究检验了该方法的有效性。     

三峡库区建设中政府行为分析

政府与市场是实现资源配置的两种最基本的形式，市场是资源配置的基础，政府行为主要是纠正市场失灵，但政府在干预过程中也可能出现政府失灵，目前我国在三峡库区建设中，既要加强政府行为的主导作用，同时也应重视及时防范与纠正政府行为有可能出现的失灵。     

A new rule of vibration sampling for predicting acoustical radiation from rectangular plates

Structural surface velocity distribution is often used to predict structural borne sound radiation. However the sampling interval of velocity should be chosen carefully to increase the prediction accuracy and to reduce the system cost. In this paper, several factors affecting the sampling interval are theoretically analyzed and discussed for a vibrating baffled rectangular plate. A new rule for the determination of the sampling interval is formulated. Using this rule, the results from both numerical simulations and experiments may be explained well.     

Calibrating software reliability models when the test environment does not match the user environment

Software failures have become the major factor that brings the system down or causes a degradation in the quality of service. For many applications, estimating the software failure rate from a user's perspective helps the development team evaluate the reliability of the software and determine the release time properly. Traditionally, software reliability growth models are applied to system test data with the hope of estimating the software failure rate in the field. Given the aggressive nature by which the software is exercised during system test, as well as unavoidable differences between the test environment and the field environment, the resulting estimate of the failure rate will not typically reflect the user‐perceived failure rate in the field. The goal of this work is to quantify the mismatch between the system test environment and the field environment. A calibration factor is proposed to map the failure rate estimated from the system test data to the failure rate that will be observed in the field. Non‐homogeneous Poisson process models are utilized to estimate the software failure rate in both the system test phase and the field. For projects that have only system test data, use of the calibration factor provides an estimate of the field failure rate that would otherwise be unavailable. For projects that have both system test data and previous field data, the calibration factor can be explicitly evaluated and used to estimate the field failure rate of future releases as their system test data becomes available. Copyright © 2002 John Wiley & Sons, Ltd.