一种立体织机平行打纬机构的设计与优化

针对多层织物织造过程中,各层纬纱打纬力需保持一致以及需要减少钢筘与纱线之间摩擦的要求,提出八连杆平行打纬机构,并根据工艺要求对打纬机构进行优化。以打纬机构的主轴转动140°时,筘座在后心位置处的近似静止位移Δs最小为优化目标,通过Matlab软件分析确定设计变量,优化钢筘在后死心位置的近似停留时间。运动学仿真结果表明,优化后的打纬机构不仅保证了钢筘的打纬动程和其在后死心处的静止时间,而且增大了钢筘的惯性打纬力,有利于厚重织物的打纬。     

表面纤维直径与羊毛机织精纺面料的刺痒感

通过前臂试验对26种轻薄型羊毛机织精纺面料和7种其他纤维的轻薄型机织面料的刺痒感进行了比较研究,并用显微镜对部分轻薄型羊毛机织面料的表面纤维分布进行了研究。结果表明多数毛织物在温度为(24±1)℃、相对湿度为(65±5)％的条件下存在刺痒感,并且毛织物的刺痒感与其表面纤维的平面直径及直径大于26μm的表面纤维根数密切相关。     

人工气候条件下的人体着装试验的研究

本文通过物理试验方法对棉、毛、丝、棉麻及毛涤五种面料进行性能测试,得出其风格数值、透湿阻抗.为了反映面料对人的生理、心理的影响,有必要在人工气候条件下进行人体模拟着装试验,得出面料的人体舒适感觉值。借助多元线性回归方法,通过物理测试与人体试验的对照分析,发现它们之间具有良好的一致性。     

纯棉针织物活性染料预碱法染色工艺研究

采用传统染色工艺和预减法染色工艺，对纯棉针织物进行染色实验。通过对各自固色率的分析比较，并从活性染料的染色原理进行分析，指出预减法染色可以提高活性染料的固色率。     

计算机模拟织物变形形态的研究现状

介绍了国外计算机图形学界对织物变形形态的研究现状．按建模原理分为几何方法。物理方法及综合方法．     

Three-Dimensional Measurement and Reconstruction of Fabric Drape Shape

This paper introduces a new method of measuring the three-dimensional drape shape of fabrics with structural light. First, we apply parallel annular structural light to form light and shade alternating contour stripes on the surface of fabrics. We then collect the images of contour stripes using Charge Coupled Device （CCD）. Subsequently, we process the images to identify the contour stripes and edges of fabrics, and obtain the fabric contour lines of curved surfaces. Finally, we apply three-dimensional curved surface modeling method based on a network of polar coordinates, and reconstruct the three-dimensional drape shape of fabrics. Experiments show that our method is effective in testing and reconstructing three-dimensional drape shape of fabrics.     

Characterization of the behaviour of flavour microcapsules in cotton fabrics

Nanotechnology processes have recently been introduced into the textile field. One of these processes involves encapsulated nanoparticles or nanoproducts, known as microcapsules. They are available with a wide range of products which confer different properties related to the nature of the encapsulated product. The composition of the wall material determines the release of the product into the fabric and is the object of study in the present work. The behaviour of microencapsulated peppermint was analyzed on cotton fabrics.Different application methods have been tested, impregnation versus bath exhaustion. As impregnation turned out to be the most efficient, some recipes were assayed and the effect of microcapsules on maintenance conditions was evaluated in order to determine the most suitable method with the longest lasting effect on fabrics.The effect of microcapsules is usually measured by the presence of a property such as odour measurements when flavours are encapsulated. The aim of this work is to explain the behaviour of the cotton fabrics with microcapsules bound to their fibers, to determine the relationship between their macroscopic properties and microscopic characteristics. A procedure based in FTIR spectroscopy is also proposed to quantify the presence of microcapsules in the fabrics.IR spectra of the textiles were obtained to determine the presence of microcapsules, which was corroborated by SEM techniques.     

经编针织运动服装的织物性能研究

从人体穿着舒适性能考虑,织物的热湿舒适性越来越成为人们重视的服用性能.本文针对功能性的针织运动服的原料选用和织物组织结构,分析其导湿性.     

INTROMISSION OF WATER-REPELLENT AND HYDROSCOPIC PROPERTIES SIMULTANEOUSLY TO PP BY PLASMA DISCHARGE METHOD

Plasma-induced surface graft copolymerization of acrylic acid on polypropylene non-woven fabric (PP-g-AA) and polypropylene membrane were reported. The extents of grafting were controlled by the plasma and polymerization condition. Hexadecyltrimethyl ammonium bromide was then coupled with the carboxyl group of PP-g-AA to obtain a polyion complex (PIC). At last, CF4 plasma was used to give PICs hydrophobic property. The moisture regain and water-repellency of the processed PICs was investigated. The surfaces were characterized using ATR FT-IR and XPS. The result indicates that the products have very high ability to adsorb moisture, even better than cotton fiber. At the same time, the products show excellent hydrophobic property, which can‘t be wetted by those reagents whose surface tensions were higher than 327mN/m.