考虑多种损坏构成特征的沥青路面预防性养护决策方法

由于沥青路面损坏构成的多样性, 相同的路面状况指数(pavement condition index, PCI)可能代表不同的损坏组合. 当多种损坏并存且损坏程度接近时, 用PCI和主导损坏(最严重、扣分最多的路面损坏)难以得到具有针对性的养护对策. 因此, 通过对PCI的深入分析, 明确了主导损坏代表性不足的路段, 以现行预防性养护决策方法为基础, 补充了一种考虑损坏构成特征、更具针对性的决策方法. 以上海城市道路近5年的检测、养护数据为分析基础, 首先利用有序聚类算法将路段按PCI水平分组, 分析了不同阶段路面损坏构成和差异水平; 然后, 针对多种损坏并存且损坏差异不显著的路段, 根据预防性养护的实施效果筛选了能够反映正确预防性养护经验的有效养护路段; 最后, 基于有效养护路段建立并对比分析了2个基于BP(back propagation)神经网络的养护决策模型. 结果表明: 当PCI水平介于优良(84.4~93.0分)时, 不同损坏程度接近, 主导损坏代表性不足; 考虑多种损坏构成特征的BP神经网络模型表现出更高的决策精度, 测试集决策正确率达86.20%, 优于仅考虑主导损坏的模型(58.50%). BP神经网络与传统决策树法结合能够优化沥青路面决策过程, 提高养护对策选取的针对性.     

钩形弯交叉口信号协同控制优化方法研究

针对车辆在钩形弯交叉口与相邻常规交叉口间的整体运行特性，建立了各条车道的车辆平均延误计算模型。以各交叉口的周期时长和相位绿灯时间为约束，钩形弯交叉口与相邻常规交叉口间的车辆平均延误最小为目标，建立了信号协同配时方案。以位于苏州市高新区内有轨电车沿线的两个相邻交叉口为例，采用实际数据验证所建立的方法，并设置钩形弯渠化方案。将设置的钩形弯交叉口与其相邻常规交叉口的信号协同作为改进方法，在VISSIM软件中对比分析改进方案与现状方案的车辆延误指标。实验结果表明，钩形弯交叉口与相邻常规交叉口的信号协同优化方法可有效提高交叉口的通行能力，尤其是干道直行机动车的通行能力，可降低车辆的平均延误。     

高陡横坡段桩柱式桥梁双桩基础受力分析

基于高陡横坡段桩柱式桥梁双桩基础承载特性,提出了一种改进有限杆单元计算分析方法.分析了高陡横坡段桩柱式桥梁双桩基础承载机理及受力特性,建立了双桩基础计算分析模型.其次,根据前、后桩与边坡相对位置关系,给出了后桩所受剩余下滑力与前桩所受土压力的比例关系.在传统有限杆单元分析方法基础上,结合陡坡桩受力特征,导得了考虑桩土共同作用与"P-Δ"效应的单元刚度矩阵修正方法,并在此基础上编制了适用于高陡横坡段桩柱式桥梁双桩基础的有限杆单元分析MATLAB计算程序.采用室内模型试验对本文计算方法进行验证,给出了适用于陡坡段桥梁桩基的设计流程图.研究结果表明:本文理论计算值与模型试验实测结果吻合良好,表明本文计算方法正确可行,可为同类工程设计提供参考.     

工程实践中的体系与系统

 介绍了国际上通行的体系概念，通过实例阐述了常见的体系类型，从多个维度描述了系统与体系的区别，根据实践总结，提出体系与系统的核心界定准则，并结合工程实践进行了详细描述。     

In Vivo Biological Behavior of Polymer Scaffolds of Natural Origin in the Bone Repair Process

Autologous bone grafts, used mainly in extensive bone loss, are considered the gold standard treatment in regenerative medicine, but still have limitations mainly in relation to the amount of bone available, donor area, morbidity and creation of additional surgical area. This fact encourages tissue engineering in relation to the need to develop new biomaterials, from sources other than the individual himself. Therefore, the present study aimed to investigate the effects of an elastin and collagen matrix on the bone repair process in critical size defects in rat calvaria. The animals (Wistar rats, n = 30) were submitted to a surgical procedure to create the bone defect and were divided into three groups: Control Group (CG, n = 10), defects filled with blood clot; E24/37 Group (E24/37, n = 10), defects filled with bovine elastin matrix hydrolyzed for 24 h at 37 °C and C24/25 Group (C24/25, n = 10), defects filled with porcine collagen matrix hydrolyzed for 24 h at 25 °C. Macroscopic and radiographic analyses demonstrated the absence of inflammatory signs and infection. Microtomographical 2D and 3D images showed centripetal bone growth and restricted margins of the bone defect. Histologically, the images confirmed the pattern of bone deposition at the margins of the remaining bone and without complete closure by bone tissue. In the morphometric analysis, the groups E24/37 and C24/25 (13.68 ± 1.44; 53.20 ± 4.47, respectively) showed statistically significant differences in relation to the CG (5.86 ± 2.87). It was concluded that the matrices used as scaffolds are biocompatible and increase the formation of new bone in a critical size defect, with greater formation in the polymer derived from the intestinal serous layer of porcine origin (C24/25).     

Oxidative Epigallocatechin Gallate Coating on Polymeric Substrates for Bone Tissue Regeneration

Plant derived flavonoids have not been well explored in tissue engineering applications due to difficulties in efficient formulations with biomaterials for controlled presentation. Here, the authors report that surface coating of epigallocatechin gallate (EGCG) on polymeric substrates including poly (L‐lactic acid) (PLLA) nanofibers can be performed via oxidative polymerization of EGCG in the presence of cations, enabling regulation of biological functions of multiple cell types implicated in bone regeneration. EGCG coating on the PLLA nanofiber promotes osteogenic differentiation of adipose‐derived stem cells (ADSCs) and is potent to suppress adipogenesis of ADSCs while significantly reduces osteoclastic maturation of murine macrophages. Moreover, EGCG coating serves as a protective layer for ADSCs against oxidative stress caused by hydrogen peroxide. Finally, the in vivo implantation of EGCG‐coated nanofibers into a mouse calvarial defect model significantly promotes the bone regeneration (61.52 ± 28.10%) as compared to defect (17.48 ± 11.07%). Collectively, the results suggest that EGCG coating is a simple bioinspired surface modification of polymeric biomaterials and importantly can thus serve as a promising interface for tuning activities of multiple cell types associated with bone fracture healing.     

项目引入法——可普遍采用的研究性学习模式

研究性学习是实施素质教育和创新教育的一种新型教学方式。在工科类课程的教学中 可采用引入一个工程项目,通过项目设计来学习研究新知识,完成教学计划。     

浅谈抓好市政工程项目施工质量管理

工程项目质量管理是工程项目管理工作的重要组成部分，它是工程项目从施工准备到交付使用的全过程中为保证和提高工程质量所进行的各项组织管理工作。文章从提高质量意识、实行质量管理目标、建立质量体系和制度等方面对搞好市政工程项目施工的质量管理工作进行了探讨。     

如何做好桩基工程旁站监理

文章介绍了桩基工程旁站监理的过程和实效及保证监理目标实现的具体措施。     

基于扫描数据零件轮廓特征自动识别的方法

主要研究基于扫描数据自动识别零件轮廓特征的方法与技术．首先给出了零件轮廓特征自动识别的工作流程，然后提出了零件轮廓特征自动识别的原理与算法，最后通过具体实例验证了本方法的优点及可行性。