Preparation of macromonomers by copolymerization of methyl acrylate dimer involving β fragmentation

The unsaturated dimer of methyl acrylate [CH₂C(CO₂CH₃)CH₂CH₂CO₂CH₃, or MAD] was copolymerized with various monomers to prepare copolymers bearing the ω-unsaturated end group [CH₂C(CO₂CH₃)CH₂ ] arising from β fragmentation of the MAD propagating radical. Copolymerizations of MAD with cyclohexyl and n-butyl acrylate resulted in copolymers with ω-unsaturated end groups, and increasing the temperature up to 180 °C resulted in an increase in the rate of β fragmentation of MAD radicals relative to propagation. Only a small amount of unsaturated end groups was introduced by copolymerization with ethyl methacrylate (EMA), and the EMA content in the copolymer increased with temperature. These findings could be explained by the reversible addition of the poly(EMA) radical to MAD. The copolymerization with ethyl α-ethyl acrylate (EEA) did yield a copolymer containing unsaturated end groups with MAD units as part of the main chain, although the steric hindrance of the ethyl group suppressed homopropagation and crosspropagation of EEA, resulting in low polymerization rates. Therefore, the copolymerization of MAD with acrylic esters at high temperatures was noted as a convenient route for obtaining acrylate–MAD copolymers bearing unsaturated end groups at the ω end (macromonomer). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 597–607, 2004     

Photoinitiated curing of mono‐ and bifunctional epoxides by combination of active chain end and activated monomer cationic polymerization methods

Photoinitiated cationic polymerization of mono‐ and bifunctional epoxy monomers, namely cyclohexeneoxide (CHO), 4‐epoxycyclohexylmethyl‐3′,4′‐epoxycyclohexanecarboxylate (EEC), respectively by using sulphonium salts in the presence of hydroxylbutyl vinyl ether (HBVE) was studied. The real‐time FTIR spectroscopic, gel content determination, and thermal characterization studies revealed that both hydroxyl and vinyl ether functionalities of HBVE take part in the polymerization. During the polymerization, HBVE has the ability to react via both active chain end (ACE) and activated monomer mechanisms through its hydroxyl and vinyl ether functionalities, respectively. Thus, more efficient curing was observed with the addition of HBVE into EEC‐containing formulations. It was also demonstrated that HBVE is effective in facilitating the photoinduced crosslinking of monofunctional epoxy monomer, CHO in the absence of a conventional crosslinker. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4914–4920, 2007     

Effect of end groups on complexation kinetics between cyclodextrins and guest polymers

α‐Cyclodextrin (α‐CD) has been complexed with various poly(ethylene glycol) (PEG) derivatives in aqueous solution. It has been found that the end groups of PEG derivatives affect the complexation kinetics greatly, but have only a little influence on the thermodynamic behavior. By increasing the hydrophobicity of end groups, the complexation speeds up rapidly. On the other hand, the bulky end groups slow down the threading of polymeric guests into the cavity of CD. By changing the hydrophobicity and the size of end groups, the complexation rate can be adjusted in the range of several orders of magnitudes, which should be quite useful in the design of new supramolecular systems. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2050–2057, 2006     

黑格尔审美话语的政治性

黑格尔美学理论的表述形式由于时间潮流的冲刷而渐渐风化,这是我们面对黑格尔美学理论的困境。为了应对这一难题,我们试图采用话语表述策略来还原黑格尔的审美世界,从而初步证明审美的理论世界能够而且应该从政治性话语世界汲取能量和活力这一观点。     

末端炔烃与亚铜离子反应的实验研究

研究了乙炔亚铜的电子吸收光谱，探讨了末端炔烃和亚酮离子的反应条件，生成物的稳定性和炔亚铜的组成，研究结果表明，末端炔烃的活泼性与介质中氨的含量密切相关，在ｃ（ＮＨ３．Ｈ２Ｏ）／ｃ（Ｃｕ＾＋）摩尔比为２７０～９００的范围内，反应活性最大，易与亚铜离子反应生成炔亚铅，红色乙炔亚铜的组成为ＣｕＣ≡ＣＣｕ，它在含有羟胺的氨性介质中很稳定，不受空气中氧的影响，这些结构为利用生成炔亚铜的以应来鉴定混合气中微笑     

Comparison of the sensitivity of 11 crosslinked hyaluronic acid gels to bovine testis hyaluronidase

Crosslinked hyaluronan gels are used in various applications where their stability is a prerequisite. The sensitivity of such gels to hyaluronidase can be determined as an index of stability by several approaches: chromatography, electrophoresis, and viscometry. We describe here a test based on the colorimetric determination of the N-acetyl-d-glucosamine released by hyaluronidase in standardized conditions. The sensitivities to bovine testicular hyaluronidase of 11 different gels used to fill skin wrinkles (Restylane; Perlane; Juvéderm 18, 24, 24HV, 30, and 30HV; Surgiderm 18, 24XP, 30, and 30XP) were compared.The method was reproducible, easy to perform, not time-consuming and allowed us to demonstrate that the sensitivity to testicular hyaluronidase was dependent on the degree of crosslinking of the gels and also on their monophasic/biphasic nature. Under our conditions, Surgiderm 30, 24XP and 30XP were the most resistant gels.We propose to retain the hyaluronidase test to predict the in situ stability of a crosslinked gel used to fill skin wrinkles.     

安培检测芯片毛细管电泳及其初步应用

An end-channel amperometric detector with a guide tube for working electrode was designed and integrated on a home-made glass microchip. The guide tube was directly patterned and fabricated at the end of the detection reservoir, which made the fixation and alignment of working electrode relatively easy. The fabrication was carried out in a two-step etching process. A 30 μm carbon fiber microdisk electrode and Pt cathode were also integrated onto the amperometric detector. The baseline separation of dopamine (DA), catechol (CA) and epinephrine (EP) was achieved within 80 s. Relative standard deviations of not more than 5.2% were obtained for both peak currents and migration times of DA and CA (n=5). Using standard adding method, DA in tLrine and plasma samples was detected. The recoveries were in the range of 83%—103%.     

The effect of the counterion composition on the chain restriction in the cationic polymerization of isobutylene

The effects of the nature of halogens in the initiatingtert-butyl halide-aluminum-containing Lewis acid system on the number average molecular weightM _n and the structure of end groups of polyisobutylene macromolecules obtained in the cationic polymerization of isobutylene in hexane at -78 °C were studied. An increase inM _n is observed in the transition from chlorine to bromine and iodine, accompanied by a decrease in the fraction of end C=C groups and an increase in the relative content of C-Hal groups (Hal = Cl, Br, and I). When atoms of different halogens are present in the counterion, more bulky atoms preferentially participate in the formation of the end groups. The results are interpreted within the framework of the principle of hard and soft acids and bases.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1184–1187, May, 1996.     

控制异丁烯阳离子聚合终止方式的新方法—活性中心转化法

控制异丁烯阳离子聚合终止方式的新方法──活性中心转化法曹宪一，王强，武冠英（北京化工大学高分子材料研究所，北京，１０００２９）关键词异丁烯，阳离子聚合，活性中心转化自八十年代中期Ｈｉｇａｓｈｉｍｕｒａ及Ｋｅｎｎｅｄｙ等人陆续发现乙烯基醚类单体及异丁烯...     

玻璃池窑的计算机辅助设计 I.燃油蓄热室流液洞马蹄焰玻璃池窑

用理论和实践经验相结合的方法,采用ＢｏｒｌａｄｎＣ＋＋语言设计了一个燃油蓄热室流液洞马蹄焰玻璃池窑,用ＡｕｔｏＣＡＤ１２．０版软件包绘制了三张窑炉图（平面图、横剖面图、纵剖面图）。