Functional Carbazole Liquid‐Crystal Block Codendrimers with Optical and Electronic Properties

The synthesis and characterisation of a family of block codendrimers consisting of highly versatile mesogenic and carbazole‐containing 2,2‐bis(hydroxymethyl)propionic acid (bis‐MPA) dendrons are reported. The liquid‐crystal behaviour was investigated by means of differential scanning calorimetry, polarised‐light optical microscopy and X‐ray diffraction. Depending on the chemical structure of the constituent dendrons, the codendrimers show lamellar or columnar mesophases. On the basis of the experimental results, models both at the molecular level and in the mesophase are proposed. The physical properties of the block codendrimers derived from the presence of the carbazole moiety in their structure were investigated: photoluminescence in solution and in the mesophase, electrochemical behaviour and hole transport. Electrodeposition of carbazole dendrons afforded a globular supramolecular conformation in which the mesogenic molecular side plays a key role.     

铅锡合金沉积物的显微组织

将离子浓度比为5∶5的铅锡电沉积分形生长沉积物制备成金相样品，用金相显微镜观察了它们的显微组织。结果表明，在此情况下，铅锡电沉积生成物由两相组成，即铅锡共晶相和铅基固溶相，两相呈交替层状分布。     

硼酸对镍-镁合金电沉积和电化学性质的影响

该文报道了分别用0．05、0．10、0．15、0．33、0．50g／mL的硼酸进行电沉积镍-镁合金的实验。原子吸收光谱实验的结果表明，沉积相中包含不等量的镍和镁，电流效率也随硼酸量的不同而发生不同趋势的变化。从极化实验的结果，讨论了硼酸在电沉积中所起的作用是阻碍氢气的析出。在溶出伏安图中，能观察到5种不同强度的Mg2Ni峰，与XRD得到的结果相吻合。循环伏安测量结果证明镍-镁合金沉积薄膜电极具有良好的充／放电性能。     

Phenol biosensor based on electrochemically controlled integration of tyrosinase in a redox polymer

An amperometric biosensor for the detection of phenolic compounds was developed based on the immobilization of tyrosinase within an Os-complex functionalized electrodeposition polymer. Integration of tyrosinase within the redox polymer assures efficient catechol recycling between the enzyme and the polymer bound redox sites. The non-manual immobilization procedure improves the reproducibility of fabrication process, greatly reduces the desorption of the enzyme from the immobilization layer, and, most importantly prevents fast inactivation of the enzyme by its substrate due to fast redox cycling. A two-layer sensor architecture was developed involving ascorbic acid oxidase entrapped within an electrodeposition polymer in a second layer on top of the redox polymer/tyrosinase layer. Using this sensor architecture it was possible to eliminate the current interference arising from direct ascorbate oxidation up to a concentration of 630 μM ascorbic acid. The effects of the polymer thickness, the enzyme/polymer ratio, and the applied potential were evaluated with respect to optimal sensor properties. The sensitivity of the optimized sensors for catechol was 6.1 nA μM⁻¹ with a detection limit of 10 nM, and for phenol 0.15 nA μM⁻¹ with a detection limit of 100 nM.     

电化学沉积Cu-In-Se薄膜

采用电化学沉积方法在钼箔上制备Cu-Se、In-Se和Cu-In-Se薄膜,对电沉积的工艺参数进行了测试,发现Cu-In-Se是一种诱导共沉积,虽然沉积膜不具备化学计量比,但具有一定的光电性能.     

Influence of boric acid on the electrochemical deposition of Ni

The electrolytic deposition of Ni onto a paraffin-impregnated graphite electrode from supporting chloride electrolyte (0.5 mol dm⁻³ NaCl) adjusted to the required pH using dilute HCl is investigated. The effect of electrolyte composition on the Ni electrodeposition is studied using linear sweep voltammetry in the cathodic region. An elimination voltammetry procedure was applied to evaluate the polarization curves. The aim of this work was to deduce the mechanism of Ni reduction in the chloride bath as well as the influence of boric acid on this. Positively-charged NiCl⁺ ions were found to be the electroactive particles in the Ni reduction mechanism. The strong competition between the NiCl⁺, Cl⁻ and H⁺ ions for active sites at the electrode is discussed. Kinetically-controlled adsorption/desorption processes of various species were also confirmed using elimination voltammetry with a linear scan. The evolution of gaseous hydrogen, catalyzed by the freshly-deposited Ni, accompanies the electrodeposition process. The presence of boric acid at a sufficiently high concentration inhibits the deposition of Ni and, at the same time, improves the morphology and brightness, as well as the adhesion of the deposited Ni. Elimination voltammetry with a linear scan is an efficient way to evaluate current–potential curves that reflect the electrodeposition of one-component Ni coatings. By eliminating selected currents, additional interesting and useful information can be obtained from voltammetric data.     

电流密度对钙磷沉积层组成和结构的影响(英文)

用X射线衍射、激光拉曼光谱以及等离子体原子发射光谱等技术研究了电化学沉积钙磷陶瓷过程中 ,电流密度对电沉积层组成和结构的影响 .实验表明阴极表面得到的沉积物是几种钙磷盐组成的混合物 ,且其成份随电流密度的改变而发生较大的变化 .在电解液温度为 75℃条件下 ,当控制电流密度较低时 ,沉积层主要由CaHPO4· 2H2 O (DCPD)和Ca8H2 (PO4) 6· 5H2 O (OCP)组成 ;随着电流密度的增加 ,阴极表面逐渐生成Ca3 (PO4) 2 ·nH2 O (TCP)和Ca10 (PO4) 6(OH) 2 (HAP) .当电流密度大于 5mA/cm2 时 ,电沉积层的主要成份为羟基磷灰石 (HAP) .     

电沉积羟基磷灰石/TiO2复合涂层

结合强度;电沉积羟基磷灰石/TiO2复合涂层     

电沉积镍钨注钼电极的析氢反应

在所有电极过程中研究最多的是析氢反应,其重要性一直为化学界所关注。提高电极活性的各种方法中,普遍采用电沉积法,它价廉简便、效果明显。但涂层不够牢固,在使用过程中易脱落,使用寿命短。为了克服上述缺点,作者将电沉积和离子注入技术联合使用,即在Ni、W镀层上注入Mo离子,利用Mo离子的能量将Ni、W打入表面内层,进行离子束混合。这既     

烟酸对酸性硫酸盐体系铜电沉积的影响

对溶液A: 0.8 mol•L－1硫酸铜,0.6 mol•L－1硫酸,5.0×10－5 mol•L－1氯离子,1.0×10－4 mol•L－1聚乙二醇的溶液,溶液B:在溶液A中加入2.0×10－2 mol•L－1烟酸,pH为0.5,运用循环伏安和计时安培法研究玻碳电极上铜的电沉积行为.结果表明,铜的电沉积过程经历了晶核形成过程,其电结晶按瞬时成核和三维生长方式进行.烟酸的加入对铜的电沉积具有阻化作用,但不改变铜的电结晶机理.沉积层的X射线衍射表明Cu为面心立方结构,在烟酸存在下沉积层出现(220)高择优取向,这可能是烟酸在Cu(220)晶面上发生强烈吸附作用的结果.