电凝聚法脱除高浓度印染废水CODcr研究

在不同pH值、板间距、电流强度、通电时间、电流密度、投加食盐量的条件下，研究电凝聚法对高浓度染料废水CODcr去除效果，得到了亲水性的高浓度染料活性艳红X-3B染料液CODc，去除的最佳反应条件，为电凝聚法处理染料水的工业化实施提供了有益的参考。     

电凝聚控制MBR膜污染的研究

试验考察了SECMBR的膜过滤特性,探讨了电凝聚对控制MBR膜污染的作用及机理.试验结果表明:胞外聚合物(EPS)、溶解性代谢产物(SMP)、ζ电位和污泥颗粒粒径等是膜污染的重要影响因素.SECM BR的膜污染远小于SM BR;SECM BR原位溶出铁离子与EPS结合,絮凝性增强,滤饼层污染减轻;SECM BR中电凝聚可降低单位容积活性污泥分泌的SM P与EPS,减轻膜污染;SECM BR降低EPS和SM P中主要污染物蛋白质的比例,减轻膜污染;ζ电位与Rc之间呈负相关,在SMBR与SECMBR中相关度分别为-0.798 8和-0.557 4.SECM BR在电场与铁粒子作用下降低了ζ电位绝对值,减轻了膜污染.     

高压脉冲电絮凝法处理电镀废水

在电解槽中将铁板作为电极,探讨了高压脉冲电絮凝技术处理含Cr3+,Cr6+和Zn2+的电镀废水,并与直流电絮凝方法作了对比.实验结果表明,高压脉冲电絮凝法处理的工业电镀废水出水水质较好,在最优条件下,处理后的废水中总铬和Cr6+含量均为~0.1 mg/L,Zn2+含量为~0.6 mg/L,pH=8.3,均达到国家规定的排放标准水平.该法运行方便,处理时间短、与直流电絮凝法相比能量效率高,是较理想的电镀废水治理工艺,具有很好的推广应用价值.     

液体聚了二烯原位涂层研究”──Ⅱ．电活性铝离子的形成及其对PBA的凝聚作用

采用电量法和失重法，测定了裸洁Ａｌ电极在不同浓度、温度和ＰＨ值的聚丁二烯酸（ＰＢＡ）溶液中阳极溶解速度，确定了电活性Ａｌ（Ⅲ）离子的最佳形成条件及其对ＰＢＡ的凝聚作用规律．结果表明，在６０℃温度，ｐＨ＝３．０的０．６ｍｏｌ·Ｌ－１柠檬酸＋１．０ｇ·Ｌ－１ＰＢＡ溶液中产生的电活性铝离子对水溶性不饱和高分子低聚物的凝聚作用最强．简单讨论了这一电凝聚作用的机理．     

Electrodegradation of Acid Mixture Dye through the Employment of Cu/Fe Macro-Corrosion Galvanic Cell in Na2SO4 Synthetic Wastewater

Traditional wastewater purification processes are based on a combination of physical, chemical, and biological methods; however, typical electrochemical techniques for removing pollutants require large amounts of electrical energy. In this study, we report on a process of wastewater purification, through continuous anodic dissolution of iron anode for aerated Cu/Fe galvanic cell in synthetic Na₂SO₄ wastewater solution. Electrochemical experiments were conducted by means of a laboratory size electrolyzer, where electrocoagulation along with electrooxidation phenomena were examined for wastewater containing Acid Mixture dye. The above was visualized through the employment of electrochemical (cyclic voltammetry and ac impedance spectroscopy techniques) along with instrumental spectroscopy analyses.     

Combining Coagulation and Electrocoagulation with UVA-LED Photo-Fenton to Improve the Efficiency and Reduce the Cost of Mature Landfill Leachate Treatment

This study focused on the reduction of the treatment cost of mature landfill leachate (LL) by enhancing the coagulation pre-treatment before a UVA-LED photo-Fenton process. A more efficient advanced coagulation pretreatment was designed by combining conventional coagulation (CC) and electro-coagulation (EC). Regardless of the order in which the two coagulations were applied, the combination achieved more than 73% color removal, 80% COD removal, and 27% SUVA removal. However, the coagulation order had a great influence on both final pH and total dissolved iron, which were key parameters for the UVA-LED photo-Fenton post-treatment. CC (pH = 5; 2 g L⁻¹ of FeCl₃6H₂O) followed by EC (pH = 5; 10 mA cm⁻²) resulted in a pH of 6.4 and 100 mg L⁻¹ of dissolved iron, whereas EC (pH = 4; 10 mA cm⁻²) followed by CC (pH = 6; 1 g L⁻¹ FeCl₃6H₂O) led to a final pH of 3.4 and 210 mg L⁻¹ dissolved iron. This last combination was therefore considered better for the posterior photo-Fenton treatment. Results at the best cost-efficient [H₂O₂]:COD ratio of 1.063 showed a high treatment efficiency, namely the removal of 99% of the color, 89% of the COD, and 60% of the SUVA. Conductivity was reduced by 17%, and biodegradability increased to BOD₅:COD = 0.40. With this proposed treatment, a final COD of only 453 mg O₂ L⁻¹ was obtained at a treatment cost of EUR 3.42 kg COD⁻¹.     

Advantage of selective production of green rusts for Sb(V) removal in Fe(0) electrocoagulation

The removal efficiency of pollutants in Fe(0) electrocoagulation (EC) has been associated closely with the speciation of generated Fe(II)/Fe(III) oxides during this process, which is very complicated and can be affected by various factors. In this work, in-situ Raman, X-ray diffraction and some other techniques have been used to study the speciation of Fe under different conditions and to establish a relationship between Fe speciation and Sb(V) removal efficiency. Results indicated that concentration of dissolved oxygen (DO) is a key factor influencing Fe(0) EC. It was found that green rusts (GRs) were formed and were then transformed into magnetite at lower DO concentration, and Sb(V) removal efficiency reached 99.9% after 30 min of EC. In contrast, γ-FeOOH was formed at high DO concentration, and the removal efficiency of Sb(V) after 30 min of EC was only 72.8%. In the presence of sulfite and phosphate with low concentrations, GRs can be stabilized and benefit the removal of Sb(V). We believe this work will provide some new insights on the mechanism of Fe(0) EC and the effective removal of other pollutants during Fe(0) EC process.     

高盐高有机物腌制废水电磁协同处理方法研究

以腌渍生产过程中的实际废水为对象,同时运用电催化氧化、电絮凝和外加磁场的电磁协同方法进行污染物去除效果研究。结果显示,在相同条件下,外加相斥磁场的电磁协同方法具有更好的去除效果,相比未外加磁场的条件,化学需氧量COD(chemical oxygen demand)和氨氮的去除效果分别提高了约20%和30%,能耗降低明显。该方法在一定程度上克服了传统处理方法投资高、运行成本高、运行维护难的缺点,是一种高盐高有机物腌制废水处理的新方法。证明了电磁协同方法在处理难降解废水方面具有应用前景,并可减少二次污染。     

On the Performance of Free Radicals Combined Electrocoagulation Treatment Processes

The electrocoagulation (EC) combined treatment processes have shown promising performances in which the removal of pollutants from industrial wastewater was greatly enhanced. The integration of a free radical producing step with EC has been considered as one of these new combinations that show synergy and improvements in the overall cleaning process performance. This review is devoted to discuss and analyze references on free radicals-assisted EC processes. Different combinations of free radical mechanisms were cited in the literature during the last two decades. They included ozone, advanced oxidation and ultrasound energy-assisted EC. It was noted that most of those studies were lab-scale processes that used synthetic wastewaters rather than real wastewaters. In addition the performances of those combined processes were improved compared to the EC process alone. This review considers the main parameters of free radical EC processes such as mechanisms, kinetic models, scale-up and cost estimation. Many concluding remarks were stated to give insights for possible future investigations. It seems from the results that the ozone-assisted EC is the most efficient combination since its removal efficiency is high in most applications. On the other hand, the combination of ultrasonic energy with EC was reported to reduce electrode passivation.     

The inhibition of corrosion of aluminum in acid environment byin situ electrocoagulation of polybutadienoic acid

The dissolution rate of naked Al sheet in the acidic solutions containing polybutadienoic acid (PBA) with pH value of 0.3∼3.0 at 20∼60°C has been determined by electrometry and gravimetry methods. The form of electroactive Al(III) ions occurred on the anode and the behavior of electrocoagulation of PBA have been approached. The results indicate that the superior condition of electrocoagulation of water-soluble nonsaturable low polymer PBA is the adoption of the electroactive Al(III) ions occurred in electrolyte containing 1.0 g·L⁻¹ PBA+0.2 mol·L⁻¹C₆H₈O₇ citric acid with pH value of 3.0 at 30°C. The mechanism of corrosion-inhibited or electrocoagulation resulted from the electroactive Al(III) ions coordinate-COOH group of PBA and free ions of citric groups into the aluminum soaps with bicyclic structure are briefly discussed in this paper. Supported by the National Natural Science Foundation of China Tao Yingchu: born in 1943, Professor