Extrusion of pastes with a piston extruder for the determination of the local solid and fluid concentration, the local porosity and saturation and displacement profiles by means of NMR imaging

 Nuclear Magnetic Resonance (NMR) was used to investigate the extrusion behaviour of PTFE pastes in a ram extruder. By means of ¹H-NMR imaging (MRI) it is possible to determine the local proton density and therefore, the local fluid concentration. The ¹⁹F-MRI provides the local solid concentration. Thus the local saturation and the local porosity can be calculated with the information of the local fluid and solid concentration. Furthermore displacement profiles can be derived from NMR images by means of correlation techniques without any preparation or marking of the pastes. Received: 8 May 2000   Accepted: 1 May 2001     

粒子-转子模型和推转壳模型中的能谱统计分析

用粒子–转子模型和推转壳模型研究了6个粒子分别填充在单j壳和双j壳上的混沌行为.分析了单j壳和双j壳情况下能谱的最近邻能级间距分布和谱刚度随自旋及推转频率的变化,结果表明,当组态空间大小不变时,系统在双j壳(g_7/2+d_5/2)情况下比在单j壳(i_13/2)情况下更规则,而当组态空间从单j壳(i_13/2)扩大到双j壳(i_13/2+g_9/2)时,系统的混沌程度变化不大.同时比较了将6个粒子的两体相互作用分别取为δ力和对力时的系统的混沌行为     

前缘弯掠斜流转子叶顶间隙流动特性数值分析

本文对前缘弯掠斜流转子叶顶间隙内的流动特性进行了数值分析。结果表明:叶顶间隙气流与主流发生卷吸而生成泄漏涡。泄漏涡作用的区域具有较低的压力分布。在叶片通道内,泄漏涡沿着与转子旋向相反的方向朝相邻叶片的压力面移动。大间隙时的泄漏涡比小间隙时强烈。低流量时泄漏涡的作用区域比高流量时大。在各种流量特性下,叶顶尾缘近吸力面区域都存在着二次间隙流。     

Dependence of the rate constants on the treatment of internal rotation modes: the reaction OH + CH3SH --> CH3S + H2O as an example

The title reaction has been used as an example to test the importance of using a hindered rotor treatment instead of a harmonic oscillator model for calculating vibrational partition functions corresponding to low-frequency internal rotation modes. First, a normal-mode analysis according to the Ayala and Schlegel's algorithm has been used to identify the internal rotation modes of methanethiol and the transition state structure. Then, after calculation of the energy barrier for each internal rotation, the corresponding hindered rotor partition functions have been calculated following the CW scheme of Chuang and Truhlar. The results show that the anharmonic treatment produces a rather modest improvement of the rate constants at room temperature or below.     

Polystyrene prepared by reactive extrusion: kinetics and effect of processing parameters

The conversion and residence time were investigated during the bulk polymerization of styrene in a twin screw extruder. It was found that polymerization mainly occurred in the zone between 400 and 1000 mm along the screw axis in the extruder, corresponding to the residence time of the reactants ranging from 1 to 4 min in the extruder. Furthermore, the processing conditions (feed rate, screw rotation rate) and average molecular weight of the polymer have a great effect on the residence time. Based on dimensionless analysis, a model of the residence time has been built‐up, which has been confirmed by the results of realistic measurements. A kinetic model of the polymerization has also been established under the assumption that the screw extruder can be regarded as an ideal plug flow reactor. Copyright © 2004 John Wiley & Sons, Ltd.     

关于对流方程的一类三层显格式

本文对对流方程ut＝aux建立了中间层包含两个节点,带两个参变量m,k的一般三层显格式．当m,k满足一定关系时,上述格式变为二阶格式．稳定性分析表明,当参数k＜1／2时,格式的稳定条件为网格比的绝对值不超过1,这一点区别于色散方程的类似情况．     

Fluorescent probes for detection of amphiphilic polymer hydrophobic microdomains: A comparative study between pyrene and molecular rotors

 Cationic amphiphilic polymers (e.g. polyvinylpyridinium bromides and polyvinylimidazo-lium bromides) adopt a compact coiled form in aqueous solutions. In the case of former polymers, the resulting hydrophobic microdomains are evidenced only by fluorescence spectroscopy if a molecular rotor (DMAC) is used as a fluorescent probe, while the behaviour of the latter can be studied in aqueous solution by using both types of fluorescent probes, i.e., pyrene and the molecular rotor. The purpose of the present investigation deals with a comparative study between the magnitude of the local viscosity and the polarity of the hydrophobic microdomains generated by poly(3-hexadecyl-1-vinylimidazolium bromide) in an aqueous medium using pyrene and DMAC as fluorescent probes. Moreover, the results are compared with the data obtained with micelles of conventional surfactants such as the homopolymer repetitive unit model and CTAB. Received: 3 June 1996 Accepted: 29 September 1996     

钢筋混凝土桥墩压弯承载力统一算法

针对钢筋混凝土桥墩压弯承载力的计算，提出了基于极限状态的截面应力-应变关系，并分别以等效矩形应力图和混凝土应力-应变公式处理受压区混凝土的抗力计算图式，将轴压-压弯-纯弯的计算方法统一起来，使计算更简捷，最后给出工程应用实例．     

罗茨泵“8“字形转子渐开线曲面加工的探讨

渐开线曲面因其特性和成熟的加工方法被广泛应用于机械工程中.罗茨泵中转子上的渐开线曲面,常用的加工方法有数控镗铣、仿形铣、仿形刨等.本文通过对渐开线曲面形成和特性的分析,给出了在牛头刨床上用展成法加工渐开线曲面的方法.