基于动态优化双钻头打孔机生产效能的研究

首先,对孔型加工及走刀方式进行分析,为提高打孔机效能,采用两钻头同时作业的方式。然后,根据相关的数据,应用动态优化的相关理论建立数学模型,并运用遗传算法进行求解,从而确立了双钻头作业时的最优作业线路、最佳行进时间和作业成本,并用MATLAB编写程序画出了相应图形,更加形象地显现出了各个路段的最优作业方案。     

Experimental and numerical analysis of cylindrical turbulators in a double pipe heat exchanger under turbulent flow conditions

In the present work, the use of cylindrical turbulators in a double pipe heat exchanger has been investigated. Cylindrical fin type of turbulators has been placed circumferentially separated by 90° on the outer side of an inner pipe at a regular pitch. Experimental studies were undertaken for different air flow rates in a turbulent regime whose Reynolds number range between 2500 and 10000. Heat transfer characteristics like Nu and friction factor have been experimentally determined. Parametric studies were conducted by changing the pitch and also the orientation of the turbulators. Nu and friction factor were found to increase as the pitch is reduced. A model with alternatively changed orientation outperformed others by exhibiting highest Nu and reduced friction factor.     

LaMnO3不同晶位掺杂的磁电阻效应

基于研究钙钛矿型氧化物磁电阻效应的目的,采用固相反应法制备了实验所需的单相多晶样品,主要就La位二价金属离子掺杂和稀土互掺及Mn位掺杂对LaMnO3磁电阻影响的实验结果作比较研究,发现La位稀土互掺对磁电阻的影响可以用晶格效应来解释,并明确指出La位和Mn位掺杂是提高和调制钙钛矿型锰氧化物超大磁电阻效应的一种有效途径.     

机立窑鼓风机采用调速装置的探讨

介绍了机立窑鼓风机调速装置的工作原理和工作效果．提出了风机的选型原则。     

双层钙钛矿Sr2FeMoO6，Ba2FeMoO6的电磁性质研究

分析了双层钙钛矿结构的锰氧化合物Sr2FeMoO6,Ba2FeMoO6物相结构和电磁学性质,对巨磁阻效应进行了探讨,揭示了Sr2FeMoO6样品为半导体导电性,Ba2FeMoO6样品为金属导电性.     

广义C-R组的性质及两个边值问题

本文考虑广义C-R组^[1](H)的解f=u iv jw∈C^2的一些性质，提出与之相关的两个边值问题，用积分方程方法和调和函数性质证明了边值问题解的存在唯一性，并写出解的积分表达式．     

New functionalized polyesters to achieve controlled architectures

Following our continued interest in the production of bioerodible and biodegradable functional polymers for biomedical applications, we synthesized and characterized new unsaturated polyesters. The presence of functional groups in the polymer backbone provided sites for chemical modification, and through a variation in the structure, the physical properties, such as the hydrophilicity and solubility, could be affected. With 1,1-di-n-butyl-stanna-2,7-dioxacyclo-4-heptene as the initiator in the ring-opening polymerization of polyesters, a new set of functionalized polyesters was created. The polymerization of ϵ-caprolactone resulted in poly(ϵ-caprolactone) with a double bond incorporated into the structure. The polymers were obtained in a controlled manner with low molecular dispersities. The double bond was previously incorporated into L -lactide polymers, and the two reactions were compared in this study. The conversion of ϵ-caprolactone, with a degree of polymerization of 50, was completed within 140 min, whereas for L -lactide, only a 45% conversion took place in the same period of time. The dispersities were somewhat higher with ϵ-caprolactone because of the higher reaction rate and, therefore, lower selectivity. The incorporated CC double bond in the polyesters provided a variety of opportunities for further modifications. In this case, the double bond of the L -lactide macromonomers was oxidized into epoxides. Epoxidation was carried out with m-chloroperoxybenzoic acid as a chemical reagent. The conversion of the double bonds into epoxides was completed, and the obtained yields were good (>95%). As a result of the mild reaction conditions, the epoxidation of the double bond was carried out quantitatively without any side reactions. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 444–452, 2004     

高精度的光纤衰减系数测试系统的设计

利用常规仪器设备，设计了一套集光、机、电为一体的光纤衰减测量,实现了数字化监测显示，并可与微机接口；采用双光路法，消除了由于光源光强不稳定产生的误差。