Flow-induced shear stress and deformation of a core–shell-structured microcapsule in a microchannel

A numerical model was developed and validated to investigate the fluid–structure interactions between fully developed pipe flow and core–shell-structured microcapsule in a microchannel. Different flow rates and microcapsule shell thicknesses were considered. A sixth-order rotational symmetric distribution of von Mises stress over the microcapsule shell can be observed on the microcapsule with a thinner shell configuration, especially at higher flow rate conditions. It is also observed that when being carried along in a fully developed pipe flow, the microcapsule with a thinner shell tends to accumulate stress at a higher rate compared to that with a thicker shell. In general, for the same microcapsule configuration, higher flow velocity would induce a higher stress level over the microcapsule shell. The deformation gradient was used to capture the microcapsule's deformation in the present study. The effect of Young's modulus on the microcapsule shell on the microcapsule deformation was investigated as well. Our findings will shed light on the understanding of the stability of core–shell-structured microcapsule when subjected to flow-induced shear stress in a microfluidic system, enabling a more exquisite control over the breakup dynamics of drug-loaded microcapsule for biomedical applications.     

基于动态优化双钻头打孔机生产效能的研究

首先,对孔型加工及走刀方式进行分析,为提高打孔机效能,采用两钻头同时作业的方式。然后,根据相关的数据,应用动态优化的相关理论建立数学模型,并运用遗传算法进行求解,从而确立了双钻头作业时的最优作业线路、最佳行进时间和作业成本,并用MATLAB编写程序画出了相应图形,更加形象地显现出了各个路段的最优作业方案。     

Logarithmic Regge pole

This work presents the subtraction procedure and the Regge cut in the logarithmic Regge pole approach. The subtraction mechanism leads to the same asymptotic behavior as previously obtained in the non-subtraction case. The Regge cut, in contrast, introduces a clear role to the non-leading contributions for the asymptotic behavior of the total cross-section. From these results, some simple parameterization is introduced to fit the experimental data for the proton-proton and antiproton-proton total cross-section above some minimum value up to the cosmic-ray. The fit parameters obtained are used to present predictions for the \begin{document}$ \rho(s)$\end{document} -parameter as well as to the elastic slope \begin{document}$ B(s)$\end{document} at high energies.     

Role of FTFSI Anion Asymmetry on Physical Properties of AFTFSI (A=Li,Na and K) Based Electrolytes and Consequences on Supercapacitor Application

This study compares the physicochemical properties of six electrolytes comprising of three salts: LiFTFSI, NaFTFSI and KFTFSI in two solvent mixtures, the binary (3EC/7EMC) and the ternary (EC/PC/3DMC). The transport properties (conductivity, viscosity) as a function of temperature and concentration were modeled using the extended Jones-Dole-Kaminsky equation, the Arrhenius model, and the Eyring theory of transition state for activated complexes. Results are discussed in terms of ionicity, solvation shell, and cross-interactions between electrolyte components. The application of the six formulated electrolytes in symmetrical activated carbon (AC)//AC supercapacitors (SCs) was characterized by cyclic voltammetry (CV), galvanostatic cycling with potential limitation (GCPL), electrochemical impedance spectroscopy (EIS) and accelerated aging. Results revealed that the geometrical flexibility of the FTFSI anion allows it to access and diffuse easily in AC whereas its counter ions (Li⁺, Na⁺ or K⁺) can remain trapped in porosity. However, this drawback was partially resolved by mixing LiFTFSI and KFTFSI salts in the electrolyte.     

Experimental and numerical analysis of cylindrical turbulators in a double pipe heat exchanger under turbulent flow conditions

In the present work, the use of cylindrical turbulators in a double pipe heat exchanger has been investigated. Cylindrical fin type of turbulators has been placed circumferentially separated by 90° on the outer side of an inner pipe at a regular pitch. Experimental studies were undertaken for different air flow rates in a turbulent regime whose Reynolds number range between 2500 and 10000. Heat transfer characteristics like Nu and friction factor have been experimentally determined. Parametric studies were conducted by changing the pitch and also the orientation of the turbulators. Nu and friction factor were found to increase as the pitch is reduced. A model with alternatively changed orientation outperformed others by exhibiting highest Nu and reduced friction factor.     

LaMnO3不同晶位掺杂的磁电阻效应

基于研究钙钛矿型氧化物磁电阻效应的目的,采用固相反应法制备了实验所需的单相多晶样品,主要就La位二价金属离子掺杂和稀土互掺及Mn位掺杂对LaMnO3磁电阻影响的实验结果作比较研究,发现La位稀土互掺对磁电阻的影响可以用晶格效应来解释,并明确指出La位和Mn位掺杂是提高和调制钙钛矿型锰氧化物超大磁电阻效应的一种有效途径.     

一类图的强最大亏格嵌入

图的嵌入理论是拓扑图论中一个中心课题.图的最大亏格嵌入的刻画和研究已较完善.但对于强嵌入,这方面的讨论却很少.本文对于平面上的不含不交(指无公共节点)圈的图以及完全图K5,利用构造强最大亏格嵌入的方法,给出了强最大亏格.同时,也给出了完全二部图K3,k(k≥3)的不可定向强最大亏格的一个下界.     

铝电解中的阴极过程

对铝电解中的阴极反应、阴极过电压、阴极表面的双电层结构等阴极过程进行了研究,发现在+005～-005V(相对于铝阴极)电位区有一个还原电流峰和一个氧化电流峰,它们是Al3++3e→Al和Al-3e→Al3+·与阳极相比,阴极过电压较小,在001～3A/cm2的Taffel区,约为01V·在阴极表面的双电层中,第一层为Ca2+,Mg2+,Li+和Al3+离子,没有Na+离子,这说明,阴极过电压是因为Mg2+,Ca2+等离子形成的电化学双电层阻力所引起,同时也说明别略耶夫猜想基本是正确的·     

现代信息技术在大学英语教学中的应用

从信息技术的发展趋势入手,分析了信息技术在英语教学中的应用现状,提出了进一步加强信息技术与英语教学整合的措施。     

双层钙钛矿Sr2FeMoO6，Ba2FeMoO6的电磁性质研究

分析了双层钙钛矿结构的锰氧化合物Sr2FeMoO6,Ba2FeMoO6物相结构和电磁学性质,对巨磁阻效应进行了探讨,揭示了Sr2FeMoO6样品为半导体导电性,Ba2FeMoO6样品为金属导电性.