基于多环返工串行生产线的性能优化建模

为评价和优化串行多环返工生产系统的生产性能表现，结合质量管理与精益生产的理念，区别于传统的返工机制，提出一种全新的“即刻返工”检查机制，将生产系统建模扩展至多机多缓冲区的复杂生产系统.基于生产系统的两大要素，机器与缓冲区的生产状态变化，依据概率论与马氏定理，构建缓冲水平的动态概率转移矩阵，以在制品库存水平及系统平均生产率作为研究指标，针对生产设备及缓冲区展开瞬态分析，通过迭代计算，表明设置合理的系统规模与缓冲区阈值能达到优化系统生产性能的目的，并通过数值实验验证其有效性.     

面心立方晶体外延膜沉积生长中失配位错的结构与形成过程

用分子动力学方法对5%负失配条件下面心立方晶体铝薄膜的原子沉积外延生长进行了三维模拟.铝原子间的相互作用采用嵌入原子法(EAM)多体势计算.模拟结果再现了失配位错的形成现象.分析表明，失配位错在形成之初即呈现为Shockley扩展位错，即由两个伯格斯矢量为〈211〉/6的部分位错和其间的堆垛层错组成，两个部分位错的间距、即层错宽度为1.8 nm,与理论计算结果一致；外延晶体薄膜沉积生长中，位错对会发生滑移，但其间距保持稳定.进一步观察发现，该扩展位错产生于一种类似于“局部熔融-重结晶”的表层局部无序紊乱- 关键词： 失配位错 外延生长 薄膜 分子动力学 铝     

Dislocation unpinning model of acoustic emission from alkali halide crystals

The present paper reports the dislocation unpinning model of acoustic emission (AE) from alkali halide crystals. Equations are derived for the strain dependence of the transient AE pulse rate, peak value of the AE pulse rate and the total number of AE pulse emitted. It is found that the AE pulse rate should be maximum for a particular strain of the crystals. The peak value of the AE pulse rate should depend on the volume and strain rate of the crystals, and also on the pinning time of dislocations. Since the pinning time of dislocations decreases with increasing strain rate, the AE pulse rate should be weakly dependent on the strain rate of the crystals. The total number of AE should increase linearly with deformation and then it should attain a saturation value for the large deformation. By measuring the strain dependence of the AE pulse rate at a fixed strain rate, the time constantτ _s for surface annihilation of dislocations and the pinning timeτ _p of the dislocations can be determined. A good agreement is found between the theoretical and experimental results related to the AE from alkali halide crystals.     

Micromechanisms and Mechanics of Damage and Fracture in Thin Film/Substrate Systems

The purpose of this paper is to review the mechanisms and available theoretical methods for modeling the strength and failure of thin film/substrate systems     

预应力混凝土框架的反复荷载试验及有限元全过程滞回分析

本文进行了有粘结和无粘结预应力混凝土框架的反复荷载试验。结果表明,试件能够形成塑性铰;有粘结框架的耗能量大于无粘结框架,但无粘结框架的残余变形比有粘结框架小:试验后无粘结框架的预应力损失可略去不计,而有粘结框架在塑性铰处的预应力损失则达70%。本文提出的算法实现了预应力框架包括下降段在内的有限元全过程滞回分析,同时也可适用于非预应力框架。     

STUDY ON THE DUCTILE DEFORMATION DOMAIN OF THE SIMPLE SHEAR IN ROCKS——TAKING BRITTLE FAULTS OF THE COVERING STRATA IN THE SOUTHERN JIANGSU AREA AS AN EXAMPLE

A study on the ductile deformation domain of the brittle fault in the shallow level ofthe crust is a new probe field for the modern structural geology. Taking the southern Jiang-su Province area as an example the orientation measurement of quartz crystals, the com-positional texture observation of three pressure sensitive minerals and the rheological param-eter determination of dislocation densities, etc. have been demonstrated and analysed basedon typical samples in the present paper. In addition, their generation mechanisms arealso discussed from the cataclastic rheology, the dynamic differentiation and the simpleshearing, specially, from the Ode strength theory. Finally, a generative relationship betweenthe ductile deformation domain of the brittle fault system, in the regional layer--slip andthe formation of the stratabound ore deposit is shown as well.     

Nitrogen Adsorption Study of MCM-41 Molecular Sieves Synthesized Using Hydrothermal Restructuring

Nitrogen desorption scanning hysteresis loops (DSHLs) for large-pore MCM-41 silicas (pore diameter from 4.0 to 6.5 nm) are reported for the first time. DSHLs for MCM-41 were compared with those of conventional mesoporous silicas and no appreciable differences were found, although hysteresis loops and DSHLs for the latter were usually broader. Since desorption behavior of conventional porous silicas is appreciably influenced by pore connectivity, the observed similarity in hysteresis behavior suggests single-pore blocking effects for MCM-41 due to variation of pore diameter along its nonintersecting channels. It was also shown that the steepness of nitrogen desorption branches at relative pressures close to 0.4 often results from proximity of the lower pressure limit of adsorption-desorption irreversibility and consequently it is not justified to consider it as an indication of narrow pore size distribution. Thus, application of desorption data in calculations of pore size distributions may be grossly misleading.     

Succession of stacking disorder in hard-sphere crystal under gravity by Monte Carlo simulation

We have performed Monte Carlo simulations of hard spheres under gravity. Vertical boundaries are hard walls, which are well separated with each other. On the other hand, the periodic boundary condition is imposed in the horizontal direction. While we previously reported enhancement of crystallinity as well as crystallization due to gravity, we present here the results that demonstrate the succession of a defect. In case that the crystal formed at the bottom of the system includes kinds of stacking disorders for the (0 0 1) growth, twin band structure develops as mediated by a stacking disorder succeeded in the crystal formed in the fluid region which lies on the bottom crystal. In case that the stacking structure along horizontal direction changes from the (1 1 1) stacking to the (0 0 1) stacking, twin band structure in the (0 0 1) stacking region develops as succeeded in the crystal transformed. The twin band structure also becomes large with its upward growth.     

纵向剪切下螺型位错和圆形夹杂界面裂纹的干涉作用

研究了无穷远纵向剪切下圆形弹性夹杂界面裂纹与基体中任意位置螺型位错的相互干涉问题。运用复变函数的解析延拓技术与奇性主部分析方法，获得了该问题的一般解答，作为算例，求出了含一条界面裂纹时基体和夹杂区域应力函数的封闭形式解，导出了位错在基体中任意位置时位错力的计算公式，数值结果表明，界面裂纹对位错与夹杂的干涉作用具有强烈的扰动效应，当界面裂纹达到一定弧度时，可以将硬夹杂对位错的排斥作用改变为吸引。     

锁相环路计算机辅助分析的一种方法

提出了一种面向系统数学模型的模块连接式锁相环路计算机辅助分析方法，利用该方法，可对任意类型锁相环路的工作过程，时域特性，频域特性，捕捉过程及输入叠加噪声对锁相环路的影响等多方面进行计算机辅助分析，其特点是：１）原理简明，编程简单；２）不受锁上环咱阶数，输入信号形式及鉴相器类型的限制，可分析各种线性及非线性的锁相环路，适应能力强；３）可分析随机叠加输入噪声对锁相环路性能的影响，４）锁相五路各点工作状